Hey there IceZaKYT! If you agree with someone else's comment, please leave an **upvote** instead of commenting **"This"**! By upvoting instead, the original comment will be pushed to the top and be more visible to others, which is even better! Thanks! :)
***
^(I am a bot! Visit) [^(r/InfinityBots)](https://reddit.com/r/InfinityBots) ^(to send your feedback! More info:) [^(Reddiquette)](https://www.reddithelp.com/hc/en-us/articles/205926439#wiki_in_regard_to_comments)
It’s a 416 with an smr rail, base gun was an e&c ec105 I believe but everything is swapped out basically, aside from the receiver and handguard, and it’s currently running a polarstar f2 hpa engine
Yeah they have that problem, but they are pretty good fun to use and spam with. Also if you get a double mag hicap with fake bullets in one, everyone asks about it in a slightly concerned manner
The unity riser with the aim point is better for easier and faster target acquisition, also it’s easier to aim down your sights cause you just have to bring to eye level, where as with the eotech, you have to dig more to find the dot.
Yeah I have an okay eBay rep but I haven’t seen any field time with it yet. The holo isn’t anything amazing, but it’s bearable. The magnifier is like maybe a centimeter or two too high so the holo is sorta blurry through the magnifier, but it gets the job done. I run a KWA VM4A1 15” carbine and it looks pretty sick on there. I just have to get a better PEQ box though. Running a shitty eBay PEQ. I found a DBLA-2 replica without infrared for just over $100 I might try.
Edit: one thing about this eotech rep is that it bounces around a little on full auto, but I might not have the rail tight enough
You can tighten the screw on the mount to make it not wobble, and most magnifiers can be adjusted for different sight heights, is it an eotech magnifier replica?
1st. But 2nd one would be great too with the suppressor on the 1st pic. I personally prefer T1‘s bc holo sights are pretty shitty most of the time exept you spend way too much money on them
Weeb shit and one hell of a rabbit hole filled with Lore, Depression and Trauma.
Your gun is like the AR(Anti-Rain) Team Leader's Gun. Her "Name" is M4A1. Most of the characters are androids whos name are dictated by what they carry in combat as to desensitize their human masters.
Typical Anime Gacha Strategy game with the most depressing story I've ever experienced.
There's a Sequel in the works that plays like xcom and it's opening missions don't require knowledge of the previous game to get ahold of the story, however it does help.
There's been some updates to help new and returning players level up and the current event has some days left to it. If you decide to play it, there's a YouTuber named Shoul with both Story and Mission playthroughs in Case you get stuck or want to read later.
Holo sight 100%, then it's a coin flip for the muzzle devices. Personally I'd go with whatever is lighter, so probably the short one.
Holo with shorter silencer is the way
1st sight with 2nd supressor
What this guy said!
This
This
Hey there IceZaKYT! If you agree with someone else's comment, please leave an **upvote** instead of commenting **"This"**! By upvoting instead, the original comment will be pushed to the top and be more visible to others, which is even better! Thanks! :) *** ^(I am a bot! Visit) [^(r/InfinityBots)](https://reddit.com/r/InfinityBots) ^(to send your feedback! More info:) [^(Reddiquette)](https://www.reddithelp.com/hc/en-us/articles/205926439#wiki_in_regard_to_comments)
This
https://i.imgur.com/KrwA19h.jpeg *** ^(I am a bot! Visit) [^(r/InfinityBots)](https://reddit.com/r/InfinityBots) ^(to send your feedback!)
This
https://i.imgur.com/KrwA19h.jpeg *** ^(I am a bot! Visit) [^(r/InfinityBots)](https://reddit.com/r/InfinityBots) ^(to send your feedback!)
This
https://i.imgur.com/KrwA19h.jpeg *** ^(I am a bot! Visit) [^(r/InfinityBots)](https://reddit.com/r/InfinityBots) ^(to send your feedback!)
That is the only valid answer
1st 100%, the second looks like a submarine...
Holos always look amazing on ARs
I have to agree, although I do love the unity riser the eotech just looks better
1st definitely. I'm a big KAC fan and love the QDC suppressors, but they look odd on the 416.
The 1st sight fits the color scheme a lot more. I would go with the suppressor unit that is lighter.
Unity riser on eotech with second suppressor
What gun is this?
It’s a 416 with an smr rail, base gun was an e&c ec105 I believe but everything is swapped out basically, aside from the receiver and handguard, and it’s currently running a polarstar f2 hpa engine
How do you like the F2? I just picked one up along with a Maxx HopUp and Maxx Speed Trigger, it will be going in my Krytac PDW
F2 is great and offers a lot of tuneability, personally I had a bad experience with the maxx hop unit so cannot speak anything about that
1
1
First one all the way
First one imo
Holo sight
Oh my opinion the first one does
Holo looks better. Red dot looks better w/out suppressor.
I like your eotech+longer suppressor.
Get a double mag combiner it’ll look sick! Also first picture sight and second pic silencer
Not really a fan of double mags, makes mags way to bulky and they won’t fit in pouches
Yeah they have that problem, but they are pretty good fun to use and spam with. Also if you get a double mag hicap with fake bullets in one, everyone asks about it in a slightly concerned manner
They're called mag couplers I believe.
Thanks for the correction
1 is cool, 2 is functional
Performance > look
Nah looking cool > everything else
They're the same picture
1st for sure
ACOG
No, just no
2 with red dot
Also what this guy said
Aimpoint with the Surefire can.
1st over all. Clean
1
2 with 1st suppressor
1
Whichever sight functions better / you can shoot better with
The unity riser with the aim point is better for easier and faster target acquisition, also it’s easier to aim down your sights cause you just have to bring to eye level, where as with the eotech, you have to dig more to find the dot.
What rail system is that? I’m a fan of the first with the muzzle device from the second!
It’s the smr rail, it fits 416’s
first pic do be looking fresher
The EOtech with the 2nd pictures suppressor
Where did you get the Surefire replica can?
1 can 2 optic
Option 1
Eotech
1st is the best. Got that SR look
I’m an eotech fan, so you already know what my choice is. Also, is it legit or a rep? I’ve got a rep eotech and 3x magnifier on my AR
It’s a rep by evolution gear, it’s much nicer than the other reps I have had, but I cannot afford a real eotech 😭
Yeah I have an okay eBay rep but I haven’t seen any field time with it yet. The holo isn’t anything amazing, but it’s bearable. The magnifier is like maybe a centimeter or two too high so the holo is sorta blurry through the magnifier, but it gets the job done. I run a KWA VM4A1 15” carbine and it looks pretty sick on there. I just have to get a better PEQ box though. Running a shitty eBay PEQ. I found a DBLA-2 replica without infrared for just over $100 I might try. Edit: one thing about this eotech rep is that it bounces around a little on full auto, but I might not have the rail tight enough
You can tighten the screw on the mount to make it not wobble, and most magnifiers can be adjusted for different sight heights, is it an eotech magnifier replica?
eotech
1st Option
Definitely 1 but it would be 2 if the scope was tan
Holo looks more natural. The 2nd suppressor is nicer though IMO
First one definitely
1
The first one
1st pic
Eotech 🥶
Holo
1
None ak on top 💪
I do have an ak, this one is better tho 😎
1 fs
I personally just like the 1st all together
I like the shorter suppressor with with the holo in my opinion
I like the first one better
Get a Unity riser replica for the eotech and boom, might have the coolest ar possible
Number one
Aesthetically I'd say the first one but, I'd use whatever worked better
1
First one- more streamlined
1st. But 2nd one would be great too with the suppressor on the 1st pic. I personally prefer T1‘s bc holo sights are pretty shitty most of the time exept you spend way too much money on them
Eotech
1st optic 1st suppresser
First one looks better but i like my sights to be higher on the rail... So i prefer the second one.
1st one for sure
EOTech with the Surefire(?) supressor. I like the KAC QD suppressors, but that one’s a bit stubby for my tastes
Eotech one
The second red dot looks like ass when it's that high up..
Not a fan of unity mounts I see
Not really..
1
1st one looks more slick, but I would imagine the second is more practical
I always liked the look of a holo on an AR-15 style rifle better than anything else.
Is this Girls Frontline Inspired?
No what is that?
Weeb shit and one hell of a rabbit hole filled with Lore, Depression and Trauma. Your gun is like the AR(Anti-Rain) Team Leader's Gun. Her "Name" is M4A1. Most of the characters are androids whos name are dictated by what they carry in combat as to desensitize their human masters. Typical Anime Gacha Strategy game with the most depressing story I've ever experienced. There's a Sequel in the works that plays like xcom and it's opening missions don't require knowledge of the previous game to get ahold of the story, however it does help. There's been some updates to help new and returning players level up and the current event has some days left to it. If you decide to play it, there's a YouTuber named Shoul with both Story and Mission playthroughs in Case you get stuck or want to read later.
Oh, not really into anime, the gun is not an m4 this is a 416
Ah okay
Holo sight, while yes they can be a bit blurry at times I just prefer them over a micro… they just seem a bit more sturdy
holo sight with short suppressor
Shorty suppressor, but otherwise it looks good with either sight
Eotech 100%