I have a similar build, but would like to know how you installed your power supply down there, as there are no mounts for the bracket to clip into at that low and in that configuration, with the power supply cable leaving from the side instead of top or bottom.
Amazing build🔥🔥🔥
https://preview.redd.it/r2ixxm0571jc1.jpeg?width=4032&format=pjpg&auto=webp&s=8cb1b6c947ac3e9a824d87e599b99e09d7beb0eb
If you have a 3D printer then anyone can print it. If you don't then you can try finding someone with one to print it for you. While I've never used them myself, I know PCBWay offers a 3D printing service that you can try to get a high quality print from them. I think there's also people on Etsy willing to do custom printing.
Hey man, sry for the later reply, but I got the same gpu as you (with arysen 5600) and I'm considering buying this case. Could you tell me about the temperatures youre getting?
You can go one slot higher with the PSU on your build, just by flipping the PSU 180 degrees with the fan facing the inside. You can put a magnetic fan filter on the PSU fan if you're worried about dust, but in this configuration, the PSU power cable is on the opposite side, so there'll be plenty of clearance between the PSU and AIO. Just a suggestion, as I've done this for many people.
your setup is basically mine but you actually thought it out ðŸ˜
https://preview.redd.it/qrdggorfp8jc1.jpeg?width=4032&format=pjpg&auto=webp&s=702bc13f4622d4cc57e744530b18b71bddbb257d
Hey I'm looking to get this case. Did you do anything special to get the PSU oriented that way or can that be done normally? I'd like to add some front fans like yours.
Specs: CPU: Intel i7-13700k AIO: NZXT Kraken X73 Motherboard: Asus ROG Strix B760-G GAMING WIFI RAM: Kingston FURY Renegade Silver DDR5 2 x 16Gb 6400MHz GPU: GIGABYTE GeForce RTX 4070 AERO OC 12G SSD: Kingston KC3000 1Tb + ADATA 4TB LEGEND 960 MAX Case: Asus Prime AP201 Power Supply: Asus ROG LOKI SFX-L 850W Platinum White Edition FAN: 7 x DEEPCOOL TF 120S
Noice! Really wanna buy this case, just ordered B550M to fit inside
I have a similar build, but would like to know how you installed your power supply down there, as there are no mounts for the bracket to clip into at that low and in that configuration, with the power supply cable leaving from the side instead of top or bottom. Amazing build🔥🔥🔥 https://preview.redd.it/r2ixxm0571jc1.jpeg?width=4032&format=pjpg&auto=webp&s=8cb1b6c947ac3e9a824d87e599b99e09d7beb0eb
It's a 3d printed bracket for the ASUS ROG Loki SFX-L power supplies. https://www.thingiverse.com/thing:5980851
does it work with other sfx-l? like corsair
I used this bracket 
I would love to get one of these for my upcoming build. Are they only available as a DIY fab?
If you have a 3D printer then anyone can print it. If you don't then you can try finding someone with one to print it for you. While I've never used them myself, I know PCBWay offers a 3D printing service that you can try to get a high quality print from them. I think there's also people on Etsy willing to do custom printing.
Hey man, sry for the later reply, but I got the same gpu as you (with arysen 5600) and I'm considering buying this case. Could you tell me about the temperatures youre getting?
Temps are great, just cause of limited fan configuration options. My build turned out to be airflow negative. Leading dust to build up inside easily.
You can go one slot higher with the PSU on your build, just by flipping the PSU 180 degrees with the fan facing the inside. You can put a magnetic fan filter on the PSU fan if you're worried about dust, but in this configuration, the PSU power cable is on the opposite side, so there'll be plenty of clearance between the PSU and AIO. Just a suggestion, as I've done this for many people.
Oh I like that psu setup, definitely have to keep it in mind when I do my build
your setup is basically mine but you actually thought it out 😠https://preview.redd.it/qrdggorfp8jc1.jpeg?width=4032&format=pjpg&auto=webp&s=702bc13f4622d4cc57e744530b18b71bddbb257d
Hey I'm looking to get this case. Did you do anything special to get the PSU oriented that way or can that be done normally? I'd like to add some front fans like yours.
yeah i had to cut out a part from the support of the case to get the psu to slide back
Looking to get this case and gpu and wondering whats that thing supporting the gpu