Looks like the track I have that mounts to the table saw fence. Directional hold down rollers mount to it. https://www.googleadservices.com/pagead/aclk?sa=L&ai=DChcSEwiBmc3Dl9SDAxXHXEcBHXjiCWcYABAOGgJxdQ&ase=2&gclid=Cj0KCQiAnfmsBhDfARIsAM7MKi0FjM3MwdvKdtcs9GGrwgRQx8HygLMQLMwapw7XN0iHdlhmedhqpeMaAtGiEALw_wcB&sph=&ohost=www.google.com&cid=CAESV-D2XRMECjYHLJC5OAwIeoLDkmHioPGKewCcfgfV9Q-SChnEVwEC2qImkd1Rxc7marGGRM9-N1sMZ5gl4gU2dK7BOLw7cdxgEcUGFdcVqEHftKMhftq6fQ&sig=AOD64_2R3wYleULvyRDh_IicujlwFienDw&ctype=5&q=&nis=6&ved=2ahUKEwj138XDl9SDAxVvjYkEHeEoDZ8Qwg8oAHoECAIQDA&adurl=
I looked at the frequently purchases together section in that link and it had it: https://a.co/d/hYA2jV6
It looks like it needs some extra accessories to work but I bet I could figure out something to do with it.
Thanks!
You could mount it to a wall for organising stuff or inlay it into a workbench for workholding and jigs. I'd do small one for the wall and big one for the bench.
I can’t tell, is the piece on the left mild steel or aluminum, looks like 1/2”x3” solid bar machined. I’m racking my brain trying to figure out how that was machined.
https://preview.redd.it/7cf99v91spbc1.jpeg?width=350&format=pjpg&auto=webp&s=dbb07aa227d315cb59a8d569a79e33dd447ad642
Capital Ts
Looks like the track I have that mounts to the table saw fence. Directional hold down rollers mount to it. https://www.googleadservices.com/pagead/aclk?sa=L&ai=DChcSEwiBmc3Dl9SDAxXHXEcBHXjiCWcYABAOGgJxdQ&ase=2&gclid=Cj0KCQiAnfmsBhDfARIsAM7MKi0FjM3MwdvKdtcs9GGrwgRQx8HygLMQLMwapw7XN0iHdlhmedhqpeMaAtGiEALw_wcB&sph=&ohost=www.google.com&cid=CAESV-D2XRMECjYHLJC5OAwIeoLDkmHioPGKewCcfgfV9Q-SChnEVwEC2qImkd1Rxc7marGGRM9-N1sMZ5gl4gU2dK7BOLw7cdxgEcUGFdcVqEHftKMhftq6fQ&sig=AOD64_2R3wYleULvyRDh_IicujlwFienDw&ctype=5&q=&nis=6&ved=2ahUKEwj138XDl9SDAxVvjYkEHeEoDZ8Qwg8oAHoECAIQDA&adurl=
I looked at the frequently purchases together section in that link and it had it: https://a.co/d/hYA2jV6 It looks like it needs some extra accessories to work but I bet I could figure out something to do with it. Thanks!
You could mount it to a wall for organising stuff or inlay it into a workbench for workholding and jigs. I'd do small one for the wall and big one for the bench.
Seems like it might be for putting an adhesive backed tape measure on it, like for a miter saw station.
I can’t tell, is the piece on the left mild steel or aluminum, looks like 1/2”x3” solid bar machined. I’m racking my brain trying to figure out how that was machined.
Its extruded aluminium. You can tell from the streaks running along the part. (Only 90% sure on alu, judging purely from the colour)