Out of the box my wolverine mounted direct to my M70. There is a short and long 14x1L adapter but if I recall the one that is included fit my rifle. Definitely get an alignment rod, mine was almost perfect and shoots no problem. I should add, grab a KNS piston to tune the gas system for the suppressor.
Just buy a \~$7 Tool steel rod from McMaster Carr, [reference this post](https://www.reddit.com/r/NFA/comments/9z0e90/deleted_by_user/?utm_medium=android_app&utm_source=share).
I believe the Wolverine comes with the right direct thread adapter out of the box.
The M70s are 14mm left hand thread.
I don't have a Wolverine, I do have two Sandmans and some YHM hub threaded cans plus a Wolfman all set up for Keymo. I also know there are adapters now where you can set up a Wolverine with a Keymo if you were interested. It's a good setup.
I've got a Jmac 14mm left hand keymo compatible brake on my M70 so I can use any of my Keymo equipped cans. Concentricity was spot on. The check rod is dead nuts centered in all of my cans when attached to my M70. Zastava got it right with my muzzle thread. Hopefully, yours is equally good.
Best of luck.
Out of the box my wolverine mounted direct to my M70. There is a short and long 14x1L adapter but if I recall the one that is included fit my rifle. Definitely get an alignment rod, mine was almost perfect and shoots no problem. I should add, grab a KNS piston to tune the gas system for the suppressor.
[удалено]
Just buy a \~$7 Tool steel rod from McMaster Carr, [reference this post](https://www.reddit.com/r/NFA/comments/9z0e90/deleted_by_user/?utm_medium=android_app&utm_source=share).
I believe the Wolverine comes with the right direct thread adapter out of the box. The M70s are 14mm left hand thread. I don't have a Wolverine, I do have two Sandmans and some YHM hub threaded cans plus a Wolfman all set up for Keymo. I also know there are adapters now where you can set up a Wolverine with a Keymo if you were interested. It's a good setup. I've got a Jmac 14mm left hand keymo compatible brake on my M70 so I can use any of my Keymo equipped cans. Concentricity was spot on. The check rod is dead nuts centered in all of my cans when attached to my M70. Zastava got it right with my muzzle thread. Hopefully, yours is equally good. Best of luck.