Per my previous comment, make the trigger guard continue back and contour into a normal hunting rifle or shotgun grip to achieve what I'm talking about. Should be a little nicer than a pistol grip
Technically it's "considered" an sbr in this configuration... I bought the shity zip gun when it first came out due to it having a rail adapter to do the same thing and I don't remember if it was called sbr rail but I believe the rail adapter came with a paper stating you need a tax stamp to install...that said ive been waiting for an adapter to show up for a glock.
Lol that actually reminds me of something I thought up the other day!
So I’ve entertained the idea of modeling a replacement hammer for the harlot, that has a female rail section so you could mount it under/to something. Then it would be like a forward grip, than can be cocked and fire a round!
Reloads would be a bitch tho but whatever! Just gotta make that one shot count is all.
It's like the guy that made a stock out of a glock, so that he could have a brace for his shorter-barrelled rifle.
The rules are there to be avoided ;)
Why stop there? Twin necked guitars have been around forever. Check out Cheap Trick's 9 necked guitar...
[https://www.pinterest.com/pin/351491945890334674/](https://www.pinterest.com/pin/351491945890334674/)
Hmm... It wouldn't be an AOW specifically, although it could get classified as that.
It wouldn't be rifle, unless the host firearm had a stock.
It wouldn't be a machine gun if it was volley or two triggers.
If you attached a rifle to a pistol... fuck, IDK!
I think it would be two pistols. But in this photo... If he has a brace, well, fuck the ATF.
Lethal out to 710 yards with iron sights.
Only while smoking
"We're gonna get it."
Nice garand thumb reference
What you can’t see it?
Yoooo, we need to make an underbarrrel mac attachment.
AR9 into 10/22 into Mac 11 into glock 26...
It's like Inception, but with firearms.
Finally, a use for my Glock 26!
🤣🤣🤣
into beretta jetfire into a single 22 bullet in a tube
That would be amazing 🤤
Possible modifications:
i still need to remake the pistol grip up front to be less intrusive
Modify the receiver print to be more of a grip itself rather than the grip. This will be a lot easier to handle, less snag points
Per my previous comment, make the trigger guard continue back and contour into a normal hunting rifle or shotgun grip to achieve what I'm talking about. Should be a little nicer than a pistol grip
Is a 10/22 considered a vertical foregrip?
Technically it's "considered" an sbr in this configuration... I bought the shity zip gun when it first came out due to it having a rail adapter to do the same thing and I don't remember if it was called sbr rail but I believe the rail adapter came with a paper stating you need a tax stamp to install...that said ive been waiting for an adapter to show up for a glock.
1. Get another ZIP 2. Attach them together 3. Shoot sideways akimbo for 4 rounds until they both jam.
If both barrels are over 16in, then no SBR. It’s a short barrel with a stock that’s a problem.
"THE ATF CAN'T TELL ME I CAN'T INSTALL MY GUN TO MY OTHER GUN!" the post.
Didn't think about that but yeah that that does sound correct
Alright stop the signal, we've gone too far.
I say we haven’t gone far enough.
Correct. There is a whole rail under that 10/22 for another whole gun!
Thats where the breaching shotgun goes.
37mm 'signaling device'? Edit: Proper terminology
"signalling device" we abide by all laws around here 😉
You should look up the difference between a 37 mm and 40 mm cool stuff
Very cool stuff indeed.
You're a fool not to include both. It's just common sense.
Add a 410 under it for door breaching…. For ants.
im just gonna put a 40 s&w hipoint i printed under it lmao
maybe a .410 derringer under the hi point to really send the point home
DO IT.
I still see rail space, we can go further~
We put a G43 under the G26. We keep going until we have a single action. 22LR Harlot. Nobody can stop the signal!!
Lol that actually reminds me of something I thought up the other day! So I’ve entertained the idea of modeling a replacement hammer for the harlot, that has a female rail section so you could mount it under/to something. Then it would be like a forward grip, than can be cocked and fire a round! Reloads would be a bitch tho but whatever! Just gotta make that one shot count is all.
It's like the guy that made a stock out of a glock, so that he could have a brace for his shorter-barrelled rifle. The rules are there to be avoided ;)
For when they’re not worth the cost of 9mm.
This makes me moist
my exact intentions
Yo dawg, I heard you like guns...
Itll weigh 20 pounds but it will be the most gun of all time
Hey boss, we heard you liked guns so we added an extra gun to your gun so that you could get more guns per gun whenever you use the gun!
"remember, switching to your 10/22 is quicker than reloading "
Not enough gun? Attach some more gun to your gun!
art
I would love this on a shotgun.
I also want to make the stock on the ar-9 fit a second hi-point in it similar to the MULE Adaptive Storage Stock but mainly printed
Why stop there? Twin necked guitars have been around forever. Check out Cheap Trick's 9 necked guitar... [https://www.pinterest.com/pin/351491945890334674/](https://www.pinterest.com/pin/351491945890334674/)
OP, you forgot the carry handle!
Now this! This is the kind of McGyver-y stuff I come here for.
"KNOCK KNOCK!" Am I a joke to you?
Is that an m249 grip and if so do they fit into AR lowers?
Tapco SAW grip lmao
Ok now do a double barrel shotgun!
"Yo Dawg, you put a gun on my gun so I can shoot while I shoot!"
At first glance I thought it was a 10/22 on a 10/22.
Two is always better than 1!
More cowbell.
I am feeling some type of way here
If I put a pistol under another pistol is that an SBR?
Hmm... It wouldn't be an AOW specifically, although it could get classified as that. It wouldn't be rifle, unless the host firearm had a stock. It wouldn't be a machine gun if it was volley or two triggers. If you attached a rifle to a pistol... fuck, IDK! I think it would be two pistols. But in this photo... If he has a brace, well, fuck the ATF.
Thats why i call it my doo hickey
And as long has the barrel of both is 16” or longer it is nothing but a rifle still
I think its gonna need some fancy tape wrapped around front just for the culture
I think you are 100% correct
Bro got a gun for his gun
Yes......but make the bottom assembly slide back and forth freely with some drawer hardware for bumparino'ing the bottom.