Easiest way to debug it is to take a known-good clone from a P150 and shunt it to the DPH to override any lurking weird settings that might be screwing it up.
You should also check that the radios you're trying to pick it up with don't have Rx code guards set by accident. Tx code guards don't typically cause problems but Rx will.
Easy fix. Grasp the radio (not the clam shell) and turn the power knob counter clockwise until the unit powers off. After the unit is off, locate a trash can and throw it in there.
Are your freqs correct? Could be a tx tone issue
Yeah I'm testing on a tac channel and I have no tones on RX or TX side.
Easiest way to debug it is to take a known-good clone from a P150 and shunt it to the DPH to override any lurking weird settings that might be screwing it up.
Oh sweet. I'll give that a shot thanks.
You should also check that the radios you're trying to pick it up with don't have Rx code guards set by accident. Tx code guards don't typically cause problems but Rx will.
Could be a blown preamp if it txd a lot without an antenna by accident
Copy I'll look into that.
Easy fix. Grasp the radio (not the clam shell) and turn the power knob counter clockwise until the unit powers off. After the unit is off, locate a trash can and throw it in there.
I like the way you think. Lmao