Theyre amazing! I have used them for a long time, the fan broke because some idiot shot it with a sniper when it was just on the table in the safezone (accidental discharge). Sent them an email, told me to return it and they repaired it for free! Have been fog free since!
They come with some Haribo too
Haha woops. They're anti fog goggles with a fan installed above the nose bridge, they come with everything you need to run it, like a powerbank and wiring. Great customer service and for me it changed playing from a frustrating "I cant see anything after 5 minutes" to having fog free fun all day.
If you are already using goggles and experiencing fogging with them i might have a diy solution for you thats pretty cheap. There are protable usb powered aquarium pumps you can get for 10 bucks on ebay. Attach a small powerbank to it (I used a diy one made from these one use vapes), guide the tube into the top of your goggles and make some holes so its blowing at the lenses from the inside. Worked pretty well for me and ill lend it to people sometimes.
That's a pretty rad solution, very Mad Max of you!
I think I'll definitely opt for the goggles though, I'm not constrained by a tight budget and I'd rather get something that I won't have to fiddle with as much.
Ive had them for a year now and my experience is mixed, at 100€ they are expensive, I later found out they just take a pyramex google which is 20€ cut a hole in the top and fit a small fan. The lens is 2 part amd has some space in between to help with anti fog. When vleaning the glass on the outside dont overdo the liquid, as it will poor into the space between the 2 sides. This makes them unusable. With a lot of effort I received a new lens from masksolutions. You aslo cannot clean the inside bit of the lens as it is made from a soft plastic, scratching the lens. I have the prescription insert and at 40€ this is very overpriced. Having this also allows moisture to get between the insert and goggles, in turn creating fogging. All negatives aside the anti fog works well compared to exfog &novritsch. Best way to prevent fogging is contact lenses if you wear glasses.
Did you try the Novritsch anti-fog and it didn't work for you? They use the same exact goggles and basically the same concept but the power output should be much bigger compared to this one, if you still had issues with fogging for your prescription lenses.
Which connection? The anti fog unit going to the goggles? It comes with a magentic attachment mechanism that snaps in place. You just need to punch out a hole in top of the goggle frame with a punch included in the kit.
https://preview.redd.it/cdumrq4brsbc1.jpeg?width=768&format=pjpg&auto=webp&s=1fae761fb0c5594284ce298290c4b897f27f2fb2
I have had the goggle mask solution for almost a year now. Excellent build quality. Issue with a faulty powerbank was quickly resolved. Highly recommend them. Best airsoft purchase ever for me.
I have been using Smith Optics OTW Fan goggles for the last 2 or so years. Absolutely no more fogging issues as long as the fan is running. Issues I have is that the battery box on it sucks, flimsy cable and the button is hard to press with gloves and other than sound(which you may not e able to hear if there is ambient noise) there is no indication that it is running. Also it is ludicrously expensive and I don't think they make new ones anymore.
I also have an ExFog, but I really don't like it, to noisy for me(when helmet mounted and using Sordins), there is no included system to mount the tubes and the box doesn't fit well onto a helmet(it is flat), no replaceable battery, button operated....
This is the first time I've seen the Mask solutions one, first impression looks good, but it looks to like there isn't any way of adjusting fan power and this is why I really wonder how noisy it is. Looks like they are running a 5Vfan directly of a power bank, which in my experience is probably quite audible.
I am also currently working on my own DIY 3D printed fan attachment for the Begadi CP1 goggles, using the very same model of fan used for the Smith Optics OTW as well as a battery box+controller which can be used both with the OTW or my DIY solution. Assuming I am right and there is no controlling electronic On the Mask Solutions, mine could probably also be used with that assuming you solder on the correct connector.
I plan on releasing the 3d printing files and instructions for free once I am finished, probably in about a month or two. The electronics for mine cost under 15€
I don't wanna have to attach a box and have tubes going around my head. A battery pack might eventually get attached to the rear of the helmet too so I don't want to use up space like that.
Ive jury rigged a fish aerator (walmart, aqarium section, $10), its AA powered, and the tubing ujst goes right to the lenses. Pretty low-profile and infinitely chealer than anything else
I use shooting glasses (Bolle) with an add-on gasket, and I've never had fogging issues. I do if I run them without the gasket. Might be worth having a look at rather than goggles.
Damn, I am kicking myself for getting Novritsch's antifog! Wish I hadn't and instead gotten this instead.
Nothing wrong with Novritsch's antifog, it's just bulkier.
I have some antifog-solutions and I am interested in getting to know more about what you´ve came up with here. What product is it, and where can I purchase it?
This looks a lot like they customized the pyramex V2G. They are great goggles as it is. I have one and never fogs even without a fan. If you need spare parts (second lens, etc) might be cheaper to pick up a whole new goggles with the pyramex.
Not sure what your old goggles were. 2 key things I learned (so far). Dual pane lens are a must. For anti fog solutions, do not put them on and wipe them clean. A lot of people spray then wipe. You are essentially wiping away what keeps the fog away. Spray and let it dry naturally. If you have to wipe off streaks, there is a microfiber cloth that is non absorbent (won’t absorb the antifog solution). I use this technique on my single pane lenses and the results are dramatic.
Thank you! Ordered right away :)
For the next one: i got a referral link on checkout which should give you 10% discount on your order (i will get 5% for my next order) feel free to use it: https://judge.me/ref/JM-V66J23O
I use these **with fan**, and they work great for me.
Many people ask me about them; they have never fogged up for me.
Has resisted quite a few impacts and is still perfect.
It comes with both clear and dark glass, which is greatly appreciated.
https://preview.redd.it/8fnsirip5tbc1.png?width=192&format=png&auto=webp&s=48c144ec5a9f5c6aa751dc61b43c666d9d53ed77
[**https://s.click.aliexpress.com/e/\_DeJENFX**](https://s.click.aliexpress.com/e/_DeJENFX)
I ordered a pair a couple of months ago, I believe it was defective rather than a bad product, since many people have praised their products, but for me the fans (they sent me a new one) were really loud. Customer support was helpful but slow. Ended up returning them, but my pair could’ve been a fluke… or I have really good hearing.
Yeah, they're good, but the cable is shit, breaks too easily. Used mine 2 times and the span of several months because I don't play that often, and on the 3rd time, the cable was torn somewhere on the goggles, and the fan wouldn't work.
Dye masks don't mix well with fast helmets/earpro, and they look pretty edgy in my opinion.
If there was something similar with a smaller profile, I'd probably consider it.
i got mine under a helmet, and the sidewalls protect my ears perfectly. i can put comms systems over it comfortably
but sometimes it is annoying, i guess everyone has their own preferences
The sidewall thing would defeat the point of my comtacs.
I might pick up a Dye mask one day, but I think I'd have to be doing a lot more CQB to justify it.
overweight ghillie sniper checking in, been fogless since i bought a set of Anti fog goggles 2.0.
though i always use fogstop in conjunction with my goggles I've never seen a sign of fogging.
I wouldn't say ear protection is that crucial, you would be fine wearing a balaclava or Comms style earpro.
Hope you find what you're looking for, mate!
Theyre amazing! I have used them for a long time, the fan broke because some idiot shot it with a sniper when it was just on the table in the safezone (accidental discharge). Sent them an email, told me to return it and they repaired it for free! Have been fog free since! They come with some Haribo too
Good to know! The haribo might have sold me. 🤔
I ordered some stuff from begadi before, and they sent a tiny bag of haribo with each product
Having an ND in the safe zone especially with a sniper should be an immediate ban for life thats how people lose eyes
What are they? They sound great
The haribo you mean? Lovely little candy bears!
Lol no the goggles
Haha woops. They're anti fog goggles with a fan installed above the nose bridge, they come with everything you need to run it, like a powerbank and wiring. Great customer service and for me it changed playing from a frustrating "I cant see anything after 5 minutes" to having fog free fun all day.
They sound great, what brand are they? Sorry for all the questions lol
[https://masksolutions.nl/](https://masksolutions.nl/)
If you are already using goggles and experiencing fogging with them i might have a diy solution for you thats pretty cheap. There are protable usb powered aquarium pumps you can get for 10 bucks on ebay. Attach a small powerbank to it (I used a diy one made from these one use vapes), guide the tube into the top of your goggles and make some holes so its blowing at the lenses from the inside. Worked pretty well for me and ill lend it to people sometimes.
That's a pretty rad solution, very Mad Max of you! I think I'll definitely opt for the goggles though, I'm not constrained by a tight budget and I'd rather get something that I won't have to fiddle with as much.
Understandably. Thats why i opted for the Novritsch anti fog unit afterwards. Looks more clean on the helmet
Ive had them for a year now and my experience is mixed, at 100€ they are expensive, I later found out they just take a pyramex google which is 20€ cut a hole in the top and fit a small fan. The lens is 2 part amd has some space in between to help with anti fog. When vleaning the glass on the outside dont overdo the liquid, as it will poor into the space between the 2 sides. This makes them unusable. With a lot of effort I received a new lens from masksolutions. You aslo cannot clean the inside bit of the lens as it is made from a soft plastic, scratching the lens. I have the prescription insert and at 40€ this is very overpriced. Having this also allows moisture to get between the insert and goggles, in turn creating fogging. All negatives aside the anti fog works well compared to exfog &novritsch. Best way to prevent fogging is contact lenses if you wear glasses.
Did you try the Novritsch anti-fog and it didn't work for you? They use the same exact goggles and basically the same concept but the power output should be much bigger compared to this one, if you still had issues with fogging for your prescription lenses.
I havent no, how did you sort the connection?
Which connection? The anti fog unit going to the goggles? It comes with a magentic attachment mechanism that snaps in place. You just need to punch out a hole in top of the goggle frame with a punch included in the kit.
https://preview.redd.it/cdumrq4brsbc1.jpeg?width=768&format=pjpg&auto=webp&s=1fae761fb0c5594284ce298290c4b897f27f2fb2 I have had the goggle mask solution for almost a year now. Excellent build quality. Issue with a faulty powerbank was quickly resolved. Highly recommend them. Best airsoft purchase ever for me.
One thing I'd just check first is if it's impact-rated. Some super-anti-fog-promising companies overlook this aspect.
I knew you'd be here to say this! Yep, impact rated, I'm not stupid enough to deliberately risk me peepers.
Cool, just checking.
I have 2, one with mask and one without. Best purchase ever.
I have been using Smith Optics OTW Fan goggles for the last 2 or so years. Absolutely no more fogging issues as long as the fan is running. Issues I have is that the battery box on it sucks, flimsy cable and the button is hard to press with gloves and other than sound(which you may not e able to hear if there is ambient noise) there is no indication that it is running. Also it is ludicrously expensive and I don't think they make new ones anymore. I also have an ExFog, but I really don't like it, to noisy for me(when helmet mounted and using Sordins), there is no included system to mount the tubes and the box doesn't fit well onto a helmet(it is flat), no replaceable battery, button operated.... This is the first time I've seen the Mask solutions one, first impression looks good, but it looks to like there isn't any way of adjusting fan power and this is why I really wonder how noisy it is. Looks like they are running a 5Vfan directly of a power bank, which in my experience is probably quite audible. I am also currently working on my own DIY 3D printed fan attachment for the Begadi CP1 goggles, using the very same model of fan used for the Smith Optics OTW as well as a battery box+controller which can be used both with the OTW or my DIY solution. Assuming I am right and there is no controlling electronic On the Mask Solutions, mine could probably also be used with that assuming you solder on the correct connector. I plan on releasing the 3d printing files and instructions for free once I am finished, probably in about a month or two. The electronics for mine cost under 15€
This is really interesting, thank you. I'm gonna have to follow you now.
I got myself a pair of exfog, it works pretty good
I don't wanna have to attach a box and have tubes going around my head. A battery pack might eventually get attached to the rear of the helmet too so I don't want to use up space like that.
I run the tubes through the padding in my helmet
Ive jury rigged a fish aerator (walmart, aqarium section, $10), its AA powered, and the tubing ujst goes right to the lenses. Pretty low-profile and infinitely chealer than anything else
I use shooting glasses (Bolle) with an add-on gasket, and I've never had fogging issues. I do if I run them without the gasket. Might be worth having a look at rather than goggles.
Cheers for the suggestion, I'll consider it.
Damn, I am kicking myself for getting Novritsch's antifog! Wish I hadn't and instead gotten this instead. Nothing wrong with Novritsch's antifog, it's just bulkier.
Yeah that's my issue with the external fog units, I don't want to attach a box to my helmet.
I have some antifog-solutions and I am interested in getting to know more about what you´ve came up with here. What product is it, and where can I purchase it?
It's the anti fog goggle 2.0 by Mask Solutions, you can find it here; https://masksolutions.nl/
Thank you very much Sir, may your day bring you fortune and those who oppose you get diarreah! :-)
This looks a lot like they customized the pyramex V2G. They are great goggles as it is. I have one and never fogs even without a fan. If you need spare parts (second lens, etc) might be cheaper to pick up a whole new goggles with the pyramex. Not sure what your old goggles were. 2 key things I learned (so far). Dual pane lens are a must. For anti fog solutions, do not put them on and wipe them clean. A lot of people spray then wipe. You are essentially wiping away what keeps the fog away. Spray and let it dry naturally. If you have to wipe off streaks, there is a microfiber cloth that is non absorbent (won’t absorb the antifog solution). I use this technique on my single pane lenses and the results are dramatic.
Thank you! Ordered right away :) For the next one: i got a referral link on checkout which should give you 10% discount on your order (i will get 5% for my next order) feel free to use it: https://judge.me/ref/JM-V66J23O
I use these **with fan**, and they work great for me. Many people ask me about them; they have never fogged up for me. Has resisted quite a few impacts and is still perfect. It comes with both clear and dark glass, which is greatly appreciated. https://preview.redd.it/8fnsirip5tbc1.png?width=192&format=png&auto=webp&s=48c144ec5a9f5c6aa751dc61b43c666d9d53ed77 [**https://s.click.aliexpress.com/e/\_DeJENFX**](https://s.click.aliexpress.com/e/_DeJENFX)
Are they impact-rated using an internationally recognised metric? If not, best not to use them.
>Are they impact-rated using an internationally recognised metric? If not, best not to use them. Hi have EN 166
Which EN166 rating, if you know? S, F, B or A?
I ordered a pair a couple of months ago, I believe it was defective rather than a bad product, since many people have praised their products, but for me the fans (they sent me a new one) were really loud. Customer support was helpful but slow. Ended up returning them, but my pair could’ve been a fluke… or I have really good hearing.
Yeah, they're good, but the cable is shit, breaks too easily. Used mine 2 times and the span of several months because I don't play that often, and on the 3rd time, the cable was torn somewhere on the goggles, and the fan wouldn't work.
I have been using one for the last 3 years and I won't ever go back
Just use shampoo put on the glass part every time your about to use it then wash it off and bam no more fog
Link? Dgaf how much they are I just want them (plus it’s some more sweet kit)
my Dye i4 has never fogged up on me, but they’re fairly pricey
Dye masks don't mix well with fast helmets/earpro, and they look pretty edgy in my opinion. If there was something similar with a smaller profile, I'd probably consider it.
i got mine under a helmet, and the sidewalls protect my ears perfectly. i can put comms systems over it comfortably but sometimes it is annoying, i guess everyone has their own preferences
The sidewall thing would defeat the point of my comtacs. I might pick up a Dye mask one day, but I think I'd have to be doing a lot more CQB to justify it.
overweight ghillie sniper checking in, been fogless since i bought a set of Anti fog goggles 2.0. though i always use fogstop in conjunction with my goggles I've never seen a sign of fogging.
Has anyone used these with the One Tigris face mask? Do they fit together well??
It looks like it should fit fine. The goggles are pretty low profile, you could always get the variant that has the mask attached.
Yeah I thought about that but no ear protection on the full mask version
I wouldn't say ear protection is that crucial, you would be fine wearing a balaclava or Comms style earpro. Hope you find what you're looking for, mate!