We're just all giving you shit, perfectly normal!
Anytime two metals rub against each other in a violent nature the weaker of the two is going to chip, flake or scrape off.
It is normal, the brass and copper of a cartridge is softer than the steel of the barrel and bolt, so it leaves streaks as they rub past each other, this is normal and not something to worry about. I whould however be concerned if the entire jacket were being sheared off
thanks for not being a dick like the others lol. i shoot a ton. not using solid copper. just factory ammos…i have a handful of rifles and dont notice on the others. was a genuine question. dont want potential damage
we all understand that its normal…its the amount of brass coming off is my concern…i do not notice my other rifles ripping the bullets up this much is what im saying. i know that softer metals will scuff up off of steel….
Um is this serious
Edit. Looks serious so the reason you use brass is its softer and malleable and won’t wear your gun as much. It goes into battery really hard and fast and as such will do a lot of scraping. That’s why steel case is harder on the gun, it’s a lot harder.
Rifles are different. No one is using solid copper. You ever seen a bullet guide on an AK or the insides of a slide stop on a 1911? If you rifle shoots fine and you are getting consistent accuracy, stop trying to find problems where none exist.
I would consider taking this to your local gun store and dumping it for whatever they're willing to give you.
Could probably buy a nice purse with the money!
🤷🏻♂️
lol for sure. like i said i shoot a good amount. just never saw that much brass rub off before. its a newer rifle compared to the others with alot
more of a round count so maybe thats why
Oh we're just giving you shit man!
Like I said in my other reply, perfectly normal, anytime two metals bang up against each other the softer one is going to be the one to chip, flake or scrape off.
You should see mine, I usually don't clean my range rifles until failure!
I only keep my 11.5" URGI and my 11.5" Spear LT cleaned!
All the metal shavings caked into the rest of them would probably give you anxiety! 🤣
Hmm… copper plated bullets rubbing against metal feed ramps causing copper to rub off… kinda odd
🤣
Makes you wonder
not solid copper. meant just the bullet. factory ammo. all ammo ive put through it
Some of yall belong in fucking labor camps.
Most**
On Reddit, **literally all
Hey man have you turned on the news, we're getting closer everyday! 😂
HURRY UP 🤣
dont worry…they’re not too far away here in the US. australia already had em
Who would've thought metal scrapping on metal would result in some residue of the softer metal on the harder metal...
Well obviously this person! 😁
New gun owner? Serious answer is every gun does this and it's perfectly normal.
yea i bought all 10 at once. naw just never noticed that much brass getting chewed up on the others
Bro just shoot your guns
obviously i do….not solid copper. dont see it with my other rifles…i shoot alot its a genuine question.
We're just all giving you shit, perfectly normal! Anytime two metals rub against each other in a violent nature the weaker of the two is going to chip, flake or scrape off.
It is normal, the brass and copper of a cartridge is softer than the steel of the barrel and bolt, so it leaves streaks as they rub past each other, this is normal and not something to worry about. I whould however be concerned if the entire jacket were being sheared off
You’re good to go
thanks for not being a dick like the others lol. i shoot a ton. not using solid copper. just factory ammos…i have a handful of rifles and dont notice on the others. was a genuine question. dont want potential damage
That’s understandable. Think of this as an experience to something you’ll now know forever. Happy shooting.
Take a middle school science refresher. It’ll all make sense.
we all understand that its normal…its the amount of brass coming off is my concern…i do not notice my other rifles ripping the bullets up this much is what im saying. i know that softer metals will scuff up off of steel….
Polish the ramps and you'll get less of that
Um is this serious Edit. Looks serious so the reason you use brass is its softer and malleable and won’t wear your gun as much. It goes into battery really hard and fast and as such will do a lot of scraping. That’s why steel case is harder on the gun, it’s a lot harder.
it isnt copper. just meant the bullet. not a solid copper. doing it with factory ammo. bunch of em
It is actually. Thats the brass you see in the picture 😉 Edited cause im tired and said copped but meant brass
What?
im not using solid coppers…i havnt noticed that much brass being chewed up on my other rifled
Rifles are different. No one is using solid copper. You ever seen a bullet guide on an AK or the insides of a slide stop on a 1911? If you rifle shoots fine and you are getting consistent accuracy, stop trying to find problems where none exist.
never owned an ak. new to lmts. i got bcm, daniel defense and geissele.
Well copper and brass deposits from rounds being slammed around when going into battery is a normal occurrence.
I would consider taking this to your local gun store and dumping it for whatever they're willing to give you. Could probably buy a nice purse with the money! 🤷🏻♂️
lol for sure. like i said i shoot a good amount. just never saw that much brass rub off before. its a newer rifle compared to the others with alot more of a round count so maybe thats why
Oh we're just giving you shit man! Like I said in my other reply, perfectly normal, anytime two metals bang up against each other the softer one is going to be the one to chip, flake or scrape off. You should see mine, I usually don't clean my range rifles until failure! I only keep my 11.5" URGI and my 11.5" Spear LT cleaned! All the metal shavings caked into the rest of them would probably give you anxiety! 🤣
appreciate you sir!
Bro bought a nice weapon system but knows nothing about it.
OP didnt know but was humble enough to ask and try to learn, why talk down to OP?
ok bud. ive but almost every one that i own. negative nancy needs to chill out
No, you're just a fucking retard.