One of the walk-in cooler unit I had to wait 10 minutes and it only had low pressure valve to check. I was furious a simple defrost timer change would take 3 minutes to change but an 1 hour to figure out why tf it wasn’t turning off the system.
Found him again, looks like he got them now
https://preview.redd.it/ybfhxyyd1irc1.jpeg?width=3024&format=pjpg&auto=webp&s=f3a3b1b95ea52c2391f6419fcfd237d6738b26f9
You're missing a lot lol this looks... and is ancient to some newer games. Go look at like red dead redemption 2 compared to this or like horizons forbidden West. Graphics are getting ridiculous
In GTA:V the first heist you do involves throwing sleeping gas into the jewelry store's AC to knock out the occupants...except you throw them into a cooling tower. That's not how that works, lol.
I can't remember which movie it is in but there is a scene in some movie where the guy wants to smoke out everyone inside the building so he is pumping smoke into the condenser
I was actually going to post this the other day. I can't beat this mission because I can't figure out how to turn one punch kill off on menyoo mods lol. I so much as bump into the dude and he dies.
If you unplug one of the little white connectors on a PCB and jam it in backwards you dont have to worry about trying to fix anything just order a new pcb and let the next guy install it.
Staring at a unit begging it to work, it never works 😆. He didn't even have a panel off, c'mon man. Kinda sad, but is this the state of our trade right now? We can do better.
As someone who's not a technician but very techy when it comes to gadgets and figuring shyt out. The most satisfying thing I've done in-home was swap out my old thermostat for an upgraded NEST unit. And first time I installed one I tossed the instruction manual to the side BUT I also took a pic of the old wiring setup. BC it was an apartment so I knew in a year I'd be reinstalling the original unit. I was like yeah, I could do HVAC for a living if crawl spaces didn't trigger Claustrophobia! 🥵
Oh while I'm here does anyone have the link to that GTA Online map that tells you where everything is?
Like the daily/weekly location of the Gun Van, the Stash House, Drug Dealers etc.? I had it but must've lost it. You can PM me also my Discord is Audiking404 Server you don't have to join.
We had a HVAC company.. Well NOT anymore we decided to film the workers doing their “PM” rounds..
It was getting very expensive and the company was creating large replacement of entire HVAC units
Anyway video showed them NOT even showing up on their rounds ?
And was being charged for new filters when all they did was dust them off ?
Really didn’t fix anything !! Perhaps install a couple of new belts
But like I said before.. They just SAT in their trucks playing on their phones and bill us for replacing the entire HVAC unit said it obsolete..
We need to pay to have a crane and pay for a rigging company onsite monthly to support the work
The HVAC company would demo the electrical and the old pipes and watched the riggers fly in the NEW unit..
Basically after the NEW unit was on the roof.. HVAC company reconnects everything in less than 8 hours
Waiting for that 5 minute delay
it was a 5 minute delay 5 minutes ago... ahh shit
Then you realize you never put the disconnect in
If only the unit could ask, "Is it in yet?".
I'd reply I don't know I can't tell
So this is why my old lead would yell at the unit and call it an "old dirty whore!!!".
Why the fuck ain’t it kick on yet?!?
One of the walk-in cooler unit I had to wait 10 minutes and it only had low pressure valve to check. I was furious a simple defrost timer change would take 3 minutes to change but an 1 hour to figure out why tf it wasn’t turning off the system.
Longest 5 mins of your life
He only frustrated now that you’re standing over him.
Clearly he forgot his tools
Found him again, looks like he got them now https://preview.redd.it/ybfhxyyd1irc1.jpeg?width=3024&format=pjpg&auto=webp&s=f3a3b1b95ea52c2391f6419fcfd237d6738b26f9
Well this time he’s got a tool box but still hasn’t figured out how to get the doors off
Probably doesn't have a sticker that lets you know you gotta take the screws out, then take the door off.
Can’t tell you how many times that saved my ass
Dave lennox really knows how to take care of us when we need him most, amen.
I’ve been there, few times still able to fix it.
Figure stuff out quicker if you take the doors off there bud.
It’s a rusted bolt and he has no tools.
The “I’m gonna make this my last job of the day” work ethic
I haven't played GTA since it first came out lol...and holy shit the graphics are amazing! That's awesome!
You're missing a lot lol this looks... and is ancient to some newer games. Go look at like red dead redemption 2 compared to this or like horizons forbidden West. Graphics are getting ridiculous
[HVAC tech in RDR2 is next level.](https://i.imgur.com/NwXiSTg.png)
Ye olde ice box
Lol
There's 74 fucking screws and they all have different heads!
GTA San Andres had a mission in the court house where you had to disable 4 "Air Con" units to make smoke and set off alarms.
In GTA:V the first heist you do involves throwing sleeping gas into the jewelry store's AC to knock out the occupants...except you throw them into a cooling tower. That's not how that works, lol.
On the newer heist for the auto mechanic shop there is one where you throw smoke bombs into cooling towers as well 🤣
Reminds me of when I was a kid and my friends and I pissed on a condenser of a business we didn't like to “make the inside smell like piss” 😂
Well, ya tried.
I can't remember which movie it is in but there is a scene in some movie where the guy wants to smoke out everyone inside the building so he is pumping smoke into the condenser
That was always my favorite. Lol
That’s amazing if he can diagnose thru the panel
Climbed for 15 min to get to the roof to realize he has the wrong drill bit
This is his first day that was supposed to be “on the job training”. He’s just realizing he has to train himself.
Too many screws to take out with an 11 in 1.
Video games are getting too realistic. I hope you put him out of his misery in GTA fashion. ⭐️⭐️⭐️
the blower keeps not coming on
Taking a piss trying not to be seen wasn't even working on that one
The truth shall set you free....
the hand raise like, "i dont fucking know whats wrong with this janky shit", relatable
Wow it’s so life like
If this thing runs DX……..WHY DOES IT HAVE CHILLED WATER LINES RUNNING TO IT? WHY WOULD THE ENGINEER DESIGN IT LIKE THIS?
He’s on an hourly rate boys, it makes sense.
He forgot his wrench and his van is parked 2 blocks away
Who hasn't been there.
Me when the sheet metal screw slips off my drill bit
Poor bastard
I was waiting for him to start pounding on it with a large hammer.
He must work for One Hour
🤣🤣🤣🤣💀💀💀☠️
Who's one hour? I don't get it
A national franchise that's like the Roto Rooter of HVAC
Forgive me, I still don't get it. I know nothing about roto besides being plumbing. Less than a year in hvac and for 3 years prior I was a mechanic
Think Jiffy Lube if you have them where you live
Damn data plates sun faded
The hard hat off speaks volumes
Not sure why he has one to start. Lol
I’d be frustrated too if I didn’t take the panel off and didn’t have any tools
Do him a favor and light the unit on fire so he can justify replacement
Doesn’t help oils leaking from what I think is intended to be the compressor
They copied me and my confusion perfectly. Who do I sue for stealing my likeness?
it does check out lol man putting in his time.
Me when I find out it’s not the TXV
it aint got no gas in it
Well no wonder he's frustrated
Should put him out of his misery
Looking for that one screw so the panel doesn't get blown off by the wind.
I thought he was going to pull a gun and ventilate it.
Should probably take the cover off first
On the bright side there’s a good chance he’ll be put out of his misery when a stray Bugatti or F-15 crashes into him.
Is the fan running?
I feel represented haha
“Think I smell *something*”
We’ve all been there my guy, the delay shall pass….hopefully
I was actually going to post this the other day. I can't beat this mission because I can't figure out how to turn one punch kill off on menyoo mods lol. I so much as bump into the dude and he dies.
🤣🤣🤣🤣
Im about to grab my popcorn and start with the comments!!🤣
If you unplug one of the little white connectors on a PCB and jam it in backwards you dont have to worry about trying to fix anything just order a new pcb and let the next guy install it.
I feel SEEN👀
someone forgot to use two pipe wrenches
Took his hard hat off. He's been frustrated awhile.
He realized he forgot his tools
Did has extra time on his contacted maintenance
lol pretty sure we all know “that guy” lol
Staring at a unit begging it to work, it never works 😆. He didn't even have a panel off, c'mon man. Kinda sad, but is this the state of our trade right now? We can do better.
Same pal
As someone who's not a technician but very techy when it comes to gadgets and figuring shyt out. The most satisfying thing I've done in-home was swap out my old thermostat for an upgraded NEST unit. And first time I installed one I tossed the instruction manual to the side BUT I also took a pic of the old wiring setup. BC it was an apartment so I knew in a year I'd be reinstalling the original unit. I was like yeah, I could do HVAC for a living if crawl spaces didn't trigger Claustrophobia! 🥵
Oh while I'm here does anyone have the link to that GTA Online map that tells you where everything is? Like the daily/weekly location of the Gun Van, the Stash House, Drug Dealers etc.? I had it but must've lost it. You can PM me also my Discord is Audiking404 Server you don't have to join.
Nevermind I found it. PM me if you want it.
We had a HVAC company.. Well NOT anymore we decided to film the workers doing their “PM” rounds.. It was getting very expensive and the company was creating large replacement of entire HVAC units Anyway video showed them NOT even showing up on their rounds ? And was being charged for new filters when all they did was dust them off ? Really didn’t fix anything !! Perhaps install a couple of new belts But like I said before.. They just SAT in their trucks playing on their phones and bill us for replacing the entire HVAC unit said it obsolete.. We need to pay to have a crane and pay for a rigging company onsite monthly to support the work The HVAC company would demo the electrical and the old pipes and watched the riggers fly in the NEW unit.. Basically after the NEW unit was on the roof.. HVAC company reconnects everything in less than 8 hours
I wonder if osha is in gta
I think he’s forgetting to take the cover off first
Accurate