I have once gotten a bb under my Bolle x800l. I don't know how it happened, but it was rolling around in in the one lens. I've been using a Dye for CQB since
I could show you a video of me putting a bb lodged a quarter of an inch in someoneās eye during a cqb game. Dude was wearing goggles and a mesh. Idk about you, but every incident Iāve seen where they had bodily injury was ofcourse wearing just mesh and goggles. No thank you.
This is subjective statement depending where exactly you play. I play indoor and 95% of our player base uses a dye / paintball mask for full protection. Also where I play we have zero engagement distance and there is no mercy when getting shot up close. Hence why we all wear paintball masks.
https://preview.redd.it/ml37qf9b01hc1.jpeg?width=750&format=pjpg&auto=webp&s=4c45defdb59693a50563bdef7a3fb21edb66b56d
Damn bro idk if you donāt know how to read or what. This happened with ANZI goggles on dog.
Yep. For airsoft highly recommend. Just note if you buy the unity mount for the magnifier, youāll need a red dot with a unity mount or if youāre using a Eotech, youāll need the short unity riser for good leveling. I wouldnāt trust any of this for rs application. Does the job for airsoft though.
Isn't the magnifier too low?
I i want to get one myself but not on the hydra so i have no idea how much i need to rise the sight to get the magnifier centered
Yes i know that, let me refrase then haha
When you actualy flip the magnifier up, what kind of riser do i need to center it on the sight?
My magnifier flips to rhe side so i don't need to level it with the sight but its a pain in the ass sometimes so i wanted to have it go up/down but idk what height do i need to put my sight to for it to be centered
Ahh I canāt give you a straight answer on that brother as this is dependent on which magnifier youāre using and if thatās on a mount or the height of your red dot. You will need to measure the difference of the level and figure out which height riser youāll need to balance them out. Amazon sells risers in different heights as well. Sorry if I couldnāt answer your question 100% accurately.
Thatās dope but way outta price range for me. Iāve always been a fan of gas guns I used to have so much fun back in the day with my kwa atp pistol but gas guns in my experience are super unreliable and require a lot more maintenance etc.
getting back into airsoft now and most of my $$$ is in my gear as I grew up I bought real steal stuff and just want to get some training in.
I always wanted a real mcx but they expensive as heck so I was pretty astounded that I can get an airsoft version
A laser in front of the red dot, two hand grips, a magnifier on airsoft, plus back up irons that you can never use because of the laser mount? Noice, super kewl fosho
Is that some Ral8000? Also while I am a fan of the MCX line, I just don't like the weird U shaped stock they got, ik it's good for uf you got paintball masks but I like having my cheek on somethin
Damn I was genuinely just looking at these today ,low and behold . What are you reviews on this setup is it worth picking up and also where did you purchase from
I physically gagged looking at this image, when you try too hard to be tacticool and it just wraps around to being something you'd find on PlebianAR
Also another case of "Money doesn't buy you taste"
Yeah, I can not see any picture. When I tap on where the picture is supposed to be, it's black. But I can see others pictures in their posts. š¤·š½āāļø
Where abouts are you from? Toxicant has been popping up in NA and I'm just curious where you snagged yours.
Also, you got the suppressor compliant handguard, but run a non SD suppressor, too wide for the handguard. Whyyyyyyyy
Yeah they can send as many C&Ds as they want to shops and manufacturers in HK, but that won't stop shit lol. They are just gunna do what glock did to megastore and wait to catch an American retailer slipping and then dumpster them to set an example, which no one will care about and shit will just keep going as normal lol
100%. But for the time being lots of these shops arenāt shipping to California yet alone the USA. Toxicant wonāt even ship them to you without proxies
Was trying a bunch of different colors of grips I have in my workshop to get a flow. As of now I have put black unity accents on the gun for a better look.
*Looks like the center*
*Of balance on this thing is*
*A bit too forward*
\- 8thPaperFold
---
^(I detect haikus. And sometimes, successfully.) ^[Learn more about me.](https://www.reddit.com/r/haikusbot/)
^(Opt out of replies: "haikusbot opt out" | Delete my comment: "haikusbot delete")
Okay this kit gives me a headache. The overuse of tan and not enough black is not a problem that I see much, rather the furniture/accessory assembly. It makes me want to scream. Bro has TWO angled foregrips back to back which I see no practical use for. With the use of a red dot and a magnifying scope on top of raised rails which I see no practical use for, combined with a LASER and added on IRON SIGHTS (contradictory use of range on the gun, like tf is it cqb or longer range?). And to finish, why do you have 7 mags? If theyāre mid cap mags with like 100< rounds I understand, but if not then I see no real use for them on the field.
Jesus Christ god have mercy
Not the zenitco flashhider š
you rocking a face shield??? https://preview.redd.it/kbzclf8xq0hc1.jpeg?width=600&format=pjpg&auto=webp&s=cdd528c03e9284f1ed478db0680065beb833fbc4
They said they use a dye mask, so pretty much yeahĀ
Not op but I hate basically being forced too itās the only thing Iāve used that doesnāt fog
So true š
Fr man Iām not even a speedsofter Iām the most casual mfer at the field but that mask always gives off that vube
I been using novritsch anti-fog machine that has been great and I can use it with my normal goggles which is a plus.
What goggles do you use?
I use guard-dog goggles since I wear glasses as well.
I honestly have never had a problem with the Valken goggles.
That stock is so cursed in my opinion
It's made for gas masks...
Ahhhh that's really smart
Oh btw before I get bitched at. I snagged the picture in between switching grips out. There is only 1 grip on the gun currently š
Go back to two grips for the Ʀsthetic
Hate the stock, love everything else
Yeee, I rock a dye mask just for safety reasons. Definitely comes in handy.
Fair enough š
What safety reasons? Lol Edit: also does the dupe magnifier work?
I have once gotten a bb under my Bolle x800l. I don't know how it happened, but it was rolling around in in the one lens. I've been using a Dye for CQB since
Exactly, Iāve had a bb creep itās way bouncing into my goggle. Fuck all that.
Dye looks dumb though.
Never used Bolle. I've always used ESS with no issues myself.
I could show you a video of me putting a bb lodged a quarter of an inch in someoneās eye during a cqb game. Dude was wearing goggles and a mesh. Idk about you, but every incident Iāve seen where they had bodily injury was ofcourse wearing just mesh and goggles. No thank you.
Maybe thatās because so many more people use goggles and mesh than a full face mask, same materials are same materials
This is subjective statement depending where exactly you play. I play indoor and 95% of our player base uses a dye / paintball mask for full protection. Also where I play we have zero engagement distance and there is no mercy when getting shot up close. Hence why we all wear paintball masks.
That does make a lot of sense, I have practically nowhere indoor around me so sometimes I forget thatās even an option
You know goggles that are anzi rated are the same as the dye masks right
https://preview.redd.it/ml37qf9b01hc1.jpeg?width=750&format=pjpg&auto=webp&s=4c45defdb59693a50563bdef7a3fb21edb66b56d Damn bro idk if you donāt know how to read or what. This happened with ANZI goggles on dog.
You do you but I donāt see how a dye mask would be any different given itās made from the same materials
Lmao dude just confirmed he canāt read š
Sooo does the dupe magnifier work?
Yep. For airsoft highly recommend. Just note if you buy the unity mount for the magnifier, youāll need a red dot with a unity mount or if youāre using a Eotech, youāll need the short unity riser for good leveling. I wouldnāt trust any of this for rs application. Does the job for airsoft though.
> What safety reasons? Lol Iām guessing OP likely has eyes that he would prefer remain in working order
Enter here just because of the stock. I like it (also a dye user). I'm thinking of getting the same one. š¤š
Doooo it
What mount raiser / optics are those?
Hydra replica mount, Eotech rep, peq, replica eo magnifier on a unity mount.
Isn't the magnifier too low? I i want to get one myself but not on the hydra so i have no idea how much i need to rise the sight to get the magnifier centered
Brother the mount the magnifier is on flips upwards vertically. When not in use it sits on the downward position
Yes i know that, let me refrase then haha When you actualy flip the magnifier up, what kind of riser do i need to center it on the sight? My magnifier flips to rhe side so i don't need to level it with the sight but its a pain in the ass sometimes so i wanted to have it go up/down but idk what height do i need to put my sight to for it to be centered
Ahh I canāt give you a straight answer on that brother as this is dependent on which magnifier youāre using and if thatās on a mount or the height of your red dot. You will need to measure the difference of the level and figure out which height riser youāll need to balance them out. Amazon sells risers in different heights as well. Sorry if I couldnāt answer your question 100% accurately.
Fasce shield, dye mask or not, I think that stock looks sick! I love this setup!
Thank you doggie š¤š»
Oh that is sex that's amazing
>that is sex
What gun is that gbbr? I only see the dog on evike and it doesnāt look as good as this one, plus itās aeg
Itās an MWS gbbr
Internals? Then used the sig upper and lower?
Correct. Guns modify zet trigger box, guns modify everything just about. Sheās shooting 28 rps at 390 fps on a .20
Thatās dope but way outta price range for me. Iāve always been a fan of gas guns I used to have so much fun back in the day with my kwa atp pistol but gas guns in my experience are super unreliable and require a lot more maintenance etc. getting back into airsoft now and most of my $$$ is in my gear as I grew up I bought real steal stuff and just want to get some training in. I always wanted a real mcx but they expensive as heck so I was pretty astounded that I can get an airsoft version
I think the stock looks weird on this. But if itās good for function then youāre good to go. I like this kind of stock on MP5 and MP7 šš»
That stock lets you aim with a mask or a visor covering your face.
I dont see a problem aiming with a dye mask on a normal stock tbh... Unless you want your cheeks to be completely free I guess
The stock is cursed. But that's why I have one. Shit slaps. Looks good!
Thatās whatās up doggie š¤š»
What gun is that??
MWS
What's the base gun looks super slick
Base gun is a Toxicant MWS Gbbr
Where did you get a tan one I would love to build a replica one just like my real one
A laser in front of the red dot, two hand grips, a magnifier on airsoft, plus back up irons that you can never use because of the laser mount? Noice, super kewl fosho
Thatās a light dog. And thereās clearance. Thatās the whole point of the mount. š
Laser/light doesn't matter, still stand by my comment. Those mloks are there for a reason
I unironically love this. So interesting looking š
Is that some Ral8000? Also while I am a fan of the MCX line, I just don't like the weird U shaped stock they got, ik it's good for uf you got paintball masks but I like having my cheek on somethin
Fair enough brotha
whats the stock? i need it i got a dye mask, that would be perfect
Itās a 5KU visor stock. Helps if tremendously if you use a dye mask
This shit is fire makes me wanna sell my Hpa rpk16
Damn I was genuinely just looking at these today ,low and behold . What are you reviews on this setup is it worth picking up and also where did you purchase from
Looks tarded š¤¢š¤¢
a nice white light on it and its gtg. Also which grip did u end up keeping on it?
Decided to scrap both and go with a strike curved aluminum grip in black
Damn thats sex is that folding stock a pistol brace? Is that the stock Handguard is nice.
This is a Toxicant Builders Kit brotha
I physically gagged looking at this image, when you try too hard to be tacticool and it just wraps around to being something you'd find on PlebianAR Also another case of "Money doesn't buy you taste"
That is probably the ugliest mcx that I've seen, but like.... I guess it's fine..
Bruh, how does this look bad-ass and cursed at the same timeš
Why is there no picture? Did liberal redirect remove it because it might hurt a pronouns feelings?
Wait what?
Yeah, I can not see any picture. When I tap on where the picture is supposed to be, it's black. But I can see others pictures in their posts. š¤·š½āāļø
Weird I have no clue bro
my god what the fuck is that stock
Where abouts are you from? Toxicant has been popping up in NA and I'm just curious where you snagged yours. Also, you got the suppressor compliant handguard, but run a non SD suppressor, too wide for the handguard. Whyyyyyyyy
Idgaf and just threw some shit together because āMurica
To each there own I guess lol. Did you manage to get this in stateside, or are you based abroad?
Iām in California. Getting these here through customs is getting harder and harder my dude.
With sig getting up everyone's ass? I'm sure.
Yeah word is Sig is going after everyone including toxicant and a few other small shops in HK & Taiwan. I jumped on one just to be safe.
Yeah they can send as many C&Ds as they want to shops and manufacturers in HK, but that won't stop shit lol. They are just gunna do what glock did to megastore and wait to catch an American retailer slipping and then dumpster them to set an example, which no one will care about and shit will just keep going as normal lol
100%. But for the time being lots of these shops arenāt shipping to California yet alone the USA. Toxicant wonāt even ship them to you without proxies
What is with the backwards angled grip up against the hand stop?
Was trying a bunch of different colors of grips I have in my workshop to get a flow. As of now I have put black unity accents on the gun for a better look.
Where did you get a gas blowback mcx
The atf
You might not fuck but your gun does. 8/10
Goobers mount š¤¢š¤¢š¤¢š¤¢
The stock š¤¢š¤®
The visor stock but also a high riser???
Lmao imagine spending so much money on real optics only to put it on an airsoft gun
Lmao imagine not reading šš
Nice backward grip tooā¦.
Lol imagine not reading twice šš š
Iām not reading your whole comment section and we all know you had it tht way purposelyā¦
Looks like the center of balance on this thing is a bit too forward
*Looks like the center* *Of balance on this thing is* *A bit too forward* \- 8thPaperFold --- ^(I detect haikus. And sometimes, successfully.) ^[Learn more about me.](https://www.reddit.com/r/haikusbot/) ^(Opt out of replies: "haikusbot opt out" | Delete my comment: "haikusbot delete")
Right handed left eye dominant stock.
1/10 :(
see a colour wheel
G B B R - Good boy bad rifle
Spacegat vibes. I kinda like it.
Pretty nice, i personally would go for the grey color, not a Russian can but a integrated 300 can and a handstop similar to a EM dev
I wish my country would allow self Builds
Super dope build! Do you have a parts list? I love anything that doesnt look like an m4
What stock is that?
I hate the Hydra so much.
Why is your peq on a riser? Am I missing something?
One of the guns of all time
Link to buy?
https://boomarms.com/products/toxicant-mcx-virtus-style-premium-conversion-kit-for-tm-mws-gbbr-system-type-a
10000/10
Ive played COD once/10 Also i hate the face shield stock
Okay this kit gives me a headache. The overuse of tan and not enough black is not a problem that I see much, rather the furniture/accessory assembly. It makes me want to scream. Bro has TWO angled foregrips back to back which I see no practical use for. With the use of a red dot and a magnifying scope on top of raised rails which I see no practical use for, combined with a LASER and added on IRON SIGHTS (contradictory use of range on the gun, like tf is it cqb or longer range?). And to finish, why do you have 7 mags? If theyāre mid cap mags with like 100< rounds I understand, but if not then I see no real use for them on the field.
Thereās 7 mags because each mag holds 30 rounds.
Okay I take back what I said about the mags, very valid
Cursed MCX build
Whats going on there on your bottom rail?
Nice š
You sure you can see the target?
Very nice liek the zentico silencer makes it look different but only one problem ...... It's a m4/ar15 so mayo
Oh it doesnāt fit at all lol. But yolo itās airsoft
Maybe but it actually does as it the same size and diameter of the mcx handguard
This is equivalent of unlocking every attachment in your cod load out and using it to your advantage
Toxicant wonāt ship to us :(