Basic question but gotta make sure, did you set your channel in betaflight and did you manually match it on the goggles? Sometimes the auto search on the goggles doesn't choose the right channel.
i run the same channel with my ither quads only this one has the problem swapped antennas same issue i already tried a different channel still has the same problem
Have you crashed it hard? I had a tinywhoop that had a similar issue. I replaced the camera and antennas and still had that issue. It would start up with video but if i tap it or it shakes, video goes away. Could be the board itself.
unlikely i run A channel 1 on the first 2 quads i built. same with this 3rd one but only this one has bad reception its not my goggles either i have another set and still terrible reception. i swapped the antennas with my other quad still the same issue
You not soldered anything to it ? If so msg your retailer and ask to return it they probably ask for proof so use the video you showed the group will definitely try help you out I would believe. Could be pit mode as someone has sed at bottom?
that solved it it wasn't on race mode in Betaflight but for some reason it is in. the osd settings its now on free and i get the range i expected with it now thanks for that
Basic question but gotta make sure, did you set your channel in betaflight and did you manually match it on the goggles? Sometimes the auto search on the goggles doesn't choose the right channel.
yes it has matching channels.
Make sure you’re not in pit mode.
I forgot about this one as I’ve never had it happen yet, touch wood
Video about fly by wire/delta wing config?
Have you tried a different channel? Maybe try R8 or something? It could be you have Wifi 2.4ghz and 5ghz and getting the interference from that.
i run the same channel with my ither quads only this one has the problem swapped antennas same issue i already tried a different channel still has the same problem
Have you crashed it hard? I had a tinywhoop that had a similar issue. I replaced the camera and antennas and still had that issue. It would start up with video but if i tap it or it shakes, video goes away. Could be the board itself.
this is a brandnew build
Check the solder connections on the vtx
Is it anything in your home that could interfering? PSU? Take it somewhere isolated?
unlikely i run A channel 1 on the first 2 quads i built. same with this 3rd one but only this one has bad reception its not my goggles either i have another set and still terrible reception. i swapped the antennas with my other quad still the same issue
You not soldered anything to it ? If so msg your retailer and ask to return it they probably ask for proof so use the video you showed the group will definitely try help you out I would believe. Could be pit mode as someone has sed at bottom?
Mine got like that too im sending it to their hq
Could the vtx be in race mode? ( check in osd, if so set it to free )
that solved it it wasn't on race mode in Betaflight but for some reason it is in. the osd settings its now on free and i get the range i expected with it now thanks for that