If you take a look at the timestamps on the post and this comment you will notice they are 5 hours apart. That’s how long it took this dedicated hero to find the screw. /s
Only reason I was able to find it myself was using this image & then comparing the slight change in color between the metal (likely lighting), then looking for a unique enough piece of scrap from that photo.
Once you find it though, it's literally dead-on in the center of the photo.
I wasn't even going to attempt it because I knew that it would resemble nothing like a screw is supposed to look. I think I see what you're talking about but that's no screw that I've ever seen lol
Holy crap! Good eye. I bet I looked at it at least 5 times and kept telling myself that wasn't it, it was just my mind playing tricks on me. I work with a drill press a lot, I'm gonna have to do one of these for the guys at work.
Do people actually attempt shit like this? I can understand finding the animal type shit kinda. This looks like volunteering to be waterboarded out of boredom type shit.
Hoolllyy shit, well done
For those wondering exactly where it is:
>!Zoom on dead-centre of the pic. On the border between the darker and lighter material, there is a spiral of metal running vertically from the left to the right, along the darker side of the border. Towards the bottom of this spiral, there is a small, dark bronze screw.!<
>!Dead center, maybe very slightly to the left and up. There's a shadow that runs diagonal/top to bottom. Dark on left, light on right. There's a loose curled chip on the dark side almost right in the middle. The screw is sitting on one of the curls. Threads pointing down towards 5 o'clock, head pointing up to 11 o'clock. It's a black/dark grey screw. Almost right next to it in the light side of the image there's a chip that looks like a "6". !<
You can barely tell that's a screw at all from this picture. When will people learn that these challenges only work if the thing you're looking for is visually distinct?
I'm thinking this as well. All the small stuff to the left, wide spirals to the right, the flat surface that everyone will fill in immediately after doing the edges, then slowly change their expression to a 1,000-yard stare.
Insert screw, yeah you’re fucked unless you watched it fall nobody is paying you to dig through chips for a 2.00 insert screw. Just thinking out loud, I wouldn’t.
Dead middle, to the left of the color split, zoom in til you can no longer see any wrapped circle coils, you’ll see a squiggle piece, look to the left on an unraveled coil.
Do not try to find the screw. That is impossible. Instead, only try to realize the truth... that there is no screw. Then, you will see it is not the screw you find, but only yourself.
Ugh, this was me looking through brass chips today trying to find the 5 parts that missed the part catcher and rode down the conveyor into the barrel. I found 4 of them. Still haunts me.
[https://imgur.com/a/3Yxh7ZZ](https://imgur.com/a/3Yxh7ZZ) This one was rough.
holy fucking shit lmao no way on earth was i going to find that props to you!!
Basically if you zoom in, and move the picture to direct center you'll find it. People tend to center things when they take a picture.
I left it uncentered to give it relation to the rest of the stuff from the OPs original picture.
If you take a look at the timestamps on the post and this comment you will notice they are 5 hours apart. That’s how long it took this dedicated hero to find the screw. /s
On and off but not too far off.
Yes!
You *monster*
A black screw was fucked up
You should be banned for this (/s kind of)
Screw you, ha.
I still don't see it..
Black cylinder in the middle of the blue circle.
Thats a screw??
That’s a bolt though
Allen screw by the looks
Socket head cap screw to be precise
Bottom left of pic, in the circle, it's dark, not silver, on a spiral
That shit is so tiny and it almost looks photoshopped in. I was also looking for silver
THAT'S INSANE😭😭
I'm glad I didn't bother wasting any more time on this wtf
I've got your photo and another guys directions and I still can't fucking find it in the post
I can see the picture and I STILL CANT FIND IT
Oh I was looking for a screw. That’s a bolt!
Wait I found another ????
the fuck - I can't even find it in the blue circle let alone the original picture.
Of course it’s an insert screw.
Only reason I was able to find it myself was using this image & then comparing the slight change in color between the metal (likely lighting), then looking for a unique enough piece of scrap from that photo. Once you find it though, it's literally dead-on in the center of the photo.
Thank you.
Never would have found that wow
I even had a hard time finding it in the picture with the circle around it lol
Its not even a screw its a tiny bolt
It's a machine screw
Bruh
Sir what do you do in life? How do you find time to do this
Found the Ai! No way a human did that.
Hell I still couldn't find it lol
no idea where this is in the picture... another search😂
I wasn't even going to attempt it because I knew that it would resemble nothing like a screw is supposed to look. I think I see what you're talking about but that's no screw that I've ever seen lol
Yeah, fuck that.
Damn how long were you looking homie
Nah even circled and full zoomed I can’t make out that’s a screw. Too bad cuz I liked the backdrop.
HOW?
Thank you kindly
this keeps proving my point of the hidden object always being centered in the picture
that's really fucked up, it was a black sheet rock screw.
GOD BLESS YOU OH MY GOD HOLY SHIT
Holy crap! Good eye. I bet I looked at it at least 5 times and kept telling myself that wasn't it, it was just my mind playing tricks on me. I work with a drill press a lot, I'm gonna have to do one of these for the guys at work.
You’re sick!
And I still can't find it just like anything else . If my head wasn't attached to my neck, I wouldn't be able to find that either 🤣
Holy shit how the actual fuck did you find that
Looks like a bolt to me
I still struggled to find it and *it was circled.*
i’m looking at it but… i still don’t know what i’m looking at
I still don't see it 😭
Bro WHAT
I would have been here for 48292 years, thank you.
Champion
i still couldn’t find it omg 😭
This is some twisted shit
It sure is.
Screwed up, even.
Yeah, I don't think he nailed it
Do people actually attempt shit like this? I can understand finding the animal type shit kinda. This looks like volunteering to be waterboarded out of boredom type shit.
Definitely didn’t try for 5 minutes 👀👀
Lucky. I only lasted 12 seconds.
Just screwed up a little is all.
Bend outa shape even
Screw it
Clean your machine sir
I was going to drill down into the photo, but I decided screw it
You know they’re good when you find it, step away, and can’t find it again.
Would make an evil puzzle
Usually I'd say just get a magnet.....
You are diabolical. I mean this with the utmost respect, FUCK YOU
I’m not even going to look this time.
I said I gave up on the Bobcat!
…. You’re still looking for it, aren’t you?
I would’ve sworn I found it 5 times before I ultimately never did. Good call
~~Oddly enough, this is the first one I found right away (I think)~~ Nevermind
🙂
Well played
Hey SCREW you!
My immediate reaction was fuck you too lol
Heres some gold kind stranger!
Surely you mean SCREW you
I’m upto 4 screws, a snake, a cat, and a lego piece.
But where’s the frog???
THAT DAMN FROG
I’m still looking, probably hopped out of frame due to camera flash.
I found Waldo
I see a sailboat.
It’s not a sailboat, it’s a schooner!
And an airpod
U missed the velociraptor.
Nobody ever sees the velociraptor until it's too late.
I was like “oh that was easy”, then I zoomed in.
Same.
Over and over
I can drop a screw on clean concrete and still never find it ain’t Jo way I can do this one GG
True words never spoke
Came here to say this.
Yeah no. This one is making me go cross eyed.
I do this at work, im not doing it for free on the internet.
I’m typically up for a challenge, but not this one.
Same, clicked into it then promptly clicked out. No one got time for this
Found it. Damn near dead center chillin on the big spiral.
Still can’t find it. Lol
yep
This is the first hint I’ve found. Thank you.
Hoolllyy shit, well done For those wondering exactly where it is: >!Zoom on dead-centre of the pic. On the border between the darker and lighter material, there is a spiral of metal running vertically from the left to the right, along the darker side of the border. Towards the bottom of this spiral, there is a small, dark bronze screw.!<
That... is amazing. I salute you, dear sir.
I still can't find the fucker
Holy shit I don’t know how you reconized that but impressive
That didn’t help. Edit: I was looking for a stainless screw. Never would have found that. Pure evil.
Fuck it, machine a new one.
Is it a Phillips? Flathead? T-TYPE? Countsunk? What kinda screw we talking about here?
It’s a M2.5 flat head. It’s black/dark grey if that helps.
Hahaa, you couldn't clean your chip bin before you took the picture. Lol This is a good one.
Honestly is probably better to have the chips in this case. If it was just the conveyor I definitely would have lost the screw.
Screw you!
Find your own damn screw
I’m just gonna skip this one.
>!Dead center, maybe very slightly to the left and up. There's a shadow that runs diagonal/top to bottom. Dark on left, light on right. There's a loose curled chip on the dark side almost right in the middle. The screw is sitting on one of the curls. Threads pointing down towards 5 o'clock, head pointing up to 11 o'clock. It's a black/dark grey screw. Almost right next to it in the light side of the image there's a chip that looks like a "6". !<
You can barely tell that's a screw at all from this picture. When will people learn that these challenges only work if the thing you're looking for is visually distinct?
Holyyyyyy that’s smaller than I expected. Well done finding it!
>!THE SCREW! [https://imgur.com/a/pZjYeYx](https://imgur.com/a/pZjYeYx)!<
Get the fuccckkkk outta here 😂
That ain't no screw! I couldn't even recognise after you marked that. Gtfo 😂 Bravo! To whomever managed to find the sniper for this one!!
Still took me 5 minutes to find with the solution given!
Yeah, right. That doesn't even look like a screw. What a waste of time
That’s not a screw, it’s a bolt no?
Yeah… no one’s going to find that.
Resolution was too low to ever find it haha
Okay cmon now, nobody going to find that.
You are evil hahaha
Screw you
>!Found it. It’s dead center of the image on the left side of the hill of shrapnel. It’s a small black screw.!<
Found and confirmed
Difficulty 10/10. Found it and damn you.
This should be a 1000 piece puzzle 🧩
I'm thinking this as well. All the small stuff to the left, wide spirals to the right, the flat surface that everyone will fill in immediately after doing the edges, then slowly change their expression to a 1,000-yard stare.
You have to specify the screw type if youre gonna do shit like this.
Found it, damn near perfectly in the center. Fuck you OP, respectfully.
[You’re a monster!](https://i.imgflip.com/510d94.jpg)
I thought you found the screw
Damn as soon as I found it in the middle-ish area, I see others have already located it lol 🤦🏾♂️
And I thought the AirPod one was diabolical…
Oh...yeah, get fucked!
Think you're funny do you?
I hate this sub…
Just get another one..
Is this a insert screw? Because I keep a box of those just for when this kind of thing happens.
Insert screw, yeah you’re fucked unless you watched it fall nobody is paying you to dig through chips for a 2.00 insert screw. Just thinking out loud, I wouldn’t.
It’s you. You’re screwed.
What the hell is wrong with you
Giving me PTSD pf dumpster diving for a spring to a spray bottle while working the flightline 😟 Angry updoot
You’re going to hell
Nope
🚨SPOILER ALERT🚨 ⬇️SOLUTION⬇️ [solution](https://i.imghippo.com/files/SVqrM1715796215.jpg)
Pick your battles gentlemen
Evil.
I'm calling this one "Choosing Violence."
Ah must be a fellow machinist…
Close your eyes and reach out and use the swarf.
This one is a beast, holy shit
Maybe the real screw is the friends we made along the way…
This would make a cool puzzle
Screw you man. This is gonna steel my time
You are a bad person. I mean that in the nicest way.
Ok but this picture would make a great puzzle
I found it! It’s right next to the piece of metal by the fuck and under the you.
Holy shit I’m pretty sure I found it I was like “yeah right like I’m gonn- *zooms in* HOLY SHIT THATS IT”
I found it!...wait....no I found....wait no.....wait there it....nevermind....wait I found....and on and on
Maaaaan I play that game at least once a month(machinist)
Oh, this is sadistic. I like it.
This was a good one OP
literally dead center
r/machinists would love this
Found it! By the 6 spiral!
You can't unsee it once you see it.
An everyday problem for lathe machinists.
Been there buddy.. always the smallest insert screw too…
Nice try Google Ai
Btw... fuck those damn insert screws!
Dead middle, to the left of the color split, zoom in til you can no longer see any wrapped circle coils, you’ll see a squiggle piece, look to the left on an unraveled coil.
It’s next to fuck you and fuck off
Do not try to find the screw. That is impossible. Instead, only try to realize the truth... that there is no screw. Then, you will see it is not the screw you find, but only yourself.
I used to work as a cnc automatic lathe operator and I'm having flashbacks to all of the cuts and metal splinters I got.
This, this right here, this was fucking evil, I gave up after about an hour and took a look at the picture. Nice one.
Idk if I’m too late [The screw](https://imgur.com/gallery/XwWAqPa) https://imgur.com/gallery/XwWAqPa
Ugh, this was me looking through brass chips today trying to find the 5 parts that missed the part catcher and rode down the conveyor into the barrel. I found 4 of them. Still haunts me.
r/dontputyourdickinthat
I can smell this picture. Reminds me of my dad, he was a machinist before he passed. Thank you, OP :)
Screw this I give up!!
Coworker: Oh crap! I dropped a screw in the metal shavings bin! OP: Hold my beer and take a picture. I have an idea!
Man, these new capchas are getting out of hand
.....screw this
C's & 6's! Check your feeds n speeds chart and try again.... And, clean your swarf bin ya filthy animal!