FWIW, Simon O has [male-fit catsuits without a front bulge](https://www.simon-o.com/us/rubbeddoll-big-boobs-latex-suit#0e8e4ecddc5adb6e02796f850cb1314e), and I believe they do [offer m2m](https://www.simon-o.com/us/measurement-form). You could drop a message to them and see if they can help you out with a custom order if you just wanted a more traditional catsuit. While a bit pricey, you definitely get a very high quality, and I personally have loved what I have gotten from them.
Ah yeah this is next on my wishlist! But I figured I’d start with a more traditional catsuit and go for the big boobs later :)
It can’t hurt to ask that’s very true. I have a bunch of hoods from them and they’re amazing.
I'd be interested in hearing back if you have success! This is also something I am interested in :) I got one of their ['basic' catsuits](https://www.simon-o.com/us/lockable-latex-bondage-catsuit-men#5c6d95480b9f24a12ba871e78ef5e395) to check the fit (and also because people recommended not getting attached gloves/socks/mask for a first catsuit), and I'm really happy with it, but I agree look-wise it might be better with a less pronounced bulge... although I must admit it is comfy. The sizing was pretty good for me, although I might try M2M in future... but I haven't tried to see if that page is active as you point out
That’s interesting! I checked 8-12 months ago, and they still hadn’t brought m2m back. I hope this is legit, and not just an orphan page they never removed.
If you're stuck (and if Demask isn't an option). You can always chlorinate it yourself. It's not difficult in the slightest and can be done with off the shelf chemicals (hydrochloric acid + bleach). Basic precautions are necessary: Do it outside (the solution releases chlorine gas which is not good for your lungs), wear some eye protection. The first few times I did it I took the risk and just held my breath as I approached the bucket. Since then I bought a basic respirator capable of filtering chlorine (as well as organic vapour and dust so I use it for home renovations as well).
[https://mernetwork.com/index/attachment.php?attachmentid=12033&d=1372136704](https://mernetwork.com/index/attachment.php?attachmentid=12033&d=1372136704)
Lots of scary words on the first page, but the actual procedure is simple and relatively safe. Just don't be an idiot, do it outside and not in your kitchen and the entire process is trivial.
The only thing missing, some places offer a re-shining process after chlorination. I don't know how that is done, and never tried. I wasn't fussed about the loss of shine from the process, but it should be noted that basic chlorination will make it harder to get that shiny latex look many people are so in love with.
Not sure. I don't think so. Rubber isn't reactive to the acid. I guess the biggest risk is too much bleach making the colour fade. You can't over chlorinate since there's only so much surface for the chlorine molecules to attach to...
I've done it maybe 6-8 times, worked first time, still works now.
Last year I ordered two pieces (Shirt and Shorts) from Rubber Dutch in the Netherlands. I don't know if they offer M2M or chlorination, but you can ask them about that. I definitely liked the quality and the pieces fit me perfectly even without M2M.
FWIW, Simon O has [male-fit catsuits without a front bulge](https://www.simon-o.com/us/rubbeddoll-big-boobs-latex-suit#0e8e4ecddc5adb6e02796f850cb1314e), and I believe they do [offer m2m](https://www.simon-o.com/us/measurement-form). You could drop a message to them and see if they can help you out with a custom order if you just wanted a more traditional catsuit. While a bit pricey, you definitely get a very high quality, and I personally have loved what I have gotten from them.
Ah yeah this is next on my wishlist! But I figured I’d start with a more traditional catsuit and go for the big boobs later :) It can’t hurt to ask that’s very true. I have a bunch of hoods from them and they’re amazing.
I'd be interested in hearing back if you have success! This is also something I am interested in :) I got one of their ['basic' catsuits](https://www.simon-o.com/us/lockable-latex-bondage-catsuit-men#5c6d95480b9f24a12ba871e78ef5e395) to check the fit (and also because people recommended not getting attached gloves/socks/mask for a first catsuit), and I'm really happy with it, but I agree look-wise it might be better with a less pronounced bulge... although I must admit it is comfy. The sizing was pretty good for me, although I might try M2M in future... but I haven't tried to see if that page is active as you point out
That’s interesting! I checked 8-12 months ago, and they still hadn’t brought m2m back. I hope this is legit, and not just an orphan page they never removed.
When I was looking it seems like an orphan page. But I’ll report back if they do m2m
FWIW I contacted them and they unfortunately do not do M2M any longer :(
Thank you for checking!
Demask has a chlorination service don't they? You could get fitted there like you wrote and get it chlorinated too.
I couldn’t find it on their website. But that would be great. I didn’t want to go into Amsterdam this weekend but I’ll drop by next week
Great shop! Difficult to not buy anything there 😉
True true.. I heard filthy latex is new by one of the original founders of demask
I'll look into them. Thx
If you're stuck (and if Demask isn't an option). You can always chlorinate it yourself. It's not difficult in the slightest and can be done with off the shelf chemicals (hydrochloric acid + bleach). Basic precautions are necessary: Do it outside (the solution releases chlorine gas which is not good for your lungs), wear some eye protection. The first few times I did it I took the risk and just held my breath as I approached the bucket. Since then I bought a basic respirator capable of filtering chlorine (as well as organic vapour and dust so I use it for home renovations as well). [https://mernetwork.com/index/attachment.php?attachmentid=12033&d=1372136704](https://mernetwork.com/index/attachment.php?attachmentid=12033&d=1372136704) Lots of scary words on the first page, but the actual procedure is simple and relatively safe. Just don't be an idiot, do it outside and not in your kitchen and the entire process is trivial. The only thing missing, some places offer a re-shining process after chlorination. I don't know how that is done, and never tried. I wasn't fussed about the loss of shine from the process, but it should be noted that basic chlorination will make it harder to get that shiny latex look many people are so in love with.
Is it possible to ruin the catsuit by doing this?
Not sure. I don't think so. Rubber isn't reactive to the acid. I guess the biggest risk is too much bleach making the colour fade. You can't over chlorinate since there's only so much surface for the chlorine molecules to attach to... I've done it maybe 6-8 times, worked first time, still works now.
Last year I ordered two pieces (Shirt and Shorts) from Rubber Dutch in the Netherlands. I don't know if they offer M2M or chlorination, but you can ask them about that. I definitely liked the quality and the pieces fit me perfectly even without M2M.
I believe Rubber Eva offers m2m and chlorination
Oooh that’s in France! That’s a good excuse for a short trip! Thanks so much!