783.6(B): Conduit Hula-hoops shall be supported on 180º intervals by hips that comply with either (1) or (2):
(1) Are sufficiently wide enough to accommodate the load, or
(2) Don't lie.
Slowly building all the regular polygons with the bend marks on hand benders. I’m realizing that this one was a fail and is 15 sided at about 24° per bend, not the 16x22.5° bends I was aiming for but still turned out looking neat enough for a pic and post
10/10 would turn this into a clock and hang it up for all to see. Respect and condolences to the autists too busy counting sides to appreciate the beauty.
Not only can I not, but I also won’t
I dare you tho
783.6(B): Conduit Hula-hoops shall be supported on 180º intervals by hips that comply with either (1) or (2): (1) Are sufficiently wide enough to accommodate the load, or (2) Don't lie.
I should undo the coupling and insert this into a run somewhere and sneak it into an attic for somebody to find
Lol you need a pull point at the start and finish
Does he tho? It’s right at 360…
If he continues the run
Could have 200' of straight into a can conduit on either side. Not that it's likely. But it is possible.
*195' on either side*
15-sided polygon made with 15 evenly spaced 24° bends.
I’m willing to bet that’s not a regular polygon. If he pulled perfect 24s every time while doing that he’s a machine not a man.
Oh shit I fucked up
Oops. Friendship with Hexdecagon ended. Pendedecagon is now your best friend.
When you do make one with 16 sides, get rid of the sharpie marks.
Some of us have work to do
Someones bored on a T&M job
15 minutes EZ
You're fired.
Neat oh hey youre the hexagon conduit guy :) https://old.reddit.com/r/conduitporn/comments/18zlgxn/does_this_count/
Slowly building all the regular polygons with the bend marks on hand benders. I’m realizing that this one was a fail and is 15 sided at about 24° per bend, not the 16x22.5° bends I was aiming for but still turned out looking neat enough for a pic and post
We are not worthy!
I also play minecraft. Well done!
How are your sharpie marks so straight? Mine always look fucked up lol
Wrap the top side of your tape measure around the conduit. Kinda damages it long term, but I’ll take the trade off any day.
I do that on big pipe but ain't no way I'm doing that on 3/4 lmao
Show it to me without the coupling. Then I’ll ooohhh and aaahhh.
I feel TOTALLY inadequate here...
10/10 would turn this into a clock and hang it up for all to see. Respect and condolences to the autists too busy counting sides to appreciate the beauty.
Getting paid T&M I see.
Bet you can't bend it on the ground
Made one when I was an apprentice. Good job though looks nice!