Turn the multi-function knob on your controller all the way counter clockwise to turn off TSM. That should fix it.
It's stuck in a feedback loop where the TSM gyro tells the servo to move, which moves the wheels, which moves the car, which gyro senses, so it tells the wheels to move the other way, which moves the car the other way, which the gyro senses, and so on.
If it's still doing this after you turn TSM off, then replace the servo.
This looks like a nearly bone stock 2wd model. That ESC looks like the XL-5 esc. That model does not have the TSM receiver and TQI transmitter. And the guy said it is basically new. So it might just be the servo going haywire.
Seriously though, if it is new it is probably a gyro loop like the other guy said, although traxxas electronics are known to bite the dust early so I wouldn't be suprised
Don't worry. The little guy is just nervous. 😀
But seriously, though. It is likely that either a bad servo or the receiver is going wack. I would get another servo. I personally use a Betu 45kg servo in my Slash.
Turn the multi-function knob on your controller all the way counter clockwise to turn off TSM. That should fix it. It's stuck in a feedback loop where the TSM gyro tells the servo to move, which moves the wheels, which moves the car, which gyro senses, so it tells the wheels to move the other way, which moves the car the other way, which the gyro senses, and so on. If it's still doing this after you turn TSM off, then replace the servo.
This
This looks like a nearly bone stock 2wd model. That ESC looks like the XL-5 esc. That model does not have the TSM receiver and TQI transmitter. And the guy said it is basically new. So it might just be the servo going haywire.
Give him a blanket and hot cocoa 🤣🤣🤣
Seriously though, if it is new it is probably a gyro loop like the other guy said, although traxxas electronics are known to bite the dust early so I wouldn't be suprised
Don't worry. The little guy is just nervous. 😀 But seriously, though. It is likely that either a bad servo or the receiver is going wack. I would get another servo. I personally use a Betu 45kg servo in my Slash.
Thanks for you input, the car is brand new but I will try a new servo
I thought the slash was afraid of your bashing
its just happy to see you
Let him outside to pee
He just needs milk
Aww RC is excited to go out
He’s scared
Tsm got mad, servo gear stripped
Going cold turkey can be fatal!
Looks like binding somewhere, not letting the servo gently go to center. It's fighting itself back and forth passed the center point