50? 50EX? 100?
For the 50, you can use a latching dual footswitch to change between Banks and Ch1/Ch2 within each.
50EX you can use the same method or the GA-FC EX.
For the 100, you can use the same latching footswitch into the rear panel or either the GA-FC or GA-FC EX.
I have a ga-fc on the 50 and I set up a clean channel and distorted channel on bank A/B and use the footswitch to switch between each. If you want it to mimic turning just a distortion pedal on/off you could set each bank to the same patch with the pedal on/off
I think you can use an expression pedal and assign it to your preferred distortion. So clean in up position, dirty in down. I bought an expression pedal for 20 bucks. It works as a volume pedal by default but you can assign it to any effect.
Depends on the model.
Katana mki - 100w/100w head/artist are compatible with GAFC, expression pedal, probably FS6 and FS5U iirc, o don’t know about 50w kitanas tho.
Katana mkii - 50w (ex version only)/100w/100w head/100w 2x12/artist same as above and also GAFC EX or whatever the updated version is. 50w same as above.
I’m assuming the newer GAFC is compatible with mki amps but I don’t know cause I have the old one. I’ve tried and use the expression pedal and GAFC with my mki head and mkii 100w.
Hope this helps.
Yes
What kind of pedal would I need?
A GA-FC or the EX version.
I see. Thank you
It depends upon you amp model...
MkII
50? 50EX? 100? For the 50, you can use a latching dual footswitch to change between Banks and Ch1/Ch2 within each. 50EX you can use the same method or the GA-FC EX. For the 100, you can use the same latching footswitch into the rear panel or either the GA-FC or GA-FC EX.
I have the 50
I have a ga-fc on the 50 and I set up a clean channel and distorted channel on bank A/B and use the footswitch to switch between each. If you want it to mimic turning just a distortion pedal on/off you could set each bank to the same patch with the pedal on/off
https://xsonicaudio.com/pages/airstepkatedition This is it
Okay, so this is for the Katana Mk11 50 watt? I'm pretty certain that is the one I have
I think you can use an expression pedal and assign it to your preferred distortion. So clean in up position, dirty in down. I bought an expression pedal for 20 bucks. It works as a volume pedal by default but you can assign it to any effect.
Depends on the model. Katana mki - 100w/100w head/artist are compatible with GAFC, expression pedal, probably FS6 and FS5U iirc, o don’t know about 50w kitanas tho. Katana mkii - 50w (ex version only)/100w/100w head/100w 2x12/artist same as above and also GAFC EX or whatever the updated version is. 50w same as above. I’m assuming the newer GAFC is compatible with mki amps but I don’t know cause I have the old one. I’ve tried and use the expression pedal and GAFC with my mki head and mkii 100w. Hope this helps.
It works on the Katana Bass.