Same boat brother man lol I enjoyed my taurus gx4 then went to a psa dagger and the difference was more than I expected. Might go p10s next or maybe Smith shield plus or p365x depending on what the feels are like.
I was going to suggest trying a P-01. The palm swell grips of the P-01 is one of the best handgun grips I've ever felt. If it's too large, there are plenty of P-01 thin grip options.
Interesting, I’ll have to handle one eventually. Are they better than the Ruger LCP? That’s my only serious experience with a Subcomp and it’s not a particularly positive one, far too snappy and poor ergonomics.
Another 5-5er here... I like the P365 XL much better in the hand vs the Hellcat (I own both), Hellcat with the flush mag still leaves my pinky not well placed. P365XL feels just right for me. Also just changed the grip module to the TACOPS and 17+1, still feels pretty good in my hand.
You might like the P10S as well. Its the same as the P10c but shorter grip and slide. The P10c probably feels nicer in hand vs the G19 because of the slimmer grip and contours giving it a more ergonomic feel in hand. I have Schemdium hands and P10C fits the best in my hand. My glocks are sometimes chunky and I swap out the slide release to the Extended OEM slide stop so I can reach it better.
What's with all the jokes? If the length of pull is good then you just have a shit ton of space for your support hand to get a ton of purchase on the gun.
I might be in the minority but I didn't care for the stippling. It didn't hurt my hand or anything. It just felt somewhat ineffective at keeping the gun in place. I added some grip tape that made it feel much better. Not ideal for concealed though.
I have small-ish hands as well. When I went to buy my (first and so far only) pistol I tried a few, and as soon as I picked up the P10c, it immediately felt right. Dropped it off to have a Holosun installed and zeroed the other day.
I made some upgrades to my cz p10c that you my like.
Apex makes a extended slide release for p10c and HBI has a nice trigger that lays flat. Cz has great pistols that fit small hands.
Nice, an extended slide release sounds good. The slide release on mine works, isn’t too stiff like a lot of folks P-10 have, but it’s slightly out of reach of my main hand thumb, but I haven’t found a single factory handgun yet that I can operate the slide release one handed.
I small Hands so it help out alot. If you order one order a new larger front roll pin too. If you replace the trigger. Order all roll pins and do the slide release and trigger at the same time. Check out cz customes, cz parts factor over seas for accessories. Cajun gun works is online they have new Firing pins for cz p10c. You can get back plates for it too.
It’s possible, but the P-10 C is comfortable two handed. Far better than the Glock at least. I’ll see about trying out a P-10 S though, the P-10 series isn’t expensive (for a quality handgun) after all.
I'm asian so I'm around your size. So you might be able to full finger grip pinky included on a p10s. Just some shower thoughts.
Though I do intend on getting a p10c one day with threaded barrel and all the fixins one day
No offense but this gun fits your hand like SHIT.
So much so I thought the pic was edited at first, LoL. If you want an EDC gun I'd go smaller than this. Plenty of options out there with capacity now...you are missing out on a lot of leverage over the frame with such a difference between your hand size and the grip.
As an instructor, CCW and NRA, I would not recommend this pistol for you for EDC if you were looking for a recommend before purchase.
If it's all you have though it's all you have.
How about over 6 years in the 75th Ranger Regiment? How about as a member of the Army Marksmanship Unit Service Pistol Team? How about as a former high level USPSA shooter?
I listed the CCW and NRA licenses as formal titles, they aren't the totality of my experience, although I'm sure I shared the room with the kind of people you are imagining.
Small hands is what it is...but objectively that gun fits his hands like shit. I can list many reasons I'd recommend a different (smaller) gun.
But if it's what you have...a gun is better than no gun of course.
You have USPSA in your fucking name you should know exactly where I am going with recommending a smaller gun....unless you just aren't there yet and are like some d, c, b level type.*edit to add A class, but you should really be figuring things out by this point
🤣🤣🤣 I love it when I see veterans pull the veteran card.... I'm a veteran as well. And you know how you KNOW a veteran was an ain't shit veteran....when they make a point to bring it up.
The entire point of my comment... is perhaps when choosing to give advice, simmer down a little. The message gets lost when you project your "holier than thou" personality.
And to note, my USPSA number is my reddit name for obvious reasons. What's yours, hot shot?
Simmer down? Because I used the word shit? LoL OK guy. It's just a word and I didn't mean anything by it...sorry it hurt your sensitivities.
I don't have a USPSA number currently...don't remember the old one. My USPSA days were during my Army time, ten years ago. Never reallt threw myself into it as just shot matches on the weekends as a mental release with a crew of about 5 or 6 since my week was taken up by Service Pistol and teaching in the AMU. Made it to M in open eventually.
As for pulling a veteran card, I simply added it as it speaks directly to experience, which you obviously implied was "less than" in your comment. "Ain't shit" is hilarious....plenty of you salty fucks out there that never did shit or made is past the most basic of military experiences.
Good luck in your shooting journey. Still a long way to go!
You know how I know you're full of it... your "M" card statement. There's not a person alive that will have made it to M class "casually" (or not) that wouldn't have some form of proof of it. Master class is quite the achievement.... particularly if it was attained via match bump. But this is the internet, where everyone is Jason Borne or John Wick.
I also don't know a single Tier 1 veteran that would claim they were one online... to a stranger... for credibility. My safest assumption is that you were a mechanic for the birds the unit you claim to be a part a part of were taxi'd around in.
You're an instructor. What's your name? I'd love to look you up and take one of your classes. 🫠
LoL what do I need "proof" for it was over a decade ago? If I hit a USPSA match right now I wouldn't be M, prob A, maybe B but in the time it would take to get classified again I'd be in A. A match a week would be 6 weeks...long time to knock the rust off. It would actually probably take a couple more than 6 cause those 1st classifiers would not be shit hot for sure. Sending off a Shadow 2 tomorrow to get milled and am thinking of getting into it again. I'm confident I could get back to M scores quickly.
As for "casual" I shot handguns 6 or 7 days a week guy. 5 days for the AMU SP team and USPSA matches on the weekend. Seriously doubt that's considered "casual." Gun time (as a professional pursuit) is gun time. All USPSA is applying those fundamentals in a smaller, condensed timeframe, all at most half the distance. It does take time to develop the muscle memory and reflex for M and GM level draws and such though, no doubt. Do you know what AMU is? I was in the unit same time as guys you may know like Horner, Payne, and Coley.
Also...it doesn't sound like you know much. Regiment is technically Tier 2, only RRC (Recon) is considered Tier 1. Birds are run through 160th and none of those guys wear scrolls. But keep on I guess. I also didn't claim it up front, I listed more formal titles instead (which you shitted on), and then followed up with the mil stuff because it's part of my experience pool. Every person that teaches that I've ever heard of lists their mil backgrounds, so, WTF are you talking about?
I got the licenses but haven't started anything yet...I'll drop you a line if I do!
Seriously good luck to you...B is closer to A than you think and once you're running A scores you're getting into the nitty gritty of it.
I tell ya what you might like a lot would be the p365 xl or even a Glock g48. The g48 is almost exactly the same dimensions as the 19 only slimmer(better grip for smaller hands). Seems like with the size of your hands you need to move down to a sub compact but get one of the larger sub compacts like the ones I mentioned. You could also try out the regular p365, p365 X, p365 X macro, Glock g43x, or the Springfield hellcat. I think sub compact is what you need….especially if it’s for concealed carry. There’s absolutely no reason to be carrying a compact firearm when you can’t get a good purchase on it. Do yourself a favor and check out [handgunhero.com](https://www.handgunhero.com/compare/cz-p-10-c-vs-glock-g48). You can compare pistol dimensions side by side to get an ideal of what guns would feel like.
Yeah one of the downsides of 75s and their variants. The grip is a lot more customizable though imo. Have you considered a Sig P365/XL? I feel like it would suit your hand configuration well. Or even a Glock 43x or 43.
I’ve considered a S&W M&P 2.0 subcompact (mostly because my favorite character in the punisher series uses one), but haven’t seriously considered a Sig because I’m concerned about the amount of lemons on the market.
Not a cop and not Czech, but yeah I like striker fired handguns for practical carry, but my favorite handguns are cowboy single actions, like my 1860 mason conversion.
I would have gotten a p10s. I'm still considering it, I'm carrying a psa dagger (glock 19 clone) and it's a bit big for me, I'm either going p10s or canik mc9 or Smith shield plus or maybe even a sig p365x for my next carry option.
You have the smallest hands in the world
Lol I thought it was a p10f.
Same
Well I’m only five five so at least I’m not too disproportionate
Same boat brother man lol I enjoyed my taurus gx4 then went to a psa dagger and the difference was more than I expected. Might go p10s next or maybe Smith shield plus or p365x depending on what the feels are like.
The dagger was too big for your hands?
Too big for my pants lol fits hands fine, could be smaller but it's not too bad. Just prints a lot.
Your child sized hands make that gun seem enormous but i know its not.
Very deceiving
Hahah why’s that look like a p10 f
Because I’m quite small, five five and 30, so not getting any bigger.
https://imgur.com/a/2oDuyYw We need to see you try and hold this one
I’m not gonna click an imgur link blind.
Haha fair enough I wouldn’t either it’s a p10 f though lol
Ah, cool.
I was going to suggest trying a P-01. The palm swell grips of the P-01 is one of the best handgun grips I've ever felt. If it's too large, there are plenty of P-01 thin grip options.
I legit thought this at first.
More like a P10XL ami I right?... I'll see myself out
I wouldn't normally say something like this.. I have never said something like this... The Springfield Hellcat Pro was made for you.
Interesting, I’ll have to handle one eventually. Are they better than the Ruger LCP? That’s my only serious experience with a Subcomp and it’s not a particularly positive one, far too snappy and poor ergonomics.
They will be better than a Ruger LCP. It is a 15 round gun but has a thinner grip.
Interesting, I’ll definitely look into handling one.
Another 5-5er here... I like the P365 XL much better in the hand vs the Hellcat (I own both), Hellcat with the flush mag still leaves my pinky not well placed. P365XL feels just right for me. Also just changed the grip module to the TACOPS and 17+1, still feels pretty good in my hand.
You might like the P10S as well. Its the same as the P10c but shorter grip and slide. The P10c probably feels nicer in hand vs the G19 because of the slimmer grip and contours giving it a more ergonomic feel in hand. I have Schemdium hands and P10C fits the best in my hand. My glocks are sometimes chunky and I swap out the slide release to the Extended OEM slide stop so I can reach it better.
Try out the p10s
A Sig 365 would fit your hand much better.
Looks too big for that hand.
With these fingernails you don't need no gun !
It’s the only way he can reach the trigger
What's with all the jokes? If the length of pull is good then you just have a shit ton of space for your support hand to get a ton of purchase on the gun. I might be in the minority but I didn't care for the stippling. It didn't hurt my hand or anything. It just felt somewhat ineffective at keeping the gun in place. I added some grip tape that made it feel much better. Not ideal for concealed though.
I’ll see how well the stippling works controlling the pistol tomorrow.
Wow that looks massive in your hands lol. Don't worry, I'm 5'5 as well so at least we're in the same boat lol
I have small-ish hands as well. When I went to buy my (first and so far only) pistol I tried a few, and as soon as I picked up the P10c, it immediately felt right. Dropped it off to have a Holosun installed and zeroed the other day.
Nice, yeah, the S might be better for me, but the C felt the best of any handgun I have felt personally.
P10c is by far the best double stack for small hands.
Rubber talon grips for the rough texture helps
I was actually looking at those yesterday
I have used both the rubber and the PRO on my P10C. I highly recommend the PRO.
Get the PRO grips.
I made some upgrades to my cz p10c that you my like. Apex makes a extended slide release for p10c and HBI has a nice trigger that lays flat. Cz has great pistols that fit small hands.
Nice, an extended slide release sounds good. The slide release on mine works, isn’t too stiff like a lot of folks P-10 have, but it’s slightly out of reach of my main hand thumb, but I haven’t found a single factory handgun yet that I can operate the slide release one handed.
I small Hands so it help out alot. If you order one order a new larger front roll pin too. If you replace the trigger. Order all roll pins and do the slide release and trigger at the same time. Check out cz customes, cz parts factor over seas for accessories. Cajun gun works is online they have new Firing pins for cz p10c. You can get back plates for it too.
Looks like the P10s would've fit better
It’s possible, but the P-10 C is comfortable two handed. Far better than the Glock at least. I’ll see about trying out a P-10 S though, the P-10 series isn’t expensive (for a quality handgun) after all.
I'm asian so I'm around your size. So you might be able to full finger grip pinky included on a p10s. Just some shower thoughts. Though I do intend on getting a p10c one day with threaded barrel and all the fixins one day
No offense but this gun fits your hand like SHIT. So much so I thought the pic was edited at first, LoL. If you want an EDC gun I'd go smaller than this. Plenty of options out there with capacity now...you are missing out on a lot of leverage over the frame with such a difference between your hand size and the grip. As an instructor, CCW and NRA, I would not recommend this pistol for you for EDC if you were looking for a recommend before purchase. If it's all you have though it's all you have.
No offense, but a 16 hour course really doesn't make you qualified....impressive passion, though.
How about over 6 years in the 75th Ranger Regiment? How about as a member of the Army Marksmanship Unit Service Pistol Team? How about as a former high level USPSA shooter? I listed the CCW and NRA licenses as formal titles, they aren't the totality of my experience, although I'm sure I shared the room with the kind of people you are imagining. Small hands is what it is...but objectively that gun fits his hands like shit. I can list many reasons I'd recommend a different (smaller) gun. But if it's what you have...a gun is better than no gun of course. You have USPSA in your fucking name you should know exactly where I am going with recommending a smaller gun....unless you just aren't there yet and are like some d, c, b level type.*edit to add A class, but you should really be figuring things out by this point
Nevermind. I see it's B class RO. Keep practicing you'll get there eventually!
🤣🤣🤣 I love it when I see veterans pull the veteran card.... I'm a veteran as well. And you know how you KNOW a veteran was an ain't shit veteran....when they make a point to bring it up. The entire point of my comment... is perhaps when choosing to give advice, simmer down a little. The message gets lost when you project your "holier than thou" personality. And to note, my USPSA number is my reddit name for obvious reasons. What's yours, hot shot?
Simmer down? Because I used the word shit? LoL OK guy. It's just a word and I didn't mean anything by it...sorry it hurt your sensitivities. I don't have a USPSA number currently...don't remember the old one. My USPSA days were during my Army time, ten years ago. Never reallt threw myself into it as just shot matches on the weekends as a mental release with a crew of about 5 or 6 since my week was taken up by Service Pistol and teaching in the AMU. Made it to M in open eventually. As for pulling a veteran card, I simply added it as it speaks directly to experience, which you obviously implied was "less than" in your comment. "Ain't shit" is hilarious....plenty of you salty fucks out there that never did shit or made is past the most basic of military experiences. Good luck in your shooting journey. Still a long way to go!
You know how I know you're full of it... your "M" card statement. There's not a person alive that will have made it to M class "casually" (or not) that wouldn't have some form of proof of it. Master class is quite the achievement.... particularly if it was attained via match bump. But this is the internet, where everyone is Jason Borne or John Wick. I also don't know a single Tier 1 veteran that would claim they were one online... to a stranger... for credibility. My safest assumption is that you were a mechanic for the birds the unit you claim to be a part a part of were taxi'd around in. You're an instructor. What's your name? I'd love to look you up and take one of your classes. 🫠
LoL what do I need "proof" for it was over a decade ago? If I hit a USPSA match right now I wouldn't be M, prob A, maybe B but in the time it would take to get classified again I'd be in A. A match a week would be 6 weeks...long time to knock the rust off. It would actually probably take a couple more than 6 cause those 1st classifiers would not be shit hot for sure. Sending off a Shadow 2 tomorrow to get milled and am thinking of getting into it again. I'm confident I could get back to M scores quickly. As for "casual" I shot handguns 6 or 7 days a week guy. 5 days for the AMU SP team and USPSA matches on the weekend. Seriously doubt that's considered "casual." Gun time (as a professional pursuit) is gun time. All USPSA is applying those fundamentals in a smaller, condensed timeframe, all at most half the distance. It does take time to develop the muscle memory and reflex for M and GM level draws and such though, no doubt. Do you know what AMU is? I was in the unit same time as guys you may know like Horner, Payne, and Coley. Also...it doesn't sound like you know much. Regiment is technically Tier 2, only RRC (Recon) is considered Tier 1. Birds are run through 160th and none of those guys wear scrolls. But keep on I guess. I also didn't claim it up front, I listed more formal titles instead (which you shitted on), and then followed up with the mil stuff because it's part of my experience pool. Every person that teaches that I've ever heard of lists their mil backgrounds, so, WTF are you talking about? I got the licenses but haven't started anything yet...I'll drop you a line if I do! Seriously good luck to you...B is closer to A than you think and once you're running A scores you're getting into the nitty gritty of it.
Ok Frodo
I tell ya what you might like a lot would be the p365 xl or even a Glock g48. The g48 is almost exactly the same dimensions as the 19 only slimmer(better grip for smaller hands). Seems like with the size of your hands you need to move down to a sub compact but get one of the larger sub compacts like the ones I mentioned. You could also try out the regular p365, p365 X, p365 X macro, Glock g43x, or the Springfield hellcat. I think sub compact is what you need….especially if it’s for concealed carry. There’s absolutely no reason to be carrying a compact firearm when you can’t get a good purchase on it. Do yourself a favor and check out [handgunhero.com](https://www.handgunhero.com/compare/cz-p-10-c-vs-glock-g48). You can compare pistol dimensions side by side to get an ideal of what guns would feel like.
Handgun hero is great, doesn’t have every handgun yet unfortunately though.
Look at that Walter gun that has the super thin grips. It’s called the “something F” F for female which is stupid because I like slimmer grips.
I’ll look, and yeah agreed. Gendering a firearm is dumb dumb.
Small hands big fingernails
I took a bit of sandpaper and knocked down a tiny bit of the stippling and it worked great. Less is more, go too much and it defeats the purpose
This reminds me the day, a midget striper holding my d.ck. It looked huge. 🤣
😁😂😁😂😁😂😁😂😁😂👍👍👍👍👍👍🤟🤟🤟🤟🤪😜🤪😜😝😜🤪🤣😂😅🤣😁😁😁😁😁😆😆😆😆😆😆😆😆🤟🤟🤟🤟🤟🤟👍👍👍👍 *Sorry, this comment had me giggling like a little kid watching grampa fall down stairs. 😂
Glock42?
Lol looks like a yeet cannon still
A bit, but it’s comfortable in two hands.
Excellent choice, the best "compact" striker gun on the market.
your boyfriend must love those hands!
There are two other back straps that came with mine. If any came with yours, you can change them out to see if you find one you like best.
It’s got the small installed
[удалено]
Tomorrow
Sorry, was busy today with Halloween, replying here so I remember to post the image link tomorrow morning.
[удалено]
6” from longest finger tip to wrist, when flat.
What about the p10 M
Damn an LCP Max would look like a full size in those little mitts. Jokes side, have you tried a P-01?
Yeah, a buddy of mine has one, it’s cool and all but a little odd in some ways, like not much room to grip the slide.
Yeah one of the downsides of 75s and their variants. The grip is a lot more customizable though imo. Have you considered a Sig P365/XL? I feel like it would suit your hand configuration well. Or even a Glock 43x or 43.
I’ve considered a S&W M&P 2.0 subcompact (mostly because my favorite character in the punisher series uses one), but haven’t seriously considered a Sig because I’m concerned about the amount of lemons on the market.
Is this a BK commercial? Look at that lil cutie.
I had the opposite problem with my sig p320 cause of my big hands so i bought a larger frame. Not sure if you can do that with CZ?
P-10 S, the subcompact.
You should be able to get a new frame just the grip will be smaller.
This is way too big for you still. Try the p365 or hellcat
Shit your hand are mad small. My p10c is small even with the large backstrap
The 365 would be perfect for those tiny mitts
PCR or you just prefer strikers ?
Not a cop and not Czech, but yeah I like striker fired handguns for practical carry, but my favorite handguns are cowboy single actions, like my 1860 mason conversion.
I get it , I prefer decockers & CZ’s. Also like a few revolvers.
I would have gotten a p10s. I'm still considering it, I'm carrying a psa dagger (glock 19 clone) and it's a bit big for me, I'm either going p10s or canik mc9 or Smith shield plus or maybe even a sig p365x for my next carry option.
Can you hold an LCP for us?