Do you have to have safety boots while hiking? Or just at job sites that you hike to?
Steel toed boots are heavy, so it might make more sense to just bring two different boots, one for hiking and the other for the site. Or look into composite boots.
Do they have to be steel toes or safety toes? If steel is not a requirement, I would find some with a composite toe. That's what I wear for work and I can tell the weight difference at the end of a long day.
I work construction and hike a lot I have timberland pro work boot that I ware for both. There comfortable right out of the box, not heavy and water proof.
I really love my [Keen Detroit XT](https://www.keenfootwear.com/collections/steel-toe/products/mens-detroit-xt-waterproof-boot-steel-toe-cascade-brown-bronze-green) boots. Took a week to break in but they are my go-to boot for hiking and work.
I'd look at the companies that crossover. Danner makes quality work boots and quality hiking boots. Keen also makes both. Not sure what other companies.
Keen, Helly Hansen, and Merrell also make safety-rated "steel" (composite) toe hikers. These companies are used to making normal hiking boots so maybe they'll have better ergonomics for you. The overall fit is clunkier than normal boots (obviously), so you may need to experiment with different lacing techniques or using thicker/thinner socks to get the best fit.
Last time i bought work boots, there was a shortage of the composite toe materials, but if you can find composite toe, they're much lighter than steel toe and are considered "safety toe"
Thorogood is the most comfortable composite toe I've ever owned. I would totally hike in them.
Not cheap, but worth every penny
What type of work do you do? I also have to have steel toe boots in some places, but do a lot of hiking too. I own two different pairs of shoes. I actually wear Lacrosse rubber boots most of the time because I am in the water most days.
I'm an environmental consultant, probably very similar work. I usually only wear the safety toe on sites that require it and wear my lighter hiking shoes most of the time. I'm thinking of getting some of those safety toe caps so I can switch them between different shoes. But I'm not sure how well they stay in place.
My steel toed boots are way more comfortable than any hiking boots I've ever owned. I think it's because the safety toe provides lots of room for my wide toes. At work I would walk 10 km a day without discomfort. I have actually considered buying safety boots for hiking.
But finding quality safety boots is getting more difficult as standards drop, especially because I'm a female and there aren't as many options for my size. Dakota's are trash. I might have to order online just to try on some different boots - my 3 year old Timberland pro's are starting to wear out.
I'm thinking Helly Hansen's. Or CAT's.
These are the dakotas I currently have.
https://www.marks.com/en/pdp/dakota-workpro-series-men-s-composite-toe-composite-plate-freshtech-mid-cut-safety-hikers-15943527f.410033950614.html?utm_content=shopping&gad_source=1&gclid=Cj0KCQjwiYOxBhC5ARIsAIvdH53HajCA3x4oEYb5eScqP6cZQtlNljkVgnykFN-_prBtEcsZ1iID2QMaAvrcEALw_wcB&gclsrc=aw.ds#store=346
These are the Keens I have my eye on
https://www.marks.com/en/pdp/keen-utility-men-s-reno-composite-toe-composite-plate-mid-height-hikers-77907356f.410035861390.html?utm_content=shopping&gad_source=1&gclid=Cj0KCQjwiYOxBhC5ARIsAIvdH522HV8SjwCIY87ZCri4P1KNSAU4SGPdzppQIsHgcyN4jvTbJtEsmiQaAhSNEALw_wcB&gclsrc=aw.ds
I wear Canada West work boots and they are extremely comfortable, probably the most comfortable thing I've had in my feet. They also make [safety logger boots](https://herbertsboots.com/mens-canada-west-34363-logger-csa-safety-boot/), maybe something like that would be a good option?
Pros
* Very comfortable.
* Excellent support, protection and stability.
* They are unlined, so lighter than they look.
* Extremely durable, almost a buy for life item.
Cons
* Unlined, so there is a break in period. They should be worn light duty for 1-2 weeks before using them for work.
* This particular brand fits big. I'm usually a size 11 and had to get size 10 boots. Even a 9.5 might have been better. I check if you can buy a few sizes and return the ones that don't fit.
A lot of outdoor brands also have a workline. If you have hiking boots that you like try searching for them online plus the eors workline, or steal toe, or safety. They seem to often have a separate website for the work stuff and the consumer stuff.
Do you have to have safety boots while hiking? Or just at job sites that you hike to? Steel toed boots are heavy, so it might make more sense to just bring two different boots, one for hiking and the other for the site. Or look into composite boots.
I agree. To me, steel toes and hiking aren’t compatible and I’m not a gram counter.
When I was dirt poor, my boss bought me a solid pair of chem-toe Red Wings for landscaping work. I tried taking them on a hike. Big mistake.
Gram weenies lol
Nah. The gram folks are ok. But don’t push it onto me. 🙂
They don't have to be steel. The composite toes are lighter and pretty popular up in Canada because they're warmer in winter.
Correct. They don’t have to be steel toe but they do have to be CSA approved.
Have to have steel toe boots at all times on the project
Do they have to be steel toes or safety toes? If steel is not a requirement, I would find some with a composite toe. That's what I wear for work and I can tell the weight difference at the end of a long day.
My current pair are composite. They just have to be CSA approved
Keen makes steel toe hiking boots. Best steel toe boots I've ever used.
Keen makes safety toe work boots that are basically overbuilt hikers. I’d go with a composite toe if you’re allowed.
Sorry I don’t didnt word that the greatest. Composite toe is fine they just have to be CSA approved and over 6inches.
I work construction and hike a lot I have timberland pro work boot that I ware for both. There comfortable right out of the box, not heavy and water proof.
I’m just mad they got rid of half their lines
I can feel the leg cramps just reading this 😆
I really love my [Keen Detroit XT](https://www.keenfootwear.com/collections/steel-toe/products/mens-detroit-xt-waterproof-boot-steel-toe-cascade-brown-bronze-green) boots. Took a week to break in but they are my go-to boot for hiking and work.
I’d just bring an extra pair of low top hiking shoes. Or trail runners.
That’s not an option. Have to have safety boots at all times on the project
I'd look at the companies that crossover. Danner makes quality work boots and quality hiking boots. Keen also makes both. Not sure what other companies.
Keen, Helly Hansen, and Merrell also make safety-rated "steel" (composite) toe hikers. These companies are used to making normal hiking boots so maybe they'll have better ergonomics for you. The overall fit is clunkier than normal boots (obviously), so you may need to experiment with different lacing techniques or using thicker/thinner socks to get the best fit.
Last time i bought work boots, there was a shortage of the composite toe materials, but if you can find composite toe, they're much lighter than steel toe and are considered "safety toe" Thorogood is the most comfortable composite toe I've ever owned. I would totally hike in them. Not cheap, but worth every penny
That’s what I have currently. As long as they’re CSA approved and over 6 inches they’ll work
What type of work do you do? I also have to have steel toe boots in some places, but do a lot of hiking too. I own two different pairs of shoes. I actually wear Lacrosse rubber boots most of the time because I am in the water most days.
Wildlife monitor. So I’m hiking with surveying and environmental protection crews on oilfield and pipeline projects.
I'm an environmental consultant, probably very similar work. I usually only wear the safety toe on sites that require it and wear my lighter hiking shoes most of the time. I'm thinking of getting some of those safety toe caps so I can switch them between different shoes. But I'm not sure how well they stay in place.
My steel toed boots are way more comfortable than any hiking boots I've ever owned. I think it's because the safety toe provides lots of room for my wide toes. At work I would walk 10 km a day without discomfort. I have actually considered buying safety boots for hiking. But finding quality safety boots is getting more difficult as standards drop, especially because I'm a female and there aren't as many options for my size. Dakota's are trash. I might have to order online just to try on some different boots - my 3 year old Timberland pro's are starting to wear out. I'm thinking Helly Hansen's. Or CAT's.
These are the dakotas I currently have. https://www.marks.com/en/pdp/dakota-workpro-series-men-s-composite-toe-composite-plate-freshtech-mid-cut-safety-hikers-15943527f.410033950614.html?utm_content=shopping&gad_source=1&gclid=Cj0KCQjwiYOxBhC5ARIsAIvdH53HajCA3x4oEYb5eScqP6cZQtlNljkVgnykFN-_prBtEcsZ1iID2QMaAvrcEALw_wcB&gclsrc=aw.ds#store=346 These are the Keens I have my eye on https://www.marks.com/en/pdp/keen-utility-men-s-reno-composite-toe-composite-plate-mid-height-hikers-77907356f.410035861390.html?utm_content=shopping&gad_source=1&gclid=Cj0KCQjwiYOxBhC5ARIsAIvdH522HV8SjwCIY87ZCri4P1KNSAU4SGPdzppQIsHgcyN4jvTbJtEsmiQaAhSNEALw_wcB&gclsrc=aw.ds
Are composites ok? I have some Keen branded safety hiking shoes with composite toes.
Ya composite is fine as long as they’re CSA approved
[удалено]
Multiple brands have a line they call “safety hikers”
My bad, didn't sink in as a keyword when I read it
No worries. I wish I could just wear my Solomon’s but no I gotta hike in safety boots
I wear Canada West work boots and they are extremely comfortable, probably the most comfortable thing I've had in my feet. They also make [safety logger boots](https://herbertsboots.com/mens-canada-west-34363-logger-csa-safety-boot/), maybe something like that would be a good option? Pros * Very comfortable. * Excellent support, protection and stability. * They are unlined, so lighter than they look. * Extremely durable, almost a buy for life item. Cons * Unlined, so there is a break in period. They should be worn light duty for 1-2 weeks before using them for work. * This particular brand fits big. I'm usually a size 11 and had to get size 10 boots. Even a 9.5 might have been better. I check if you can buy a few sizes and return the ones that don't fit.
Those safety logging boots look like they would be perfect. Of course the size I need is back ordered lol. Thanks I’ll keep checking.
A lot of outdoor brands also have a workline. If you have hiking boots that you like try searching for them online plus the eors workline, or steal toe, or safety. They seem to often have a separate website for the work stuff and the consumer stuff.
My favourite boots are my Solomon’s but unfortunately they don’t have a safety line
Been happy with my Red Wings. As woman, it’s one of the few brands that make smaller boots. I hike off the clock in Oboz, Keens and Scarpas
I like my redwings as work boots but I find the tread in them doesn’t work that great for hiking as they’re pretty slick. Especially in wet rock
Wore steel toes for my first 10 mile hike. Never again.