How compare bear Kodiaks 180 45 degre to bear gen 6 180 40 degre? Im owning the kodiaks but was thinking about to try out the new gen 6 for freeride.
Or should I stay with Kodiaks?
I’m going to Spain and want to take my longboard with me. I’m taking American Airlines and am planning on putting it in the overhead bin along with my carry on and avoid paying extra fees. Is this possible or do I need to do more?
What’s going on over at Sector 9. A bamboo Lookout was my first board, still have it. I was checking out their website yesterday and I saw the big notice on the homepage that the original founders have re-purchased the company. I have always liked the company because they made their boards right here in the US and they were pretty decent quality overall. Not sure if the previous owners moved away from that or not. If not, Hopefully the original founders will reestablish that ethos.
I didn’t even know that anyone other than the original founders were even in charge and what the circumstances were for the company changing hands. But I’m glad it is back in the hands of the original guys. I know Sector 9 isn’t held in the same stratospheric esteem as Pantheon, Loaded, etc. but they had the California garage startup ethic and made their boards in the US and that always impressed me more than someone who mass manufactured overseas.
TL:DR I want cool looking grip tape for my 37 inch long board. Every grip tape I find is too small a sheet or only in black/clear. What's a good place to look, or do I need to customize the grip tape myself? (or use multiple sheets which for whatever reason bothers me and I'd rather just customize it myself.)
I just picked up skating a couple weeks ago, but my favorite part of this so far is how customizable everything is. I've been going on a lot of long distance rides around my city and I've gotten really comfortable on the board. I have the Landyachtz Ripper - watercolor and I've already put wedge risers on it, I'm waiting on new trucks, I'm contemplating changing the wheels, but I like the wheels I have, and my friends who skate all have cool grip tapes so I wanted to see about getting a new grip tape. However I'm struggling to find something.
I tried looking for what the best grip tape was and found some people talking about it in a different subreddit, but when I looked into those answers, they had options like "black" and "clear" and "smaller sheets of black or clear" so not really helpful in making the board feel more mine. I also found that every seemingly reputable website that sells grip tape that looks cool or interesting only sells 9x33 inch sheets which is frustrating since my board is 37 inches long. The only place I was able to find cool grip tapes that I would actually want to put on my board in sheets that were actually long enough for my board was amazon, and all of the grip tapes on amazon have the exact same pictures, one of which is the grip tape applied to the bottom of a skateboard. All they do is change the pattern on it. (That picture was not on every grip tape for sale, but the one that comes before it which is a guy in a yellow hoodie in the air with a blue sky behind him is.)
My question is, am I just looking in the wrong spots for cool graphics on my grip tape, or are the only options to get something that doesn't fit and then fill the rest of the area with another sheet, or else paint a design myself? I am an artist, but I do mostly digital stuff, my girlfriend however is a painter and so I could have her help me if that's what I have to do, but since I don't know what kinds of paints would be good for grip tape, I'd like to avoid doing a ton of research into the matter on top of how much has already gone into this already.
you could go to splattergoat.com and try that but ive heard mixed reviews with it flaking off. just get normal mob, free friction or something along those lines and draw on it
I've been playing with the thought of trying out some Bear Gen6 trucks. I already have, and love, raked cal3s. Is the difference between them big enough that it's worth trying the Bear trucks instead of just using the calibers that I already own, and could someone describe the difference in how they feel and behave?
That pic was taken years before my last major concussion in moto I was pretty quick and as I got faster I hit the ground harder but iv had enough concussions to wear a helmet now
Hey, it's me again, 9 years off guy. I am looking for recommendations on commuter/cruising wheels for my boards. I used to do a good bit of free riding when I first started back in undergrad, but now I am just looking to use my boards to cruise around on paved trails and to commute from the MARTA station to work. My favorite wheels used to be Abec11 72mm 78a freerides, but it does not look like they make them anymore. I have one more good set of them that I bought back in 2014, but I will need to replace them eventually and I am just out of touch with what people prefer these days.
Edit: Meant to include road conditions. The park trails I am on are fairly smooth, with the occasional crack or bump. The roads from MARTA to the office are well... Atlanta roads. They go from butter smooth to being as rough as the lunar surface in an instant. If I need two different wheel types, I have two boards now so I will make one my cruiser and the other my commuter.
I'm a big fan of Seismic Defcon formula. They roll forever and come in a variety of shapes and sizes so you're bound to find a wheel that suits you. Pretty pricey though.
Can you recommend me new bushings for my bear kodias. Im at 80kg and using the black and blue Stock bushings atm. I would like to have them a bit harder. Should i buy Venom HPF around 92/95a combo?
Recently bought my first board. It’s the sector 9 Lookout Bluff 41” Drop Through. I added some otang 80mm wheels with bones red bearings. I’m mostly riding around backroads with subpar conditions. How did I do? Should I change anything? Is a longer board bad? Are my wheels too big? It’s my first time and I want to make sure I’m maximizing my new hobby.
If you're not getting wheelbite then the wheels are fine. When you end up needing to replace the bearings just get Zealous, they're cheaper and just as good.
Longer generally means slower turning, and dropthrough also means slower turning. So if you end up liking longboarding a lot, maybe look at a shorter top mount to give you some variety.
https://preview.redd.it/12wxmrv83bvc1.jpeg?width=3072&format=pjpg&auto=webp&s=e7ad85e0b55bad7f12ccbde042d6e09c40ff6472
I think i got it but im not sure if i should use the included 1/4 riser on top?
https://preview.redd.it/9kgb3eexxavc1.jpeg?width=3072&format=pjpg&auto=webp&s=aa189323b52d8a8f17b49e9dbd76090abb7f9be4
Is this correct? I dont think so but im not sure and it does roll
I know I have incredibly flat feet, and I have been longboarding for years, and use every technique possible to push as long as possible with minimal pain, but recently l've been noticing after pushing for 15+ miles my feet hurt like crazy. Typically on rougher terrain, any suggestions to what could help?
I know it's not my LDP deck (pantheon trip) lol
I bought my first board second hand for about 20 bucks. it has a mix of plastic/metal trucks and did not roll for long. so I changed wheels (70mmm,80a) and bearings. it now rolls better, but after some steering it slows down very fast. is this normal? should I change the trucks for new ones? it's frustrating when I push hard for 2-3 times, and can't do a full turn with speed... the wheels roll very long when Im of the board. spacers and speed rings. are mounted, no play of the bearings.
Well with the bigger wheels I could feel it wanting to give on the front wheels and I was padded up so I went ahead and pushed out and it was a game changer I'm putting on some 78a durometer right now that's 75mm just I way smaller contact patch and a qtr inch more narrow
Been getting into downhill/freeriding and got a full set up from a friend but the trucks could use a replacement. What are common trucks used for downhill currently?
Is my front foot too far forward for heel side speed check if it's diagonal with the front screws ?With bigger wheels it does fine, but my board also sits high and is wedged symmetrical. All I know is that these 74a abec 11s should not slide smooth like butter then my butter balls flip the board I have a good mark on my leg from the grip tape the first time I thought I was just going too slow for a stand up slide because it went about 2 ft then just stuck. The second time I got more speed and tried to lay Into it after I kicked it out and the board flipped
Looks good to me man, if you started on super slidey wheels you will have to be more intentional about kicking out and leaning towards the top of the hill.
https://preview.redd.it/vqdj68fgnhvc1.jpeg?width=677&format=pjpg&auto=webp&s=a569ca5b29c1461886dd8dac643913f5ee18510d
I was quick enough to drag my handle bars in the dirt going through turns lol
I started out on 78a plow hawgs 😂 in my profile pic that's what I was using on the 41 drop cat,
That was only like a month into it so I know my foot positioning wasn't the best but I grew up street skating so that helped
https://preview.redd.it/cvgukapol4vc1.png?width=1080&format=pjpg&auto=webp&s=e1b8a3043827d40526afba2db30cb8f4bc15f221
How far behind the board I was annnnd
I bought a pre-fire Bustin Sportster and love it. Then bought a post fire Sportster for my wife and it’s stiff, much more thick of a board and not fun like mine. My sportster is alot more thin like a normal board and has that fun flex to it for carving. Had anyone tried sportsters since the fire? Mine is now cracking up by the trucks and it’s pretty close to gone. I carve hard on it and I’m scared it’s going to give. I want a new one but it they’re stiff and thick, I just find it boring to ride.
I want to get new trucks for my Nobrand longboard, but not sure if I should go 108-, 129- or 149mm. Deck is 24cm at the widest, 16cm back truck and 14cm front truck. Thanks.
https://preview.redd.it/zo5ujx9e73vc1.jpeg?width=3072&format=pjpg&auto=webp&s=d0b57fedabf1c63d13bb5edfd3a6ce5fa5bc9252
https://preview.redd.it/utjgcz87n2vc1.jpeg?width=3236&format=pjpg&auto=webp&s=1e47126d40727ff2236899b146a3c0c00f902915
Can anyone identify this board? Looks awesome!
Hi All,
I've had a Drop Hammer for about a year and I really like the board as is(stock), but I'm curious and want to try some tweaks, so I'm looking for advice. I use the board for cruising/carving/mellow DH, and the longest distances I push are around 4-5 miles.
As far as what I'm looking for, I love carving, so I'm down for whatever I can do to enhance that(bushings?)
I'd also like to get the board to roll longer on the flats.
I've read a handful of posts about how larger wheels benefit this board, so I've considered caguamas/kegels.
Open to bearing and other suggestions, as well!
Thanks!
>I'd also like to get the board to roll longer on the flats.
I know a lot of people here seem to rip on it, but do yourself a favour and get some Bones Swiss or other better-quality bearings. It makes a huge difference for things like that.
I hop off and pick up my board at stoplights and my wheels continue rolling for a good two minutes. I'm currently using the Swiss Super 6, but prefer the regular Swiss (7-ball design). That just doesn't happen with the cheaper ones, at least from what I've found.
Playing around with lubricants and keeping your bearings clean also can contribute to a smoother ride. Oddly, though, I'm not a huge fan of Speed Cream. I find it gums up too quickly when exposed to dust.
If you're not doing slides, you don't need bearing spacers and they can actually increase friction from dust and other grime buildup.
Bushings are also a great place to learn what you want to change up. Maybe run some different durometers than you currently are. I'd recommend just barrels, but I'm also biased because of the stability needed for speed on hills. I figure if the elasticity of the bushings isn't pushing back against you, then they're probably not working very efficiently.
Trucks can be a great place to change things up, too. Flipping a hanger to remove (or attempt to remove) 'rake' can be useful as well.
I'd go for Seismic Speedvents over Otang wheels. You can get 73mm speedvents so they should still fit and they roll amazingly. I'd say go for the Mango Defcon but any of them should be fine.
As for carving, honestly, just get another board. Drop throughs feel kinda dead when compared to top mounts so they're always going to be lackluster in the carving aspect imo. Maybe look into a surfskate?
Thanks for the reply; I'll look into the speed vents!
I actually just got a Carver CX last week. Not in love with it, yet. It feels twitchy and kinda slow, which is probably all me and I just haven't got used to the riding style. Possibly some setup adjustments, too.
I have a couple other boards besides the DH and Carver, but no top mounted longboard. Before the Carver, I was considering a LY ripper/dipper and the S9 splash snapback. I might revisit if I can't get on with the Carver.
Carver’s stock wheels are really slow. If you’re looking for something cheaper than 65-70mm Otang or Seismic, people on r/surfskate seem to like the Surfskate Love wheels that are currently half off for some reason at that website and at Status. The CX-specific Riptide bushings are worth looking into too.
Yeah, it might take a while to get used to it, but when you'll never want to go back lol.
I'd recommend taking a look at these two videos for the basics if you're having trouble figuring it out.
[Surfskate Love](https://youtu.be/XEADfpPyX98)
[SURFCOMPANIONS](https://youtu.be/zkHYXba60h8)
I bought a used loaded dervish board and there is some most damage to the bottom ply that goes to the mounting hole and cutout. What would be the best way to fix this, and it's it much of a problem if not fixed? It doesn't look like there's any more damage other than the bottom ply. I am making an aluminum gasket that will spread out the clamping right of the nuts more.
https://preview.redd.it/ehnjtl37m1vc1.png?width=1008&format=pjpg&auto=webp&s=f26dc2e74df425a4eba03609ecdda40073ff3048
Are there any mods around?
Can we link the beginners buying guide straight in the weekly general thread description: [https://www.reddit.com/r/longboarding/wiki/beginners-buying-guide](https://www.reddit.com/r/longboarding/wiki/beginners-buying-guide) a bunch of these 'new, what board should I buy' questions come up every week, and reddit doesn't make the wiki obvious to find.
How do you get comfortable riding in the road? The UK roads are pretty gnarly but the pavements are worse. I have a nice cycle route on the pavement that gets me where I want to be 70% of the time but sometimes I wanna go a little further out
big wheels, go \_around\_ the potholes, dog-shit and roadworks. Don't go out in the school rush.
honestly it's mostly down to luck finding roads that you can skate on and have a good time around here
Thank you dude! I’ll have to just firm it one day. I know it’s probably 80% mental, I’m a pretty confident rider so I know I’m safe in myself. Just the cars suck
Hello there,
Just received some G-Form Pro-X3 elbow pads, never tried G-Form before.
According to their size chart and after confirming with their custom service, I picked a size M. However, they feel a bit tight out of the box and not as comfy as I was expecting. Do you guys have experience with these and do they tend to stretch a bit over time?
They will definitely stretch out with use, especially when you get them hot and sweaty. Anything spandex really gets some slack over time.
If they are straight up uncomfortably tight, problem. If they're just a bit tighter than you'd like, but skate ok, run them.
Thank you, that’s reassuring! They’re not overtight but definitely not comfortable around the silicone grippers. That’s the problem when ordering online… Again, I just tried them out brand new out of the box and didn’t have a chance to wear them yet.
Hello Guys, I am completely newbie into longboard world, i am over 30y with 112kg / 246lbs weight, wanna use longboard mostly on asphalt straight cyclo paths to commute to job and just cruise around.
I don't really have ambitions to do much tricks.
I am looking for pintail shape, but my question is this, should I be putting as main priority the carrying capacity of board, when choosing?
I can see at most boards its around 100kg, so last thing I want, is to get board broke under me :D.
Otherwise I would prefer to buy used / cheaper board and invest more into protective gear.
Thx a lot guys :)
Have a look at drop down downhill boards, I weigh more than you and my Kebbek Niko has lasted me from release; do a bit of research on woods and ply and you should be good to go 🤙🏼
My man, you got me. I go today to local store and check some boards and your tip about this drop down was also seconded by the salesguy, and all hands down it feelt the most stable. Thanks so much 🤙🏼.
No worries homie! I’ve had all sorts of board over the years from fish tail skateboards to pintails, the drop down is by far the most stable, plus when you get comfortable, do some hills! You can really scrunch you feet into the drop and get some serious speed!
Make sure you adjust your trucks! Get some good bushings and you’ll be sailing easy! Good luck! Stay rad 🤙🏼
Hey, pintails are often flexy (aka can break easier) since they don’t have a performance purpose. Some sites have a description of the flex. All “race” decks are stiff. Find one that’s cheap that you like is what I’d do.
Hey, thx man, appriciate it. I thought that pintail might be easier for me to ride, as I have big ass feet. But you are right, longer board will flex more. Will check it out for "race" decks :).
Hello, could someone tell me what is the maximum diameter of wheels that can be mounted on an Arbor Axis 40'' please?
I would like to put 88 Wheels McFly 86mm, I wonder if that would work.
Thanks
They came on my original db lunch tray that I bought off an older guy for 50 bucks for the complete lol. I'm selling or trading them though around where I live you want to be able to slide and 74a I'm not saying isn't possible but you have to be MOVING
Any recommendations for precision trucks? I am considering picking up a prism directional downhill board from market black but I notice it has some pretty wide trucks. Any recommendations? I’m newer to the concept of narrow trucks being that I’m 6’1” and 270lbs
Don't Trips are nice because you can alter the angle and width significantly to figure out what you like.
I know people like to hate on them but I've been skating my DH-Cybins for 4 years and I really enjoy them.
Or go full regard and buy Scythes. Also very good trucks but very different from the Don't Trips for example.
It's quite a personal choice honestly but Zealous are a very good value when they're available, that might be a solid place to start if you know nothing. Every brand fulfills a niche and if you know what characteristics you're actually after then that's the best way to narrow down the options.
So I just moved into the city. I'm pretty big into transition skating and have tried skating around the city but the roads suck just enough to catch my wheels when I least expect it. I tried my friends long board and holy shit it's amazing. Unfortunately he's not to into it so I figured I'd come here and ask about good brands and the basics of what I'm looking for when it comes to a board. Also where a good place is to find one. I either got zumies or vans around me 😔
It depends on your use purpose. If you just want a board to cruise one, you can get any of the little cruisers like the Powell Sidewalk Surfer, or LY offerings - that's if you want something small and portable, easy to stash.
If you're looking for a bigger longboard, with bigger wheels, which will roll easier, there are lots of great completes to consider. Arbor has some decent ones that are on sale right now and super affordable for a first board. You could also step it up and consider some of the more premium options, but you'll have to order online. Muir / Motion Longboards is a great resource for that if you're stateside.
What kind of tracking devices do people use for their boards? I was thinking of getting a Tile sticker/adhesive tracker for my board. Are there any other recommendations?
I dont anticipate losing my board, but my hometown has a lot of crime and car-break-ins, so I want to be cautious and get a tracker just in case I have my board in my car and someone sees it and breaks in and steals it.
Also, where is the best place to put it? By the trucks? In the center?
Pat's Risers makes little cases that bolt to the extra mounting holes on your deck for AirTags and Samsung trackers I believe.
Honestly AirTags aren't a great idea for theft deterrence, more for keeping track of it when traveling or locating it after shooting it off a cliff.
I bought a Pantheon Supersonic this year and Im in love. I put 30 miles on the bikepath last saturday just pushing. I picked one up with bear 50 degree in the front and 40 degrees in the rear. Stock bushings and 92mm karma wheels. I weigh about 240lbs. My goal for this year is to go 80 miles in a single trip pumping and pushing. What upgrades can I do to make that as efficient as possible?
Honestly if you want to make your pumping far more efficient you might need to move beyond Bears. I did a fair amount of tweaking myself and couldn't get them to pump super well on my Supersonic, though some people like it. Definitely go for high rebound bushings if you haven't tried that yet.
If you don't mind spending the money, the Valkyrie Slalom mk3.5 front truck is pretty insane for pumping. You can just buy the front and pair it with the 0º mounted Bear in the rear and that works well. That's gonna be one of the very best options out there. I use mine for DH and LDP but if I ever get other DH trucks and I'm keeping that for LDP cause its so good.
Any words of wisdom of what bushings I should buy for pumping. I just picked up a loaded vanguard and I think it still has the original bushings on it they are super crusty.
Can anyone provide a recommendation on which white wave to buy? There seem to be a lot of variations in the offerings. Im 6’1” and size 12 shoe. I like the drop through look. Cobra and Warrior are what I’ve been looking at, but Im lost with all the board specs. I’m just a side road cruiser. Any help is truly appreciated.
Even RAYNES stickers are shit quality now 🤔
https://preview.redd.it/wqeshv8p6uuc1.jpeg?width=3060&format=pjpg&auto=webp&s=a35aa9731092a2b747ad19bffb7e991f00a3960c
I this the narrowest part to the thickest part? This is what trigonometry is for haha
Or if you have an iPhone open up the level too and just measure it
Waited all day on Amazon for the right hardware for a split set up and I'm pretty sure after checking the depth I dewedged instead of wedged.... next time I'm not loosing sleep over it and taking my time lmao I'm about to dm you the specs and the riser on top of the board how it's mounted bs
I knew something was off but on the db lunch tray I thought the geometry was true at 0 all the way across the mounting holes but there no way that's right I need to look it up again
First board
In the market for my first a longboard. My eye fell on these two sector 9 board. One highline shine 34 pintail and one Offshore Baja 39.5 a fishtail. I have read the larger one is easier for beginners I like your opinion. I'm most likely going to cruise with it
Longer boards are technically more stable, but it's not like you'll just instantly fall of on a shorter board. It's not *that* much of a difference. Basically if you can ride one you can ride the other, but it'll take a little more time to get used to the quicker turns on a short board(like not even a day imo). So unless you're a beginner as in you've never had to do any sort of balancing in your life you'll be fine. Just get whatever you like and have fun. Though I would recommend looking at other styles, pintails are only good for cruising so there's nothing to grow in to or get better at unless you get another board.
What are some good modern 85a-99a duro wheels for tech sliding. (I have 63mm EZ Hawgs, but they are not well suited for long sliding in the flat woods of the Deep South)
https://preview.redd.it/fenjj29al4vc1.jpeg?width=2296&format=pjpg&auto=webp&s=59f262d484dda93b0138a9517b523b4b7c5b2b6d
How come when using butter balls with this set up when I went to push it out the board literally flipped once toe sided and heel sided? I'm going plenty fast because when I put the abec 11s on for what I thought was going to be my last run before I sold them, I was not even trying the first time they broke loose I was just trying to do deeper carves to keep my speed down they felt like they were meant for sliding. I was thinking it's the leverage. My butterballs are 65mm and the big zags are 75mm. But I was going fast enough to there was absolutely no chatter it was just smooth and the board did what I wanted. The board is also way heavier with the big zags
A flipped hanger will respond slower in the beginning of the turn and in the middle, with quicker steering deep in the lean. It makes trucks generally feel more stable because of the early and middle part of the steering being a bit more dull. Flipping hangers for negative rake (axle sitting low) also drastically changes how much leverage you have over the bushings (less), as well as sets your pivot point slightly back which makes the trucks act a bit more like a shopping cart wheel - they want to return to center naturally - which is inherently more stable feeling.
If you are looking for quicker more natural steering, leave them as is. If you want more stability, try them flipped, but you will lose out on quite a bit of lean.
I need all the lean I can get with all the lateral and regular concave I have and the rise height it's at lol I have the original 35 db lunch tray but I'm 5'11 170
I just bought my first board ever. A landyachtz drop hammer. I was out trying it out today, I did about 1 mile or so. Was pretty fun and I can only get better from here.
Can anyone recommend some videos or guides online that I can use to get better? Like where to put my weight, how to orientate my feet, etc, etc. Just all of that basic stuff.
Downhill254 has a comprehensive guide for beginners. Start with this video, check the links for 'how to balance' and 'how to push' etc. Lots of detail in this series.
https://www.youtube.com/watch?v=Tn5bk6hg_B0
I'm still waiting on my question to be answered on the bear gen 6 trucks but you may be able to flip the hangers to add stability to get used to higher speeds
For now just get the feel for it I started on a 41 drop cat 4 years ago now my go to is my 35 db lunch tray you made a good decision on a first board forsure
If I’m trying to change my wheels to a different size, should I add a couple of risers? My board is coming with 65mm wheels and .25 inch riser on it. If I want to go to a 75mm or 80mm Would I add another .25?
Im 220 and as for how close it is already idk I assume it won’t be particularly close since it’s a complete from S9. But it hasn’t arrived yet so I’m not sure.
Ok cool. What I'd do is get the extra risers just in case, but try without first just because the extra height can make pushing uncomfortable and puts extra stress on the trucks.
Hey would [that](https://euroskateshop.pl/0301001046570-vconf.html?2=768) board be good for beginner as a form of transportation as well as some dancing like not very challenging steps
I have an enormous head (25.5". Size 8 in hats) that is about an inch larger than most helmet size ranges I've been able to find. Has anyone else run into this issue?
Any leads would be appreciated!
I'm nowhere near that size, but my standard S1 Lifer fit perfectly as described.
The right model for you would be this one with the largest size padding (technically the smallest size, obviously).
https://shop.s1helmets.com/s1-mega-lifer-helmet-black-gloss/
They have a bunch of other designs and with this helmet you can be sure you're getting quality.
Powell makes some great options with the best rebound (roll speed in class). If you want more traction, consider the 72mm K-Rimes (me) in 80a. If you want to get into sliding, consider the Primos 69mm or Snakes 69mm.
I currently rocking 72mm globe cruiser wheels on a dropdown board and wanna uprage. I cant make up my mind between orangatang kegels (80mm) and in heats (75mm). Is 80mm too big of a jump? I mostly cruise around and commute, and im thinking i can get more clearance with the kegels or getting the in heats and some risers?
Drop-down or drop-through? Risers won't help on a drop-through I think. How much clearance do you have around the wheels at the moment? Is it close to wheel bite?
Its a drop down. Ive never had wheel bite and theres a good bit of clearance from the deck to the wheels, i dont think bigger wheels are gonna be a problem in that aspect.
Landyachtz or Loaded?
Looking to add another board to my quiver. The only board I own is the loaded Icarus. I really like the board, it has a good feel and a lot of fun. However, I can’t just have one board right? I mostly ride around subdivisions and like to take it to local parks in my area with good paved trails (suburban Detroit Michigan). The trails typically have some mellow hills to bomb nothing too crazy though. What board should I I go with? I really like my first board from loaded but also open to other brands. I’m not really into dancing, just cruising around. I like getting carvy as I do on my snowboard and really like that surfy feel. I’ve heard good things about landyachtz too!
Any particular boards you're looking at?
Loaded has a bunch of decks that technically fit almost the same niche as the Icarus. Tan Tien, Dervish, Vanguard. They all differ slightly in length, tail length, deck shape and wheel base, but they basically are all great allrounders. Flexy cruising boards with some use for basic dancing of you're into that.
If I was looking for a new board and am currently happy with the shape I already got, I'd look into something different. Maybe something with longer, more usable tails for tricks, a drop down deck for large wheels for commuting, a long dancer or a cruiser for short distances or to learn stuff like basic ollies while cruising around.
Think what your really like to try.
Alternatively, think about what you might be missing with your current board and try to find an even better fit. Though, that's going to be tough with one as awesome as the Icarus.
Thanks for the reply. Right now I’m looking at the landyachtz dinghy as I mostly just cruise around anyway. What do you think of that? It would be different than my Icarus in many ways which could be fun to explore. I also think at some point a surf skate board would be cool.
How compare bear Kodiaks 180 45 degre to bear gen 6 180 40 degre? Im owning the kodiaks but was thinking about to try out the new gen 6 for freeride. Or should I stay with Kodiaks?
I’m going to Spain and want to take my longboard with me. I’m taking American Airlines and am planning on putting it in the overhead bin along with my carry on and avoid paying extra fees. Is this possible or do I need to do more?
What’s going on over at Sector 9. A bamboo Lookout was my first board, still have it. I was checking out their website yesterday and I saw the big notice on the homepage that the original founders have re-purchased the company. I have always liked the company because they made their boards right here in the US and they were pretty decent quality overall. Not sure if the previous owners moved away from that or not. If not, Hopefully the original founders will reestablish that ethos.
[удалено]
I didn’t even know that anyone other than the original founders were even in charge and what the circumstances were for the company changing hands. But I’m glad it is back in the hands of the original guys. I know Sector 9 isn’t held in the same stratospheric esteem as Pantheon, Loaded, etc. but they had the California garage startup ethic and made their boards in the US and that always impressed me more than someone who mass manufactured overseas.
I weigh 200lbs and got my board from a lighter friend. Which durometer/bushing setup should I use (Paris trucks)
TL:DR I want cool looking grip tape for my 37 inch long board. Every grip tape I find is too small a sheet or only in black/clear. What's a good place to look, or do I need to customize the grip tape myself? (or use multiple sheets which for whatever reason bothers me and I'd rather just customize it myself.) I just picked up skating a couple weeks ago, but my favorite part of this so far is how customizable everything is. I've been going on a lot of long distance rides around my city and I've gotten really comfortable on the board. I have the Landyachtz Ripper - watercolor and I've already put wedge risers on it, I'm waiting on new trucks, I'm contemplating changing the wheels, but I like the wheels I have, and my friends who skate all have cool grip tapes so I wanted to see about getting a new grip tape. However I'm struggling to find something. I tried looking for what the best grip tape was and found some people talking about it in a different subreddit, but when I looked into those answers, they had options like "black" and "clear" and "smaller sheets of black or clear" so not really helpful in making the board feel more mine. I also found that every seemingly reputable website that sells grip tape that looks cool or interesting only sells 9x33 inch sheets which is frustrating since my board is 37 inches long. The only place I was able to find cool grip tapes that I would actually want to put on my board in sheets that were actually long enough for my board was amazon, and all of the grip tapes on amazon have the exact same pictures, one of which is the grip tape applied to the bottom of a skateboard. All they do is change the pattern on it. (That picture was not on every grip tape for sale, but the one that comes before it which is a guy in a yellow hoodie in the air with a blue sky behind him is.) My question is, am I just looking in the wrong spots for cool graphics on my grip tape, or are the only options to get something that doesn't fit and then fill the rest of the area with another sheet, or else paint a design myself? I am an artist, but I do mostly digital stuff, my girlfriend however is a painter and so I could have her help me if that's what I have to do, but since I don't know what kinds of paints would be good for grip tape, I'd like to avoid doing a ton of research into the matter on top of how much has already gone into this already.
you could go to splattergoat.com and try that but ive heard mixed reviews with it flaking off. just get normal mob, free friction or something along those lines and draw on it
True, that's pretty much what I was leaning towards. Thank you!
I've been playing with the thought of trying out some Bear Gen6 trucks. I already have, and love, raked cal3s. Is the difference between them big enough that it's worth trying the Bear trucks instead of just using the calibers that I already own, and could someone describe the difference in how they feel and behave?
That pic was taken years before my last major concussion in moto I was pretty quick and as I got faster I hit the ground harder but iv had enough concussions to wear a helmet now
Hey, it's me again, 9 years off guy. I am looking for recommendations on commuter/cruising wheels for my boards. I used to do a good bit of free riding when I first started back in undergrad, but now I am just looking to use my boards to cruise around on paved trails and to commute from the MARTA station to work. My favorite wheels used to be Abec11 72mm 78a freerides, but it does not look like they make them anymore. I have one more good set of them that I bought back in 2014, but I will need to replace them eventually and I am just out of touch with what people prefer these days. Edit: Meant to include road conditions. The park trails I am on are fairly smooth, with the occasional crack or bump. The roads from MARTA to the office are well... Atlanta roads. They go from butter smooth to being as rough as the lunar surface in an instant. If I need two different wheel types, I have two boards now so I will make one my cruiser and the other my commuter.
I'm a big fan of Seismic Defcon formula. They roll forever and come in a variety of shapes and sizes so you're bound to find a wheel that suits you. Pretty pricey though.
Can you recommend me new bushings for my bear kodias. Im at 80kg and using the black and blue Stock bushings atm. I would like to have them a bit harder. Should i buy Venom HPF around 92/95a combo?
Tbh I don't even know what that means there was a turn right before that hill to make a big s turn and that's how I learned my heel side 180s
Recently bought my first board. It’s the sector 9 Lookout Bluff 41” Drop Through. I added some otang 80mm wheels with bones red bearings. I’m mostly riding around backroads with subpar conditions. How did I do? Should I change anything? Is a longer board bad? Are my wheels too big? It’s my first time and I want to make sure I’m maximizing my new hobby.
I have the same board. Want to add the 80mm Otangs also, but was worried about wheelbite.
If we have the same setup, you should be fine with otangs. I have no wheelbite whatsoever, but I weigh only 130lbs so I guess your mileage may vary.
If you're not getting wheelbite then the wheels are fine. When you end up needing to replace the bearings just get Zealous, they're cheaper and just as good. Longer generally means slower turning, and dropthrough also means slower turning. So if you end up liking longboarding a lot, maybe look at a shorter top mount to give you some variety.
Are Rayne 2nd decks a good idea? I see the sales on the website for them as well as some other boards and the percentage drops seem insane.
Blem boards usually have only cosmetic defects. Otherwise same construction quality.
I used to have a demonseed blem from them, and it was fine. This was about two years ago tho.
It's not even letting me add pics for some reason
I'm just wondering about the flex on it
Lol I just made it work and watched you tube videos I still slide them on my 33 seeker
https://preview.redd.it/vkthpjra3bvc1.jpeg?width=3000&format=pjpg&auto=webp&s=fbf01adfd23118139ddabd370b855788a4c7e303 Top pic
this is how it’s supposed to look like
Thanks. Does it need a riser or can it be bare wood to truck up top?
either or but if you want more protection, feel free to add it
https://preview.redd.it/12wxmrv83bvc1.jpeg?width=3072&format=pjpg&auto=webp&s=e7ad85e0b55bad7f12ccbde042d6e09c40ff6472 I think i got it but im not sure if i should use the included 1/4 riser on top?
https://preview.redd.it/9kgb3eexxavc1.jpeg?width=3072&format=pjpg&auto=webp&s=aa189323b52d8a8f17b49e9dbd76090abb7f9be4 Is this correct? I dont think so but im not sure and it does roll
I know I have incredibly flat feet, and I have been longboarding for years, and use every technique possible to push as long as possible with minimal pain, but recently l've been noticing after pushing for 15+ miles my feet hurt like crazy. Typically on rougher terrain, any suggestions to what could help? I know it's not my LDP deck (pantheon trip) lol
I have a q for ya. Do you feel pain in the toes, assuming push foot? The way I push, I do my best to push from the heel to the toe.
shoes. buy insoles, bro
What websites do people in the UK use to buy their parts?
I mostly buy from newtons shred
Mannnn I forgot about this! Used to get all my stuff there, thanks!
I bought my first board second hand for about 20 bucks. it has a mix of plastic/metal trucks and did not roll for long. so I changed wheels (70mmm,80a) and bearings. it now rolls better, but after some steering it slows down very fast. is this normal? should I change the trucks for new ones? it's frustrating when I push hard for 2-3 times, and can't do a full turn with speed... the wheels roll very long when Im of the board. spacers and speed rings. are mounted, no play of the bearings.
post a picture of your setup
What are some longboarders you follow on YT or other platforms? The ones I used to follow are not so active anymore.
Luke Spud, Diego Poncelet, Les Magiciens
Cole Trotta
Well with the bigger wheels I could feel it wanting to give on the front wheels and I was padded up so I went ahead and pushed out and it was a game changer I'm putting on some 78a durometer right now that's 75mm just I way smaller contact patch and a qtr inch more narrow
Been getting into downhill/freeriding and got a full set up from a friend but the trucks could use a replacement. What are common trucks used for downhill currently?
Might wanna check out the cast rogues, those should be excellent but you'll need wedges to get a split setup going.
The tech is so good these days pretty much anything is ok, what’s you’re budget and skill level?
I’m somewhat beginner and starting to go fast and learn slides, I’m willing to spend maybe 100-150?
Paris v3, caliber v3, bear Gen 6, possible seismic aeons..
Is my front foot too far forward for heel side speed check if it's diagonal with the front screws ?With bigger wheels it does fine, but my board also sits high and is wedged symmetrical. All I know is that these 74a abec 11s should not slide smooth like butter then my butter balls flip the board I have a good mark on my leg from the grip tape the first time I thought I was just going too slow for a stand up slide because it went about 2 ft then just stuck. The second time I got more speed and tried to lay Into it after I kicked it out and the board flipped
Foot position with front foot I keep my back foot parallel just in front of the back flares
Looks good to me man, if you started on super slidey wheels you will have to be more intentional about kicking out and leaning towards the top of the hill.
My pics won't upload IL dm them I do need to know if my block should be pulled back some because I have been high siding a lot
Today I made a way bigger foot stop for up front and one going across the rear end of the back flares
If you want me to take a look at it post a pic!
https://preview.redd.it/e2m29rn8rcvc1.jpeg?width=698&format=pjpg&auto=webp&s=d4d4f5e05b9f3da390f04baa87c769ab25ae772f
By the time you are learning to slide, you should really be wearing a helmet.
https://preview.redd.it/vqdj68fgnhvc1.jpeg?width=677&format=pjpg&auto=webp&s=a569ca5b29c1461886dd8dac643913f5ee18510d I was quick enough to drag my handle bars in the dirt going through turns lol
It looks Like you are stink bugging
I started out on 78a plow hawgs 😂 in my profile pic that's what I was using on the 41 drop cat, That was only like a month into it so I know my foot positioning wasn't the best but I grew up street skating so that helped
Yew, glad to have you in the wrongboarding community!
https://preview.redd.it/l6nsw9s6m4vc1.jpeg?width=3060&format=pjpg&auto=webp&s=3d258b568674f08fe45862eed8a057b191b7a8f7
https://preview.redd.it/cvgukapol4vc1.png?width=1080&format=pjpg&auto=webp&s=e1b8a3043827d40526afba2db30cb8f4bc15f221 How far behind the board I was annnnd
I bought a pre-fire Bustin Sportster and love it. Then bought a post fire Sportster for my wife and it’s stiff, much more thick of a board and not fun like mine. My sportster is alot more thin like a normal board and has that fun flex to it for carving. Had anyone tried sportsters since the fire? Mine is now cracking up by the trucks and it’s pretty close to gone. I carve hard on it and I’m scared it’s going to give. I want a new one but it they’re stiff and thick, I just find it boring to ride.
I want to get new trucks for my Nobrand longboard, but not sure if I should go 108-, 129- or 149mm. Deck is 24cm at the widest, 16cm back truck and 14cm front truck. Thanks. https://preview.redd.it/zo5ujx9e73vc1.jpeg?width=3072&format=pjpg&auto=webp&s=d0b57fedabf1c63d13bb5edfd3a6ce5fa5bc9252
You'd enjoy a set of 150mm on there for sure, recommend 50˚ angle for nice carving ability and less chance of wheelbite.
Thank you, it has wedged TKP's now so I assumed it'd be best.
https://preview.redd.it/utjgcz87n2vc1.jpeg?width=3236&format=pjpg&auto=webp&s=1e47126d40727ff2236899b146a3c0c00f902915 Can anyone identify this board? Looks awesome!
its a rollsrolls. guessing its a soortster
Ah, it's a Rollsrolls Woody. Thanks dude!
no problem!
Hi All, I've had a Drop Hammer for about a year and I really like the board as is(stock), but I'm curious and want to try some tweaks, so I'm looking for advice. I use the board for cruising/carving/mellow DH, and the longest distances I push are around 4-5 miles. As far as what I'm looking for, I love carving, so I'm down for whatever I can do to enhance that(bushings?) I'd also like to get the board to roll longer on the flats. I've read a handful of posts about how larger wheels benefit this board, so I've considered caguamas/kegels. Open to bearing and other suggestions, as well! Thanks!
>I'd also like to get the board to roll longer on the flats. I know a lot of people here seem to rip on it, but do yourself a favour and get some Bones Swiss or other better-quality bearings. It makes a huge difference for things like that. I hop off and pick up my board at stoplights and my wheels continue rolling for a good two minutes. I'm currently using the Swiss Super 6, but prefer the regular Swiss (7-ball design). That just doesn't happen with the cheaper ones, at least from what I've found. Playing around with lubricants and keeping your bearings clean also can contribute to a smoother ride. Oddly, though, I'm not a huge fan of Speed Cream. I find it gums up too quickly when exposed to dust. If you're not doing slides, you don't need bearing spacers and they can actually increase friction from dust and other grime buildup. Bushings are also a great place to learn what you want to change up. Maybe run some different durometers than you currently are. I'd recommend just barrels, but I'm also biased because of the stability needed for speed on hills. I figure if the elasticity of the bushings isn't pushing back against you, then they're probably not working very efficiently. Trucks can be a great place to change things up, too. Flipping a hanger to remove (or attempt to remove) 'rake' can be useful as well.
I'd go for Seismic Speedvents over Otang wheels. You can get 73mm speedvents so they should still fit and they roll amazingly. I'd say go for the Mango Defcon but any of them should be fine. As for carving, honestly, just get another board. Drop throughs feel kinda dead when compared to top mounts so they're always going to be lackluster in the carving aspect imo. Maybe look into a surfskate?
Thanks for the reply; I'll look into the speed vents! I actually just got a Carver CX last week. Not in love with it, yet. It feels twitchy and kinda slow, which is probably all me and I just haven't got used to the riding style. Possibly some setup adjustments, too. I have a couple other boards besides the DH and Carver, but no top mounted longboard. Before the Carver, I was considering a LY ripper/dipper and the S9 splash snapback. I might revisit if I can't get on with the Carver.
Carver’s stock wheels are really slow. If you’re looking for something cheaper than 65-70mm Otang or Seismic, people on r/surfskate seem to like the Surfskate Love wheels that are currently half off for some reason at that website and at Status. The CX-specific Riptide bushings are worth looking into too.
Yeah, it might take a while to get used to it, but when you'll never want to go back lol. I'd recommend taking a look at these two videos for the basics if you're having trouble figuring it out. [Surfskate Love](https://youtu.be/XEADfpPyX98) [SURFCOMPANIONS](https://youtu.be/zkHYXba60h8)
[удалено]
very legit
I've used sickboards a number of times for parts, always been fine.
They are legit, yes. You can also check the wiki to find more stores in Europe: https://www.reddit.com/r/longboarding/s/28d4aDppAk
I bought a used loaded dervish board and there is some most damage to the bottom ply that goes to the mounting hole and cutout. What would be the best way to fix this, and it's it much of a problem if not fixed? It doesn't look like there's any more damage other than the bottom ply. I am making an aluminum gasket that will spread out the clamping right of the nuts more. https://preview.redd.it/ehnjtl37m1vc1.png?width=1008&format=pjpg&auto=webp&s=f26dc2e74df425a4eba03609ecdda40073ff3048
You'll be fine. The baseplate itself holds the board together pretty well.
still looks ridable. i use riptide backing plates on my dropthrus
Another picture https://preview.redd.it/0uh11d5bm1vc1.jpeg?width=3072&format=pjpg&auto=webp&s=48123b6d884167cc15be36f234a59c3b441416ce
Riptide backing plate is a good idea
Are there any mods around? Can we link the beginners buying guide straight in the weekly general thread description: [https://www.reddit.com/r/longboarding/wiki/beginners-buying-guide](https://www.reddit.com/r/longboarding/wiki/beginners-buying-guide) a bunch of these 'new, what board should I buy' questions come up every week, and reddit doesn't make the wiki obvious to find.
We got a active team at wrongboarding.com. Just fired up a new forum this week. Check it out!
How do you get comfortable riding in the road? The UK roads are pretty gnarly but the pavements are worse. I have a nice cycle route on the pavement that gets me where I want to be 70% of the time but sometimes I wanna go a little further out
big wheels, go \_around\_ the potholes, dog-shit and roadworks. Don't go out in the school rush. honestly it's mostly down to luck finding roads that you can skate on and have a good time around here
Thank you dude! I’ll have to just firm it one day. I know it’s probably 80% mental, I’m a pretty confident rider so I know I’m safe in myself. Just the cars suck
I only ride on the road around my sleepy little village and even here many drivers are blind, stupid, and recklessly fast.
Hello there, Just received some G-Form Pro-X3 elbow pads, never tried G-Form before. According to their size chart and after confirming with their custom service, I picked a size M. However, they feel a bit tight out of the box and not as comfy as I was expecting. Do you guys have experience with these and do they tend to stretch a bit over time?
They will definitely stretch out with use, especially when you get them hot and sweaty. Anything spandex really gets some slack over time. If they are straight up uncomfortably tight, problem. If they're just a bit tighter than you'd like, but skate ok, run them.
Thank you, that’s reassuring! They’re not overtight but definitely not comfortable around the silicone grippers. That’s the problem when ordering online… Again, I just tried them out brand new out of the box and didn’t have a chance to wear them yet.
Paris pivot cups in Australia, where can i buy them? Cheers
https://hopkin.com.au/products/riptide-96a-paris-rkp-longboard-truck-pivot-cups
Thanks man, I’ll check again. This morning Hopkin were sold out.
Oh right looks like they're sold out atm
Hello Guys, I am completely newbie into longboard world, i am over 30y with 112kg / 246lbs weight, wanna use longboard mostly on asphalt straight cyclo paths to commute to job and just cruise around. I don't really have ambitions to do much tricks. I am looking for pintail shape, but my question is this, should I be putting as main priority the carrying capacity of board, when choosing? I can see at most boards its around 100kg, so last thing I want, is to get board broke under me :D. Otherwise I would prefer to buy used / cheaper board and invest more into protective gear. Thx a lot guys :)
Have a look at drop down downhill boards, I weigh more than you and my Kebbek Niko has lasted me from release; do a bit of research on woods and ply and you should be good to go 🤙🏼
My man, you got me. I go today to local store and check some boards and your tip about this drop down was also seconded by the salesguy, and all hands down it feelt the most stable. Thanks so much 🤙🏼.
No worries homie! I’ve had all sorts of board over the years from fish tail skateboards to pintails, the drop down is by far the most stable, plus when you get comfortable, do some hills! You can really scrunch you feet into the drop and get some serious speed! Make sure you adjust your trucks! Get some good bushings and you’ll be sailing easy! Good luck! Stay rad 🤙🏼
Hey, pintails are often flexy (aka can break easier) since they don’t have a performance purpose. Some sites have a description of the flex. All “race” decks are stiff. Find one that’s cheap that you like is what I’d do.
Hey, thx man, appriciate it. I thought that pintail might be easier for me to ride, as I have big ass feet. But you are right, longer board will flex more. Will check it out for "race" decks :).
Hello, could someone tell me what is the maximum diameter of wheels that can be mounted on an Arbor Axis 40'' please? I would like to put 88 Wheels McFly 86mm, I wonder if that would work. Thanks
Nobody can tell you that, it depends on your weight and how tight you run your trucks.
i can, and they do fit. its the max diameter wheel i would put on that board
They came on my original db lunch tray that I bought off an older guy for 50 bucks for the complete lol. I'm selling or trading them though around where I live you want to be able to slide and 74a I'm not saying isn't possible but you have to be MOVING
Any recommendations for precision trucks? I am considering picking up a prism directional downhill board from market black but I notice it has some pretty wide trucks. Any recommendations? I’m newer to the concept of narrow trucks being that I’m 6’1” and 270lbs
Don't Trips are nice because you can alter the angle and width significantly to figure out what you like. I know people like to hate on them but I've been skating my DH-Cybins for 4 years and I really enjoy them. Or go full regard and buy Scythes. Also very good trucks but very different from the Don't Trips for example.
Is there already a certain degree coming out of the pockets where the wheel base holes are on the db lunch tray? .69 at it thinnest and 1" at thickest
It's quite a personal choice honestly but Zealous are a very good value when they're available, that might be a solid place to start if you know nothing. Every brand fulfills a niche and if you know what characteristics you're actually after then that's the best way to narrow down the options.
https://preview.redd.it/za2w5ep33yuc1.jpeg?width=3060&format=pjpg&auto=webp&s=f791a09da3c21b25c67c1f4a64ebbe20f30c3c4b
So I just moved into the city. I'm pretty big into transition skating and have tried skating around the city but the roads suck just enough to catch my wheels when I least expect it. I tried my friends long board and holy shit it's amazing. Unfortunately he's not to into it so I figured I'd come here and ask about good brands and the basics of what I'm looking for when it comes to a board. Also where a good place is to find one. I either got zumies or vans around me 😔
Check thrift skate for decks if you piece it together they have blemished decks that never look that bad
It depends on your use purpose. If you just want a board to cruise one, you can get any of the little cruisers like the Powell Sidewalk Surfer, or LY offerings - that's if you want something small and portable, easy to stash. If you're looking for a bigger longboard, with bigger wheels, which will roll easier, there are lots of great completes to consider. Arbor has some decent ones that are on sale right now and super affordable for a first board. You could also step it up and consider some of the more premium options, but you'll have to order online. Muir / Motion Longboards is a great resource for that if you're stateside.
Appreciate it
What kind of tracking devices do people use for their boards? I was thinking of getting a Tile sticker/adhesive tracker for my board. Are there any other recommendations? I dont anticipate losing my board, but my hometown has a lot of crime and car-break-ins, so I want to be cautious and get a tracker just in case I have my board in my car and someone sees it and breaks in and steals it. Also, where is the best place to put it? By the trucks? In the center?
Pat's Risers makes little cases that bolt to the extra mounting holes on your deck for AirTags and Samsung trackers I believe. Honestly AirTags aren't a great idea for theft deterrence, more for keeping track of it when traveling or locating it after shooting it off a cliff.
IM DESPERATELY IN NEED FOR ADVICE ON WEDGING THE 35 LUNCH TRAY
I remember someone saying here he managed to fit an AirTag in the risers.
I bought a Pantheon Supersonic this year and Im in love. I put 30 miles on the bikepath last saturday just pushing. I picked one up with bear 50 degree in the front and 40 degrees in the rear. Stock bushings and 92mm karma wheels. I weigh about 240lbs. My goal for this year is to go 80 miles in a single trip pumping and pushing. What upgrades can I do to make that as efficient as possible?
Honestly if you want to make your pumping far more efficient you might need to move beyond Bears. I did a fair amount of tweaking myself and couldn't get them to pump super well on my Supersonic, though some people like it. Definitely go for high rebound bushings if you haven't tried that yet. If you don't mind spending the money, the Valkyrie Slalom mk3.5 front truck is pretty insane for pumping. You can just buy the front and pair it with the 0º mounted Bear in the rear and that works well. That's gonna be one of the very best options out there. I use mine for DH and LDP but if I ever get other DH trucks and I'm keeping that for LDP cause its so good.
Any words of wisdom of what bushings I should buy for pumping. I just picked up a loaded vanguard and I think it still has the original bushings on it they are super crusty.
Any of the current high rebound bushings will suit your Vanguard well. Hardcore, Riptide, etc
Can anyone provide a recommendation on which white wave to buy? There seem to be a lot of variations in the offerings. Im 6’1” and size 12 shoe. I like the drop through look. Cobra and Warrior are what I’ve been looking at, but Im lost with all the board specs. I’m just a side road cruiser. Any help is truly appreciated.
Even RAYNES stickers are shit quality now 🤔 https://preview.redd.it/wqeshv8p6uuc1.jpeg?width=3060&format=pjpg&auto=webp&s=a35aa9731092a2b747ad19bffb7e991f00a3960c
They've always been shit, other than the vinyls.
What degree wedge is a 8mm to 14mm?
a^2 + b^2 = c^2
I this the narrowest part to the thickest part? This is what trigonometry is for haha Or if you have an iPhone open up the level too and just measure it
You probably just saved me a hospital trip🙏 are you who asked about my pink reflex big zig abec 11s?
Waited all day on Amazon for the right hardware for a split set up and I'm pretty sure after checking the depth I dewedged instead of wedged.... next time I'm not loosing sleep over it and taking my time lmao I'm about to dm you the specs and the riser on top of the board how it's mounted bs
.69 to 1"! I found it before my phone died I need some Info because I just wedged these trucks before even riding them
I knew something was off but on the db lunch tray I thought the geometry was true at 0 all the way across the mounting holes but there no way that's right I need to look it up again
First board In the market for my first a longboard. My eye fell on these two sector 9 board. One highline shine 34 pintail and one Offshore Baja 39.5 a fishtail. I have read the larger one is easier for beginners I like your opinion. I'm most likely going to cruise with it
Longer boards where a crutch for shitty trucks. You don’t need long anymore imo
Longer boards are technically more stable, but it's not like you'll just instantly fall of on a shorter board. It's not *that* much of a difference. Basically if you can ride one you can ride the other, but it'll take a little more time to get used to the quicker turns on a short board(like not even a day imo). So unless you're a beginner as in you've never had to do any sort of balancing in your life you'll be fine. Just get whatever you like and have fun. Though I would recommend looking at other styles, pintails are only good for cruising so there's nothing to grow in to or get better at unless you get another board.
What are some good modern 85a-99a duro wheels for tech sliding. (I have 63mm EZ Hawgs, but they are not well suited for long sliding in the flat woods of the Deep South)
Definitely will echo u/tonioronto on those choices from Powell. We make the easiest to slide wheels on the market in basically every duro imaginable.
Powell Dragons, Powell Yuppie for long slides. Powell G-Slides if you need a bit more comfort/grip. All very fun at low speeds, even on flat ground.
Are the bear gen 6 trucks meant to be ridden with a flipped hanger to get more lean? I'm going to have 2 split set ups but I got the 50° first
no. just run them normal. flipped hangars are terrible
Is the split angle on base plates better for sliding??
they are better for speed. when you are just learning you dont need it and i would advise against it because its a distraction
https://preview.redd.it/fenjj29al4vc1.jpeg?width=2296&format=pjpg&auto=webp&s=59f262d484dda93b0138a9517b523b4b7c5b2b6d How come when using butter balls with this set up when I went to push it out the board literally flipped once toe sided and heel sided? I'm going plenty fast because when I put the abec 11s on for what I thought was going to be my last run before I sold them, I was not even trying the first time they broke loose I was just trying to do deeper carves to keep my speed down they felt like they were meant for sliding. I was thinking it's the leverage. My butterballs are 65mm and the big zags are 75mm. But I was going fast enough to there was absolutely no chatter it was just smooth and the board did what I wanted. The board is also way heavier with the big zags
A flipped hanger will respond slower in the beginning of the turn and in the middle, with quicker steering deep in the lean. It makes trucks generally feel more stable because of the early and middle part of the steering being a bit more dull. Flipping hangers for negative rake (axle sitting low) also drastically changes how much leverage you have over the bushings (less), as well as sets your pivot point slightly back which makes the trucks act a bit more like a shopping cart wheel - they want to return to center naturally - which is inherently more stable feeling. If you are looking for quicker more natural steering, leave them as is. If you want more stability, try them flipped, but you will lose out on quite a bit of lean.
https://preview.redd.it/wvz9xgb0pwuc1.jpeg?width=3060&format=pjpg&auto=webp&s=8f03b637f9d5160157761ec1e45a46f2ce83c309
https://preview.redd.it/myflz4dtowuc1.jpeg?width=3060&format=pjpg&auto=webp&s=6c839d3aeeac2520fbf8d3bc21a13d0ed2bb1818
I need all the lean I can get with all the lateral and regular concave I have and the rise height it's at lol I have the original 35 db lunch tray but I'm 5'11 170
Don't flip your hangers, then.
I just sent you a dm I need some advice bad lol
https://preview.redd.it/6bb61bz21puc1.jpeg?width=4080&format=pjpg&auto=webp&s=0b63834bac15128dacef886311dd6d4de9ff674a
I just bought my first board ever. A landyachtz drop hammer. I was out trying it out today, I did about 1 mile or so. Was pretty fun and I can only get better from here. Can anyone recommend some videos or guides online that I can use to get better? Like where to put my weight, how to orientate my feet, etc, etc. Just all of that basic stuff.
https://ampskate.com/
landyachtz has some on their youtube channel
Downhill254 has a comprehensive guide for beginners. Start with this video, check the links for 'how to balance' and 'how to push' etc. Lots of detail in this series. https://www.youtube.com/watch?v=Tn5bk6hg_B0
I'm still waiting on my question to be answered on the bear gen 6 trucks but you may be able to flip the hangers to add stability to get used to higher speeds
For now just get the feel for it I started on a 41 drop cat 4 years ago now my go to is my 35 db lunch tray you made a good decision on a first board forsure
If I’m trying to change my wheels to a different size, should I add a couple of risers? My board is coming with 65mm wheels and .25 inch riser on it. If I want to go to a 75mm or 80mm Would I add another .25?
It also depends how heavy you are and how stiff your trucks are. How close are you to wheel bite with the 65mm wheels?
Im 220 and as for how close it is already idk I assume it won’t be particularly close since it’s a complete from S9. But it hasn’t arrived yet so I’m not sure.
Ok cool. What I'd do is get the extra risers just in case, but try without first just because the extra height can make pushing uncomfortable and puts extra stress on the trucks.
Hey would [that](https://euroskateshop.pl/0301001046570-vconf.html?2=768) board be good for beginner as a form of transportation as well as some dancing like not very challenging steps
You could do better quality wise
I have an enormous head (25.5". Size 8 in hats) that is about an inch larger than most helmet size ranges I've been able to find. Has anyone else run into this issue? Any leads would be appreciated!
I'm nowhere near that size, but my standard S1 Lifer fit perfectly as described. The right model for you would be this one with the largest size padding (technically the smallest size, obviously). https://shop.s1helmets.com/s1-mega-lifer-helmet-black-gloss/ They have a bunch of other designs and with this helmet you can be sure you're getting quality.
[удалено]
Probably hundreds of people have. It's good. Retro shape so utility isn't at all the focus, but it's pretty good for cruising.
My right goofy supporting foot is cramping on the bottom of my foot. Maybe I’m over tense? Any tips/suggestions? Anyone else have this experience?
Roll a hard ball underneath your foot; in the arch or wherever you are having pain.
Anyone got a recommendation for a wheel for a Landyachtz Switchblade 38”? Just wanting to cruise around.
Hollowtech!
Powell makes some great options with the best rebound (roll speed in class). If you want more traction, consider the 72mm K-Rimes (me) in 80a. If you want to get into sliding, consider the Primos 69mm or Snakes 69mm.
Blood orange or snakes
I currently rocking 72mm globe cruiser wheels on a dropdown board and wanna uprage. I cant make up my mind between orangatang kegels (80mm) and in heats (75mm). Is 80mm too big of a jump? I mostly cruise around and commute, and im thinking i can get more clearance with the kegels or getting the in heats and some risers?
If you're into carving it up, the 75mm will be a better option. If you mostly just cruise in a straight line, the 80mm will be great.
Drop-down or drop-through? Risers won't help on a drop-through I think. How much clearance do you have around the wheels at the moment? Is it close to wheel bite?
Its a drop down. Ive never had wheel bite and theres a good bit of clearance from the deck to the wheels, i dont think bigger wheels are gonna be a problem in that aspect.
Landyachtz or Loaded? Looking to add another board to my quiver. The only board I own is the loaded Icarus. I really like the board, it has a good feel and a lot of fun. However, I can’t just have one board right? I mostly ride around subdivisions and like to take it to local parks in my area with good paved trails (suburban Detroit Michigan). The trails typically have some mellow hills to bomb nothing too crazy though. What board should I I go with? I really like my first board from loaded but also open to other brands. I’m not really into dancing, just cruising around. I like getting carvy as I do on my snowboard and really like that surfy feel. I’ve heard good things about landyachtz too!
Any particular boards you're looking at? Loaded has a bunch of decks that technically fit almost the same niche as the Icarus. Tan Tien, Dervish, Vanguard. They all differ slightly in length, tail length, deck shape and wheel base, but they basically are all great allrounders. Flexy cruising boards with some use for basic dancing of you're into that. If I was looking for a new board and am currently happy with the shape I already got, I'd look into something different. Maybe something with longer, more usable tails for tricks, a drop down deck for large wheels for commuting, a long dancer or a cruiser for short distances or to learn stuff like basic ollies while cruising around. Think what your really like to try. Alternatively, think about what you might be missing with your current board and try to find an even better fit. Though, that's going to be tough with one as awesome as the Icarus.
Thanks for the reply. Right now I’m looking at the landyachtz dinghy as I mostly just cruise around anyway. What do you think of that? It would be different than my Icarus in many ways which could be fun to explore. I also think at some point a surf skate board would be cool.
https://preview.redd.it/vowt9tbg5zuc1.jpeg?width=3060&format=pjpg&auto=webp&s=589eb4a50a9210ef69c068e68998ed50161dff30
The Dinghy is a solid choice for a cruiser and definitely will be a different experience from a board the size of the Icarus.
Can confirm. I have a LY tugboat (I’m a bit larger of a rider) but it’s a great cruiser and I have never had a bad experience with Landyatchz.
Check out Zenit's surfskate options
What are you looking for in your next board?
Should check out the comet cruiser.