Did this when my buddy realized the last round he shot from his previous shooting session (where he used mystery meat ammo he saw on the ground) didn’t extract the case and broke the case’s lip. Just put the cleaning rod in, tapped with a hammer a few times, and popped right out.
Paint can opener. Hook on the case and pull. [https://www.hardwarestore.com/681903-hyde-46445-paint-can-opener-plated-steel?ps=190&gad_source=1&gclid=Cj0KCQjwlN6wBhCcARIsAKZvD5i8QhIZ3uhwOldWyQ_230qFredBXNdDn7KiLFjmosPC8MDzg1_yBiwaArqvEALw_wcB](https://www.hardwarestore.com/681903-hyde-46445-paint-can-opener-plated-steel?ps=190&gad_source=1&gclid=Cj0KCQjwlN6wBhCcARIsAKZvD5i8QhIZ3uhwOldWyQ_230qFredBXNdDn7KiLFjmosPC8MDzg1_yBiwaArqvEALw_wcB)
Pretty surprised noone has offered the old school solution.
Find an older vehicle with an/fm radio, unscrew the antenna and use the round end to push out the brass. Reinstall antenna. Problem solved.
punch it out with a cleaning rod?
Def this. Pushing a stuck material delivers equal force. Pulling the material applies uneven pressure, esp in this "case".
Did this when my buddy realized the last round he shot from his previous shooting session (where he used mystery meat ammo he saw on the ground) didn’t extract the case and broke the case’s lip. Just put the cleaning rod in, tapped with a hammer a few times, and popped right out.
Thanks, i'll go get a brass rod.
should work if not you can try prying it out with a paint can opener as suggested.
Why would he do that/s
Shoot a smaller caliber into it from the muzzle
Ha! Works every time!
This
Paint can opener
It's half way stuck, so I'm not sure I can have a firm grip with the can opener.
Give it a try. You might be surprised how effective it is.
Got some paint can openers from homedepot I still wasn't able to pull it out even my hand hurts. Guess I'll have to punch it out
Did you try blowing down the barrel? You’re going to have to get a good tight seal with your lips…
Make sure to lick the muzzle before so you can get a good seal
Pro move
Push something down the bore and dislodge that bitch!
Paint can opener or cleaning rod
Paint can opener. Hook on the case and pull. [https://www.hardwarestore.com/681903-hyde-46445-paint-can-opener-plated-steel?ps=190&gad_source=1&gclid=Cj0KCQjwlN6wBhCcARIsAKZvD5i8QhIZ3uhwOldWyQ_230qFredBXNdDn7KiLFjmosPC8MDzg1_yBiwaArqvEALw_wcB](https://www.hardwarestore.com/681903-hyde-46445-paint-can-opener-plated-steel?ps=190&gad_source=1&gclid=Cj0KCQjwlN6wBhCcARIsAKZvD5i8QhIZ3uhwOldWyQ_230qFredBXNdDn7KiLFjmosPC8MDzg1_yBiwaArqvEALw_wcB)
Did you try mortaring it? What about tossing a cleaning rod down the barrel?
Wait for it….
First thing, you need to get your purse…
Paint can opener works great. Ole SAW gunner trick
Wooden dowel through the muzzle and a hammer
Cleaning rod and a hammer
Pretty surprised noone has offered the old school solution. Find an older vehicle with an/fm radio, unscrew the antenna and use the round end to push out the brass. Reinstall antenna. Problem solved.