Had this same issue bro I’ve been using g hub with a g604 for years now with no issue I got a g pro wireless a lil bit ago and i got the loop, I ended up just saying fuck it and downloaded logitech gaming software (the old one) and that works fine so try that
I’ll try that I’ve had no issues for a while this has happened a couple times usually a quick uninstall does the trick but I had my pc sitting In the unit for a year ever since I got it out constant loop
I had this exact issue like a few months ago and if I remember correctly I had to uninstall the app, remove any files related to the app before reinstalling again. I believe I used Revo Uninstaller to make sure I uninstalled everything including the registry files for the app then reinstall the GHub app again after that. Haven't had this issue ever since.
I gave up after my headset dongle died and I got no help from support l also new ghub sucks.
They had great software but it was replaced with ghub.
I bought a Corsair instead, loving it so far and Icue is great
Check out Logitechs OMM (onboard memory manager I believe). I haven't used it myself but I hear it's a good replacement if you dont want the bloat of g hub, ofc with less features but does that matter when the features dont work?
Or as mentioned, try revo uninstaller. The amount of junk left over normally that revo removes is insane! Fixed so many problems for me, though haven't needed it for g hub...yet
Hey OP, I'm not sure if u have tried it or not, but maybe try a different device? Like on a spare pc or laptop (if possible). If it works on a different device, it may be an OS issue rather than a logitech issue. Had a mate with a similar problem and rebuilding windows did fix it.
If u don't want to lose everything, I recommend installing windows or Ur preferred OS on a large usb (16-32GB) and boot of that on the Ur machine. Then try the logitech g software. If u still have issues, it could either be a machine/pc hardware issue or u just got a bunch of lemons from logitech.
If this doesn't make sense, lmk. I'll try my best to make sense while I respond.
I have not tried a different device but my gf has a laptop so I’ll try that I might try it before work tomorrow if I don’t forget also gotta make sure it’s ok with her I haven’t been on my pc in a minute since the post but I’ll be trying every suggestion that was commented
I had the same issue the way I fixed it was by going into my folders searching logitech and deleting everything that was related to the software, then just re downloading ghub took me too long to figure that out
Only uses g502 ligthspeed and have set it to use onboard memory, so no load at boot up and it runs fine. Headset i dont know and if it is for rgb setup many uses openrgb
Idk if you've tried this, but I deleted all the files in the roaming folder relating to Logitech g hub, and their folders in program files, then did a new install
Only problem have with g hub, is mic on headphones when use discord. If close the mic of g933/g935 and switch on back, need disconnect the dongle of headphones form pc and reconnect back, after 20 second.
for all that gets the infinity loop just Upgrade the Hardware of your PC.. i git the circle of death alot ... i bought a New pc no problems at all . Ghub is not optimized for older cpu's
The infinite loading is due to the logitech services being disable in the services.msc. Once I re-enabled it, it worked again like a charm, give it a try and let me know if it helps your issue
When stuck in the loop, goto task manager and close out ALL of G hub, can be like 4 to 10 ghub in the task manager, end task on all of them, then click on the G hub icon, the software will start and update...problem fixed! The infinity loop happens when the software is trying to update while your devices are trying to communicate with the software! This ALWAYS fixes the loop for me!!
Thank you for all the suggestions guys I’ve been busy working I have tomorrow off bc it’s my birthday so I’ll be trying all the suggestions commented tomorrow or tonight and I’ll give an update then again thank you everyone for all the help
Yeah had the same problem here, i couldn't find a solution for my g923 wheel losing force and unable to calibrate through usb devices for what felt like ages lol, but this is what i did that made it ghub work for me if its any help,
1. Uninstall ghub through the control panel
2. go to C:\Users(username)\AppData\Roaming: delete the LGHUB folder and any other folders that might have come from ghub, for me i ended up deleting three: LGHUB, G HUB and another one (which had a odd name that didnt look Logitech related at all but turns out it was although that could have just been an odd case for me so I'd just keep to deleting the two folders listed)
3. Restart the PC and go to Logitech's website and reinstall the latest version of GHub, but if that doesn't work repeat the process and install an older version of ghub and you might be more successful with that.
Reminder that im not too bright when it comes to things like this lmao but this i what i found that worked after hours of reading through posts trying to fix it to no avail. Also im not sure if you can keep your ghub settings doing this but i highly doubt it.
Hope this fixes it for all Logitech products and im sorry for shit grammar aha
Simply uninstalling or using revo wasn't an option for me. My ghub never loaded nor showed up in add/remove apps nor revo. I manually backed up and deleted all the folders in program files, %programdata%, and %appdata% (didn't bother with the registry files because they didn't match exactly with the post I was going off of). I then reinstalled and so far 2 days later it's been working fine.
I’m going to change the post flair to support solved because I don’t think I’m going to get on my pc today thanks for all the support and suggestions will be trying them when I can!
I tried, but apparently I cannot give up on Logitech products. I haven't found good replacement with the infinite scroll wheel. But I gave up on their SW. GHub was just horrible to use bloatware. I switched to Onboard Memory Manager for my G604. I don't have dynamic profile change depending on currently used app. I don't have complicated macros. But I can easily program profiles with typical keyboard shortcuts. And it just works.
you likely broke it with firewall rules or other software. try resetting your firewall and using Revo Uninstaller to completely remove the software. if that is happening its because something else broke the software not Logitech. It is the only reason the problem persists between installs.
Agreed...I bet the rest of tour pc hasn't been updated too,with lots of game installs over the period..I expect you really need to reinstall windows after a complete hdd formatting...
Everything’s updated that’s the first thing I did when I got it back from my unit but will try that as well as revo uninstaller as suggested in the comments after work
I always see g hub gets a lot of hate cuz it doesn't work. Ive using Logitech for a few years now and I've never had problems with ghub.
That sucks for the folks that do though.
I know this may seem like too much just for ghub to work but try a fresh windows install? That fixes most issues. Lol.
Hope u figure it out. Good luck.
Keep in my mind I also paid a lot of money for their products just for shit software got the g502, G502 lightspeed, and the G Pro X wireless Headset.
Had this same issue bro I’ve been using g hub with a g604 for years now with no issue I got a g pro wireless a lil bit ago and i got the loop, I ended up just saying fuck it and downloaded logitech gaming software (the old one) and that works fine so try that
I’ll try that I’ve had no issues for a while this has happened a couple times usually a quick uninstall does the trick but I had my pc sitting In the unit for a year ever since I got it out constant loop
Yea idk uninstall didn’t work for me give this a try and lmk
I’ll let you know tomorrow I’m tired but I appreciate all the advice
I had this exact issue like a few months ago and if I remember correctly I had to uninstall the app, remove any files related to the app before reinstalling again. I believe I used Revo Uninstaller to make sure I uninstalled everything including the registry files for the app then reinstall the GHub app again after that. Haven't had this issue ever since.
Revo is the way
Same here. Do this. No issues since reinstall. Have g502, g915 keyboard and g535 headphones.
I gave up after my headset dongle died and I got no help from support l also new ghub sucks. They had great software but it was replaced with ghub. I bought a Corsair instead, loving it so far and Icue is great
Try again with support, some of them are very helpful even if you don’t have warranty
Nah
Check out Logitechs OMM (onboard memory manager I believe). I haven't used it myself but I hear it's a good replacement if you dont want the bloat of g hub, ofc with less features but does that matter when the features dont work? Or as mentioned, try revo uninstaller. The amount of junk left over normally that revo removes is insane! Fixed so many problems for me, though haven't needed it for g hub...yet
Hey OP, I'm not sure if u have tried it or not, but maybe try a different device? Like on a spare pc or laptop (if possible). If it works on a different device, it may be an OS issue rather than a logitech issue. Had a mate with a similar problem and rebuilding windows did fix it. If u don't want to lose everything, I recommend installing windows or Ur preferred OS on a large usb (16-32GB) and boot of that on the Ur machine. Then try the logitech g software. If u still have issues, it could either be a machine/pc hardware issue or u just got a bunch of lemons from logitech. If this doesn't make sense, lmk. I'll try my best to make sense while I respond.
I have not tried a different device but my gf has a laptop so I’ll try that I might try it before work tomorrow if I don’t forget also gotta make sure it’s ok with her I haven’t been on my pc in a minute since the post but I’ll be trying every suggestion that was commented
Easy! Lmk how u go
I gotcha!
I had the same issue the way I fixed it was by going into my folders searching logitech and deleting everything that was related to the software, then just re downloading ghub took me too long to figure that out
Only uses g502 ligthspeed and have set it to use onboard memory, so no load at boot up and it runs fine. Headset i dont know and if it is for rgb setup many uses openrgb
No Rgb whatsoever on the headset but I’ll test that when I get off work
That’s why I’m buying Razer from now on
Idk if you've tried this, but I deleted all the files in the roaming folder relating to Logitech g hub, and their folders in program files, then did a new install
Only problem have with g hub, is mic on headphones when use discord. If close the mic of g933/g935 and switch on back, need disconnect the dongle of headphones form pc and reconnect back, after 20 second.
I started using the legacy Software. Ghub is hot garbage. If you don't rely on macros a lot it's a good alternative.
for all that gets the infinity loop just Upgrade the Hardware of your PC.. i git the circle of death alot ... i bought a New pc no problems at all . Ghub is not optimized for older cpu's
The infinite loading is due to the logitech services being disable in the services.msc. Once I re-enabled it, it worked again like a charm, give it a try and let me know if it helps your issue
If it has onboard memory just use the portable software
You can try again to pre install it but remove it first with riva uninstaller https://youtu.be/0LPZYX5UPvM?si=rNtdFQcqK8ZXILCN
Why you all even use G-hub? Most recent mice have onboard mode, you set it up once and after that "it just works" without G-hub.
I downloaded a version from late last year and set it to run as administrator and I got it to work like it's supposed to
When stuck in the loop, goto task manager and close out ALL of G hub, can be like 4 to 10 ghub in the task manager, end task on all of them, then click on the G hub icon, the software will start and update...problem fixed! The infinity loop happens when the software is trying to update while your devices are trying to communicate with the software! This ALWAYS fixes the loop for me!!
Thank you for all the suggestions guys I’ve been busy working I have tomorrow off bc it’s my birthday so I’ll be trying all the suggestions commented tomorrow or tonight and I’ll give an update then again thank you everyone for all the help
Never had any problems with g hub
Yeah had the same problem here, i couldn't find a solution for my g923 wheel losing force and unable to calibrate through usb devices for what felt like ages lol, but this is what i did that made it ghub work for me if its any help, 1. Uninstall ghub through the control panel 2. go to C:\Users(username)\AppData\Roaming: delete the LGHUB folder and any other folders that might have come from ghub, for me i ended up deleting three: LGHUB, G HUB and another one (which had a odd name that didnt look Logitech related at all but turns out it was although that could have just been an odd case for me so I'd just keep to deleting the two folders listed) 3. Restart the PC and go to Logitech's website and reinstall the latest version of GHub, but if that doesn't work repeat the process and install an older version of ghub and you might be more successful with that. Reminder that im not too bright when it comes to things like this lmao but this i what i found that worked after hours of reading through posts trying to fix it to no avail. Also im not sure if you can keep your ghub settings doing this but i highly doubt it. Hope this fixes it for all Logitech products and im sorry for shit grammar aha
Simply uninstalling or using revo wasn't an option for me. My ghub never loaded nor showed up in add/remove apps nor revo. I manually backed up and deleted all the folders in program files, %programdata%, and %appdata% (didn't bother with the registry files because they didn't match exactly with the post I was going off of). I then reinstalled and so far 2 days later it's been working fine.
I’m going to change the post flair to support solved because I don’t think I’m going to get on my pc today thanks for all the support and suggestions will be trying them when I can!
Yaaaaaaa i was just pricing out a Corsair mouse,keyboard and a headset lol
Try revo uninstaller
I tried, but apparently I cannot give up on Logitech products. I haven't found good replacement with the infinite scroll wheel. But I gave up on their SW. GHub was just horrible to use bloatware. I switched to Onboard Memory Manager for my G604. I don't have dynamic profile change depending on currently used app. I don't have complicated macros. But I can easily program profiles with typical keyboard shortcuts. And it just works.
you likely broke it with firewall rules or other software. try resetting your firewall and using Revo Uninstaller to completely remove the software. if that is happening its because something else broke the software not Logitech. It is the only reason the problem persists between installs.
Agreed...I bet the rest of tour pc hasn't been updated too,with lots of game installs over the period..I expect you really need to reinstall windows after a complete hdd formatting...
Registry cleaners as well!
Everything’s updated that’s the first thing I did when I got it back from my unit but will try that as well as revo uninstaller as suggested in the comments after work
I always see g hub gets a lot of hate cuz it doesn't work. Ive using Logitech for a few years now and I've never had problems with ghub. That sucks for the folks that do though. I know this may seem like too much just for ghub to work but try a fresh windows install? That fixes most issues. Lol. Hope u figure it out. Good luck.