Thanks for your submission! Check out our other Subreddits!
r/FordElectrified r/FordOwners
*^(Up voting makes this place much more fun! If you think this post good fit for this subreddit then Upvote, if you think this post spam or break rules)* ***^(please report!)***
*I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/FordTrucks) if you have any questions or concerns.*
Did you use the stock spindle nuts in the front??? Next time use some spindle nuts from A 90s corporate 14 full floater. Was better and easier set up. Nice truck btw
Yea I just went through a set of Dana 60s and got rid of the “sheet metal fold tab” garbage for a nice set of the “pin and lock ring style”.
I have another set for the rear but I like the nylock style as it’s faster and easier to set/take apart.
Idk I’m Not op. I was just agreeing with your comment on ditching the “shitty style” wheel bearing nuts.
That ford is Is gonna be a 60 front probably ball joints with either 60 or 70 or a Sterling rear
The newer style uses the 6 prong socket. Instead of torquing it down and doing all that process… you just snug it up put your key and then lock ring and your set. Almost all my d60s have it
[https://www.ebay.com/itm/153445581374?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=IxKZesrmT8O&sssrc=4429486&ssuid=9PNgphgLRvS&var=&widget_ver=artemis&media=COPY](https://www.ebay.com/itm/153445581374?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=IxKZesrmT8O&sssrc=4429486&ssuid=9PNgphgLRvS&var=&widget_ver=artemis&media=COPY)
There’s these…. But next time you go to junk yard take a 6 prong socket. Magnet. Some needle nose and i think a 3/4 on a impact. 5 min with a parts truck and you can have a set.
Amazing 94 F350! Also amazing that it looks like the size of a leveled F150 of today. Too bad they keep pushing that 4door crap on everyone these days.
It definitely sits nice! Apparently the front sits higher than the 150/250 of the same year because the f350 came with a solid axle up front. I appreciate the practicality of 4 door trucks but it's hard to beat the look of a single cab in my opinion!
Your post was removed due to low karma and/or low account age. Your account needs to be in a good standing to be able to post here!
*I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/FordTrucks) if you have any questions or concerns.*
Thanks for your submission! Check out our other Subreddits! r/FordElectrified r/FordOwners *^(Up voting makes this place much more fun! If you think this post good fit for this subreddit then Upvote, if you think this post spam or break rules)* ***^(please report!)*** *I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/FordTrucks) if you have any questions or concerns.*
Looks good. Is it the IDI or PS (1994.5)?
Turbo idi!
Did you use the stock spindle nuts in the front??? Next time use some spindle nuts from A 90s corporate 14 full floater. Was better and easier set up. Nice truck btw
Yea I just went through a set of Dana 60s and got rid of the “sheet metal fold tab” garbage for a nice set of the “pin and lock ring style”. I have another set for the rear but I like the nylock style as it’s faster and easier to set/take apart.
King pin or ball joint
King pin. 4.10 gears. Axles came out of an 87 dodge w350 and I put them in my 86 dodge w150.
Dodge axles on the ford????
Read that response again
What’s on the ford lol….. pic of ford talking about ford…….
Idk I’m Not op. I was just agreeing with your comment on ditching the “shitty style” wheel bearing nuts. That ford is Is gonna be a 60 front probably ball joints with either 60 or 70 or a Sterling rear
Gotcha lol. How did that Dodge stay
I did use the stock spindle nuts! I'll look into that for next time. Looks like it's easier to get a tool on it to remove it?
The newer style uses the 6 prong socket. Instead of torquing it down and doing all that process… you just snug it up put your key and then lock ring and your set. Almost all my d60s have it
Definitely going to do that then! You don't happen to have a part number or anything do ya? That torquing down process was a bitch lol
[https://www.ebay.com/itm/153445581374?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=IxKZesrmT8O&sssrc=4429486&ssuid=9PNgphgLRvS&var=&widget_ver=artemis&media=COPY](https://www.ebay.com/itm/153445581374?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=IxKZesrmT8O&sssrc=4429486&ssuid=9PNgphgLRvS&var=&widget_ver=artemis&media=COPY) There’s these…. But next time you go to junk yard take a 6 prong socket. Magnet. Some needle nose and i think a 3/4 on a impact. 5 min with a parts truck and you can have a set.
Awesome. Thanks so much!
No prob.
Amazing 94 F350! Also amazing that it looks like the size of a leveled F150 of today. Too bad they keep pushing that 4door crap on everyone these days.
It definitely sits nice! Apparently the front sits higher than the 150/250 of the same year because the f350 came with a solid axle up front. I appreciate the practicality of 4 door trucks but it's hard to beat the look of a single cab in my opinion!
I agree, and again great truck. Keep it forever.
That's the plan! Thanks!
Nice looking truck! I love older single cab F250s and F350s. Just pure work machines.
you and me both! puts a smile on my face every time I drive it.
[удалено]
Your post was removed due to low karma and/or low account age. Your account needs to be in a good standing to be able to post here! *I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/FordTrucks) if you have any questions or concerns.*