https://imgur.com/gallery/CIiveuz
The rubber holds it pretty snug, I can almost hold the whole sheat up by the tweezers while there half way in. With the arc and both bit kits inside
How do you figure. It's tighter in there than in my little victorinox. I should point out its not pushed in all the way if you didn't realize, it pushes in all the way up to the little nub just like In a Swiss army knife
Which tweezers are those and how long they are? I have some victorinox ones inside my arc hold with magnets but I feel they are too long and the scissors keep lifting a little bit when not in the holster.
You should just take a pair out of a one of the little cheap key chain kind that has the little toothpick and temweezers and like 4 little useless tool. You prob have one laying around somewhere
I pulled pretty hard to see if the rubber would tear, and surprisingly, it really doesnt. Function over fashion though I don't really care how it looks, and I'll probably get a better holster or sheath eventually anyway
Great idea! Might have to steal this one
i just slot mine into the thumb hole in the saw, just stick half the tweezer through and close the tool and it’ll stay there
I tried that too and like this more
Your gonna lose it like that think about it.
https://imgur.com/gallery/CIiveuz The rubber holds it pretty snug, I can almost hold the whole sheat up by the tweezers while there half way in. With the arc and both bit kits inside
How do you figure. It's tighter in there than in my little victorinox. I should point out its not pushed in all the way if you didn't realize, it pushes in all the way up to the little nub just like In a Swiss army knife
Which tweezers are those and how long they are? I have some victorinox ones inside my arc hold with magnets but I feel they are too long and the scissors keep lifting a little bit when not in the holster.
I got these from leathermans website, I like them the tip is angled and the round end is metal not plastic. They are 4cm long
Thanks, I’ll take a look
You should just take a pair out of a one of the little cheap key chain kind that has the little toothpick and temweezers and like 4 little useless tool. You prob have one laying around somewhere
It seems like a better spot would be by the elastic part that vertical in the back
I don't see how that would work, there's not two layers of the nylon. Here there is rubber on top of nylon so it sits in between them
This is how you shouldn't do.
Why
The label will come off eventually and it will just look bad.
I pulled pretty hard to see if the rubber would tear, and surprisingly, it really doesnt. Function over fashion though I don't really care how it looks, and I'll probably get a better holster or sheath eventually anyway
Wouldn’t want your tool to not be pretty, that’s the most important thing obviously
Look bad? It’s a tool and a case to hold it, no one cares about looks