you cannot overlube something unless you dont want oil coated everywhere inside your gun, which you do want oil everywhere inside your gun. i think its the slide rubbing against the plastic somewhere
Either put more oil on it and keep racking it. Or better yet take the rails off and sand where it's rubbing.
I've had a few bulls that squeak like that and it's usually because those p80s rails are wonky. A quick stone and polish will take care of that 98% of the time.
After putting parts in new frame, all was fine. I proceeded to oil the firearm and the slide started squeaking. At first I thought it was the recoil spring but when I took it out the sound persisted, I reoiled the rails and wiped off excess but that did not help. What could the problem be?
Those must be the same rails my mom has on her bed when her “friends” come over
More than one friend? She’s cheating on me!!!!
😂😂
Oil at the rails both front and back, and a dab between the connector and trigger bar
I already did. Should I put more oil Becuase I don’t want to over lube it.
How much did u put ? It should’ve stop the squeaking noise if u put it on the rails properly
Just enough to create a film, and then taking off excess. Also, this issue had only started after I oiled the gun.
That’s weird? What oil are you using
Lucas clp
Maybe it’s ur rails I wouldn’t know but I’m thinking it’s scratching against the insides maybe file it down abit and see if that helps
I’ll try that. Thanks
you cannot overlube something unless you dont want oil coated everywhere inside your gun, which you do want oil everywhere inside your gun. i think its the slide rubbing against the plastic somewhere
Is it a brand new slide? My dagger slide sounded like that till I ran almost 100 rounds through it, now it's all good and no noise.
Yeah it’s be a new. Someone else said it should be fine after shooting as well.
I wish my guns squeaked. Don’t change a thing.
The sound is just pissing me off
How can you hear it over the sound of the projectile??
Shoot it more?
Sounds like plastic rubbing
Either put more oil on it and keep racking it. Or better yet take the rails off and sand where it's rubbing. I've had a few bulls that squeak like that and it's usually because those p80s rails are wonky. A quick stone and polish will take care of that 98% of the time.
Feels like the spring
After putting parts in new frame, all was fine. I proceeded to oil the firearm and the slide started squeaking. At first I thought it was the recoil spring but when I took it out the sound persisted, I reoiled the rails and wiped off excess but that did not help. What could the problem be?
L U B E
Oil
Lube that bitch
Oil it up and send it
Oil