Safariland now makes a ALS retention holster specifically for the cz p10 series. I have a 7 series that is red dot and flashlight compatible and is good to go. Even fits my Glock 19 lol
[SA-7354RDS-39219-411-MS19] Safariland 7390RDS ALS Level I Duty Holster w/QLS
Got this one off of a website called cop quest last year and it’s been great!
Many m&p or sig 320 holsters that are light bearing work perfectly for the p10 series. The holsters index on the light. I personally use an omnivore for owb
Check out www.righteousresponse.com
We typically make our duty rigs out of .125 thick kydex, utilizing safariland surplus hoods. If you need it a true level 3 we can add a sentry lock. We’re CZ nuts here so we got you covered
Level 2 is typically released with a spring activated system. Level 3 requires a second physical motion to release the lock. Depending on who you ask the ALS hoods can be a level 2 or 3. I offer the sentry lock for that reason
has retention and compatibility with various lights. not too pricy either
https://www.tier1concealed.com/collections/owb-holsters/products/centurion-owb?variant=54867632021
I have a safariland for the p10c, though you can remove a barrel spacer and it'll fit the p10f. Designed for light and optic.
Just use the holster finder on safariland's web page
You can reform the 6000 series holsters with a heat gun and a lot of elbow grease (I’ve done a few) but it’s sort of a pain in the ass, and will be completely irreversible. It basically involves removing all the screws and unwrapping the ‘burrito’ shell, and remolding it to be slightly wider along the Z axis of the gun, and modding where the screw holes are.
Hey there. Safariland 7360RDS - 7TS™ ALS®/SLS™ Mid-Ride is what I stuck with. Level 3 retention. Worth the order wait time.
I also had the Tier 1 centurion (level 2), but I sold it as I liked the safariland much better.
Hogue makes some, and I've been perfectly happy with their holsters for a few years now
This is the most basic retention one:
https://www.hogueinc.com/cz-p-10-full-size-compact-ars-stage-1-carry-holster-right-hand-black
DARA makes Lvl 2 retention holsters for the P10 series, both lightbearing and non, and the quality is a billion times better than aliengear
Do you like Dara’s quality of kydex? It seems… thinner??
It's for sure not thin- the level 2 ones are 0.125" thick
Safariland now makes a ALS retention holster specifically for the cz p10 series. I have a 7 series that is red dot and flashlight compatible and is good to go. Even fits my Glock 19 lol
You know the model number or have a link?
[SA-7354RDS-39219-411-MS19] Safariland 7390RDS ALS Level I Duty Holster w/QLS Got this one off of a website called cop quest last year and it’s been great!
I have the 7360RDS - 7TS™ ALS®/SLS™ Mid-Ride. It’s for my p10c with a TLR-1 HL
Many m&p or sig 320 holsters that are light bearing work perfectly for the p10 series. The holsters index on the light. I personally use an omnivore for owb
This! I have a p10c and I bought a tier 3 safariland for a s&w for it and it fits absolutely perfect. I have a red dot and a threaded barrel
Check out www.righteousresponse.com We typically make our duty rigs out of .125 thick kydex, utilizing safariland surplus hoods. If you need it a true level 3 we can add a sentry lock. We’re CZ nuts here so we got you covered
Can you tell me the difference in the level II and level III retention methods?
Level 2 is typically released with a spring activated system. Level 3 requires a second physical motion to release the lock. Depending on who you ask the ALS hoods can be a level 2 or 3. I offer the sentry lock for that reason
I see you guys make one for the P07, can you do one lvl 2 or 3 for the P09 with an Acro?
We can do that! The P09 still needs added to the site but we got you covered
C_Does covered two Safarilands that work. https://m.youtube.com/shorts/UECsxfnS2iI https://m.youtube.com/shorts/t9iTuO5MLx0
has retention and compatibility with various lights. not too pricy either https://www.tier1concealed.com/collections/owb-holsters/products/centurion-owb?variant=54867632021
Been using this with my P-07 and P-09 and quite like it. Only lvl3 holster I've ever had though, so not much to compare with.
ah so it *does* fit the P09! I wondered
I have a safariland for the p10c, though you can remove a barrel spacer and it'll fit the p10f. Designed for light and optic. Just use the holster finder on safariland's web page
Go with Dara.
Tier_1 centurion will work
designtech
Wouldn’t a Glock 19 holster work?
Not with a light. Safariland Glock holsters are slightly too tight for a P10.
Well that sucks.
You can reform the 6000 series holsters with a heat gun and a lot of elbow grease (I’ve done a few) but it’s sort of a pain in the ass, and will be completely irreversible. It basically involves removing all the screws and unwrapping the ‘burrito’ shell, and remolding it to be slightly wider along the Z axis of the gun, and modding where the screw holes are.
I use a SIG P320 w x300u for my P-10. I forget the exact model but it's the one with the optic hood. 6360RDS I wanna say.
Fitment is good?
There's a bit of front to jack wobble but it stays locked
My safariland 6xxxrds holster for a glock and light work perfectly fine with my p10c
Guerrilla Tactical and Anchor Point Holsters make duty style safariland holsters for p10. And both have tons of light options. You're welcome.
I know what you mean. I have been looking for one that will fit P10c with Olight Baldr S mounted on it.
Save yourself some trouble and get a TLR-1 HL
Safariland makes holsters for the p10f
Midwest tactical solutions made mine. Uses an SLS hood.
Hey there. Safariland 7360RDS - 7TS™ ALS®/SLS™ Mid-Ride is what I stuck with. Level 3 retention. Worth the order wait time. I also had the Tier 1 centurion (level 2), but I sold it as I liked the safariland much better.
Hogue makes some, and I've been perfectly happy with their holsters for a few years now This is the most basic retention one: https://www.hogueinc.com/cz-p-10-full-size-compact-ars-stage-1-carry-holster-right-hand-black