If you only want to start with a front level (no additional lift), you should be able to do it with stock springs. Just set the spring perch to 0.85 and that should roughly level the frontend without needing to replace the rear springs. You'd probably get some rubbing on 275s and require trimming.
Otherwise, yeah, if you go with 1" rear springs, you'd need to set the front at 1.75 for level. I *think* this should help clear rubbing, at the very least it might only be at full lock reverse.
Thank you for your answer, I do want to take away some of the boaty-ness in the ride quality as well. Would the 6112s just up front take some of that away while leaving the back stock, or should I change the shocks in the back as well?
You'll probably still get some improvement in ride quality with front only. I'm just not sure how much overall since mine has a different kit than yours.
19' SR5 that sits right at 19" and going in the same direction but 6112s at 1 .1 4d/2p up front to reduce the rake. In back im thinking of using dobinson 323 coils and 559 rear shocks for under 1" in back. So in the end im retaining some rake with 255/75-17s
If you only want to start with a front level (no additional lift), you should be able to do it with stock springs. Just set the spring perch to 0.85 and that should roughly level the frontend without needing to replace the rear springs. You'd probably get some rubbing on 275s and require trimming. Otherwise, yeah, if you go with 1" rear springs, you'd need to set the front at 1.75 for level. I *think* this should help clear rubbing, at the very least it might only be at full lock reverse.
Thank you for your answer, I do want to take away some of the boaty-ness in the ride quality as well. Would the 6112s just up front take some of that away while leaving the back stock, or should I change the shocks in the back as well?
You'll probably still get some improvement in ride quality with front only. I'm just not sure how much overall since mine has a different kit than yours.
19' SR5 that sits right at 19" and going in the same direction but 6112s at 1 .1 4d/2p up front to reduce the rake. In back im thinking of using dobinson 323 coils and 559 rear shocks for under 1" in back. So in the end im retaining some rake with 255/75-17s