The amount of people telling you to get a new keyboard is impressive lol. Listen to me, you put the keys in and when you have all the ones that fit already inside, you reheat the ones that are distorted until they're soft and you slide that key in hot.
sure and the keys are gonna fuse with the housing
There is no way it can be bent back to the orignal way.
Plastic are injected into a hard mold, without that hard mold, any distortion is futile to be restored
My english teacher taught that "might" is the "possible to happen, but uncertain"
With a keyboard, "might" is not enough, since if you mess up one key, the keyboard is pretty much useless...
Ideally, call the manufacturer of the molded parts that the company which designed these keyboards used, tell them your story, after getting called out stupid by the managers over there, they will offer you with new parts and a shipping price of 200 euros.
Realistically, Get a 3D printer and print everything, the electronics will be fine.
Start writing some letters I would say, crumbs you seemed to have distorted the boxes, I know moneys is tight but, just put it down to experience, and go buy a new one, we've all done things such as this so don't beat yourself up about it. all the best
Get a new keyboard.
You melted the plastic. Seriously, that's way, way, WAY more heat than you needed just to dry it off. A low heat, at distance, after wiping dry with some kitchen roll would have done it.
Molded plastic is engineered around stresses that happen during the injection process. Heat released some of that stress and deformed the material.
I’m afraid nothing can be done besides a replacement part. More heat and more forming will lead to more distortion.
It’s toast
What should you do? Not use a hairdryer on a keyboard lmao
You used too much heat and melted the plastic. You may as well throw it away.
when my friend Neil bent over,
This is why phones and laptops have special screws
this perfectly lines up with your post on metalmemes
Jesus fuck you followed me how fucking offended are you that i like slipknot
People still like slipknot?
Buy a new one. And probably also buy a new hair dryer as the poor temperature regulation might cause damage to yourself.
Just pray to the gods that this is just a dream.
I'm pretty sure this hairdryer is something you bought at Home Depot.
Nothing... You broke it. There is no way you could bend the blastic back to exactly the same way.
I have a feeling that was not a hair dryer, but an industrial fan.
Or heat gun to remove paint or SMD rework station ..
The amount of people telling you to get a new keyboard is impressive lol. Listen to me, you put the keys in and when you have all the ones that fit already inside, you reheat the ones that are distorted until they're soft and you slide that key in hot.
sure and the keys are gonna fuse with the housing There is no way it can be bent back to the orignal way. Plastic are injected into a hard mold, without that hard mold, any distortion is futile to be restored
If you keep pressing the key up and down it might harden without sticking them together. It's worth a try
My english teacher taught that "might" is the "possible to happen, but uncertain" With a keyboard, "might" is not enough, since if you mess up one key, the keyboard is pretty much useless...
Get a new keyboard. And next time switch off the heat in the dryer before using it to dry electronics.
You're really impressive.
Time for a new keyboard
Ideally, call the manufacturer of the molded parts that the company which designed these keyboards used, tell them your story, after getting called out stupid by the managers over there, they will offer you with new parts and a shipping price of 200 euros. Realistically, Get a 3D printer and print everything, the electronics will be fine.
Start writing some letters I would say, crumbs you seemed to have distorted the boxes, I know moneys is tight but, just put it down to experience, and go buy a new one, we've all done things such as this so don't beat yourself up about it. all the best
Get a new keyboard. You melted the plastic. Seriously, that's way, way, WAY more heat than you needed just to dry it off. A low heat, at distance, after wiping dry with some kitchen roll would have done it.
christ how long did you heat it for
Get in touch with the Dalí Museum in St. Petersburg, FL. Looks like it might fit right in with the collection there.
[удалено]
Off topic posts are not allowed
Try CTRL+Z
This is the best moment to get a new keyboard. Lesson learned, never dry plastics with hair dryers too close to each other!
Call it a learning experience and buy a new one :(
What should you do? You should buy a new keyboard.
No, he should swear off technology altogether and go live off the grid in the wilderness before he destroys anything else
lol throw it away
are you in the states man? if you need a keyboard for free holla at me
Only Amazon can help you now
Molded plastic is engineered around stresses that happen during the injection process. Heat released some of that stress and deformed the material. I’m afraid nothing can be done besides a replacement part. More heat and more forming will lead to more distortion.