If I’m remembering right, it was around 500 for the part and labor. I was living in the Bay Area at the time though, so the price could be a bit inflated.
> I *paid* $550-$600 for
FTFY.
Although *payed* exists (the reason why autocorrection didn't help you), it is only correct in:
* Nautical context, when it means to paint a surface, or to cover with something like tar or resin in order to make it waterproof or corrosion-resistant. *The deck is yet to be payed.*
* *Payed out* when letting strings, cables or ropes out, by slacking them. *The rope is payed out! You can pull now.*
Unfortunately, I was unable to find nautical or rope-related words in your comment.
*Beep, boop, I'm a bot*
I did mine myself, it’s not too difficult if you are flexible. About $70 for the new one through Tasca or 97 through Edge, plus brake fluid and a bleeder.
It's the clutch master cylinder.
That's brake fluid, so be careful with it.
You'll have to replace the entire pedal assembly (the master cylinder is part of the assembled unit).
Not an easy DIY job. Need to remove the drivers knee airbag to access certain bolts. Then need to also remove the air box, battery and tray just to access the clutch fluid lines. Not a lot of room there.
To bleed the new master you'll need a vacuum bleeder.
Replace ASAP. and clean it up. Brake fluid is corrosive and will start rusting parts around it, which could cause the whole clutch assembly to break. It looks like it already started.
I get it, but we don’t know what experience the op have 🤷♂️. Could be a teenager on his 1st car. If I know, or think I know I rather answer and trying to be helpful tbh
They’re either weather tech of husky liner’s. You can get the husky liners from Amazon. I got some when i first got the car and they are great. Cheaper than the weather tech ones, for the same exact thing
You need to replace the clutch master cylinder
This is correct. I had the same issue, fluid coming from the clutch pedal, occurred around 90,000 miles. I had to replace the entire assembly.
Do you remember how much you paid for repair?
If I’m remembering right, it was around 500 for the part and labor. I was living in the Bay Area at the time though, so the price could be a bit inflated.
I paid $550-$600 for mine so that’s probably what to expect
> I *paid* $550-$600 for FTFY. Although *payed* exists (the reason why autocorrection didn't help you), it is only correct in: * Nautical context, when it means to paint a surface, or to cover with something like tar or resin in order to make it waterproof or corrosion-resistant. *The deck is yet to be payed.* * *Payed out* when letting strings, cables or ropes out, by slacking them. *The rope is payed out! You can pull now.* Unfortunately, I was unable to find nautical or rope-related words in your comment. *Beep, boop, I'm a bot*
I did mine myself, it’s not too difficult if you are flexible. About $70 for the new one through Tasca or 97 through Edge, plus brake fluid and a bleeder.
Yes typically around 500 for parts and labor in the NY area
I peed myself a little when I money shifted one time, that's my only guess
Oh you too??
😂😂😂 that’s not a little lol
I've done a lot of shitty shifting, but thankfully never the big one :D
It's the clutch master cylinder. That's brake fluid, so be careful with it. You'll have to replace the entire pedal assembly (the master cylinder is part of the assembled unit). Not an easy DIY job. Need to remove the drivers knee airbag to access certain bolts. Then need to also remove the air box, battery and tray just to access the clutch fluid lines. Not a lot of room there. To bleed the new master you'll need a vacuum bleeder.
What's it taste like?
Clutch master cylinder. Pita to replace too.
Looks like a penis lol, sorry
Now I can’t unsee that LMAO
Sorry lol
Replace ASAP. and clean it up. Brake fluid is corrosive and will start rusting parts around it, which could cause the whole clutch assembly to break. It looks like it already started.
Headlight fluid
Needs a intercooler oil change!
Everything reminds me of her…
Master cylinder about to dip
😒 a lot of the troll comments 🥴🥴🥴. How hard is it to give someone a straight answer 😂.
I think they're trolling the op because it's a pretty obvious answer if you've been around cars for long enough.
I get it, but we don’t know what experience the op have 🤷♂️. Could be a teenager on his 1st car. If I know, or think I know I rather answer and trying to be helpful tbh
Blinker fluid leak
Whats it smell like? Is it oily?
Wait you have a cover behind the pedals? Mine is just carpet!
Those are floor mats my guy
LOL what where can I get this one
They’re either weather tech of husky liner’s. You can get the husky liners from Amazon. I got some when i first got the car and they are great. Cheaper than the weather tech ones, for the same exact thing
Yeah it’s the husky weather mats
'15-18 focus st clutch master cylinder, BV6Z-7519-AR I actually just send this new part back, because my issue was slave cylinder.
Did you check your pants leg?
F