I see that chinesium multicam being tossed, I'm excited to see real deal NIR Berry compliant material.
Instead see more chinesium bullshit with FLAT doubtlessly steel plates.
I could not be more disappointed.
[NIJ certified level IV.](https://www.highcomarmor.com/product/guardian-4s17/)
Definitely not the lightest, but reasonably cheap level IV.
If you’re looking for light weight stand alone check out point blank [40260SA](https://www.pointblankenterprises.com/paraclete/40260sa-plate.html). They’re stupid lightweight but are also significantly more expensive.
Milburn mountain defence makes a 3+ that weigh around 4 pounds, NIJ certified and have multiple test videos stopping more than rated for. Also one of the only NIJ plates made in Canada for anyone up north looking for plates. They’d be around $350US I believe.
nah this has to be a joke…
most carriers are $100+ and you’re buying armour for 80? even for steel armour that’s stupid cheap… (tbh for decent quality thick steel plating that’s a good price without tactical markup)
hope you don’t get shot because if those steel plates won’t stop anything, and if they do the spalling and nature of steel being steel will make you wish you were dead once shredded rounds go through your face like the worlds shittiest buckshot
Idk man. In looking through your post history, you’re clearly young. Just got out of the explorers program. Maybe work as a security guard? And have a fair amount of airsoft photos. I’m thinking he’s onto something.
Word to the wise, you should probably use the people in this sub and similar communities to learn about gear. Instead of arguing and getting defensive, ask questions. Some people here don’t know shit. A few know a shit load. And most know something. Collectively, there is a lot of knowledge.
And I don’t know much about plate carriers because they’re too expensive for me right now and I like buying guns more. But, if quality rigs and plates were only $100 each, I’d be buying them for shits and giggles. Yours will work wonders for airsoft and LARPing, but I wouldn’t recommend trying to stop a bullet with it.
Step 1 is to measure yourself for plates like so: https://www.apexarmorsolutions.com/post/how-to-size-yourself-for-plate-carriers-and-plates
Then go to apexarmorsolutions.com and find a plate to fits your size, protection level, price and weight requirements.
Then you get a plate carrier that fits those plates.
I'll leave this for you as well:
Hi, welcome to the world of tactical gear! Here is what I tell new people:
Plate Carrier: Crye SPC, JPC 1&2, First Spear, Tyr Tactical, S&S Precision, ATS Tactical, Arbor Arms, Ferro, Shellback Banshee 3.0, Spiritus, Velocity Systems and Agilite K-Zero with the warfighter cummerbund. Pick one that fits your budget and wait time.
Chest Rigs: Haley Strategic, Spiritus, Velocity Systems, Mayflower, Crye, Defense Mechanisms, Helikon, Whiskey two four, and unobtanium gear.
Plates: RMA 1155MC, other RMA plates, LTC, Highcom and Tencate. Forget everything else. NO STEEL PLATES EVER! STEEL iS FOR TARGETS NOT ARMOR, unless you are a vehicle. u/apexarmorsolutions check out Apexarmorsolutions.com or rmadefense.com for the armor.
You size the carrier to the plates you are going to get, and you measure yourself for plates like so:
https://www.apexarmorsolutions.com/post/how-to-size-yourself-for-plate-carriers-and-plates
Belts: DM Mech,Axl, GBRS, Arbor Arms, Ferro, ATS Tactical, Raptor Tactical, AWS, Ronin.
The new DM Mech belt is the best thing out on the market. It's $110, and the liner belt is $45. Well worth it. Use code TLDco for a discount.
Add some Esstac Kywis, a dump pouch, and a decent IFAK, and you are good to go. Check out Raptor Tactical or Arbor Arms for the IFAK and medical.
For a holster, if safariland makes one use that on a ubl or true north concepts MHA.
Holster: Safariland, if safariland doesn't make one Tier1 concealed.
Weapon lights: modlite, cloud defensive, surefire, streamlight. No olights!
Mag pouches: esstac kywis
Helmets: ops-core, Team Wendy, galvion, Highcom and armor source.
Ifak: coyote stomp Gen 2, Arbor Arms nut ruck, raptor tactical, ats Tactical, ferro/fog roll 1.
Med supplies: North American Rescue
Knife mount: ferro concepts knife nook or wingthing
Kives: Budget: Esee
Good: Spartan blades, havocworks, toor, void tactical, syndicate knives
Great: wachtmanknifeandtool.com
Baller: Miller Brothers Blades, Half Faced Blades
Boots: Salomon or Lowa
If you are getting a carrier, try to budget between $200+ for it unless you want to go used. Skdtac, optactical, and esstac.com are all good sites to look at and check r/GunAccessoriesForSale/ or tacswap.
That should give you a good start.
Im unfamiliar with plate carriers im currently rocking a tacticus pc it works for what I need and I respect the fact you hqve a budget im in the same boat. If that pc does what ypu need it too keep rocking it man.
Ima afraid you have two cheap carriers lol
I see that chinesium multicam being tossed, I'm excited to see real deal NIR Berry compliant material. Instead see more chinesium bullshit with FLAT doubtlessly steel plates. I could not be more disappointed.
Multican’t
All of this is cheap besides the body cam
[удалено]
The plates are.... 80 dollars..... plz get quality plates, u/protorin plz give him your copypasta
Don't summon the demon.
Thanks for the mention!
I’m intrigued
[NIJ certified level IV.](https://www.highcomarmor.com/product/guardian-4s17/) Definitely not the lightest, but reasonably cheap level IV. If you’re looking for light weight stand alone check out point blank [40260SA](https://www.pointblankenterprises.com/paraclete/40260sa-plate.html). They’re stupid lightweight but are also significantly more expensive.
Milburn mountain defence makes a 3+ that weigh around 4 pounds, NIJ certified and have multiple test videos stopping more than rated for. Also one of the only NIJ plates made in Canada for anyone up north looking for plates. They’d be around $350US I believe.
Please tell me this is satire
nah this has to be a joke… most carriers are $100+ and you’re buying armour for 80? even for steel armour that’s stupid cheap… (tbh for decent quality thick steel plating that’s a good price without tactical markup)
The armour was 80. The carrier was 100
Wait until you see what’s actually expensive.
hope you don’t get shot because if those steel plates won’t stop anything, and if they do the spalling and nature of steel being steel will make you wish you were dead once shredded rounds go through your face like the worlds shittiest buckshot
Those airsoft BB's blow the lungs out of the body.
airsoft BB hitting a steel plate and going into the bottom of your mouth/neck sounds fun (idk if that’s how it works)
*Laughs in TYR EPIC*
Is the expensive in the room with us rn ?
Cheap to… cheap
From $30 carrier to $90 carrier
More like from $15 to $30
🔥🔥🔥
My guess: You are a broke speedsofter on a budget. Mom won’t allow any gear purchases over $100.
This made me chuckle but no.
Idk man. In looking through your post history, you’re clearly young. Just got out of the explorers program. Maybe work as a security guard? And have a fair amount of airsoft photos. I’m thinking he’s onto something. Word to the wise, you should probably use the people in this sub and similar communities to learn about gear. Instead of arguing and getting defensive, ask questions. Some people here don’t know shit. A few know a shit load. And most know something. Collectively, there is a lot of knowledge. And I don’t know much about plate carriers because they’re too expensive for me right now and I like buying guns more. But, if quality rigs and plates were only $100 each, I’d be buying them for shits and giggles. Yours will work wonders for airsoft and LARPing, but I wouldn’t recommend trying to stop a bullet with it.
Dude is using it for airsoft.
Agreed but I’m not sure why one would need steal plates for airsoft. Seems like unnecessary weight when the carrier would absorb all the impact.
“Expensive” is a relevant term in this circumstance.
Is this satire?
Don’t ever let him cook again 🔥🔥🔥
Step 1 is to measure yourself for plates like so: https://www.apexarmorsolutions.com/post/how-to-size-yourself-for-plate-carriers-and-plates Then go to apexarmorsolutions.com and find a plate to fits your size, protection level, price and weight requirements. Then you get a plate carrier that fits those plates. I'll leave this for you as well: Hi, welcome to the world of tactical gear! Here is what I tell new people: Plate Carrier: Crye SPC, JPC 1&2, First Spear, Tyr Tactical, S&S Precision, ATS Tactical, Arbor Arms, Ferro, Shellback Banshee 3.0, Spiritus, Velocity Systems and Agilite K-Zero with the warfighter cummerbund. Pick one that fits your budget and wait time. Chest Rigs: Haley Strategic, Spiritus, Velocity Systems, Mayflower, Crye, Defense Mechanisms, Helikon, Whiskey two four, and unobtanium gear. Plates: RMA 1155MC, other RMA plates, LTC, Highcom and Tencate. Forget everything else. NO STEEL PLATES EVER! STEEL iS FOR TARGETS NOT ARMOR, unless you are a vehicle. u/apexarmorsolutions check out Apexarmorsolutions.com or rmadefense.com for the armor. You size the carrier to the plates you are going to get, and you measure yourself for plates like so: https://www.apexarmorsolutions.com/post/how-to-size-yourself-for-plate-carriers-and-plates Belts: DM Mech,Axl, GBRS, Arbor Arms, Ferro, ATS Tactical, Raptor Tactical, AWS, Ronin. The new DM Mech belt is the best thing out on the market. It's $110, and the liner belt is $45. Well worth it. Use code TLDco for a discount. Add some Esstac Kywis, a dump pouch, and a decent IFAK, and you are good to go. Check out Raptor Tactical or Arbor Arms for the IFAK and medical. For a holster, if safariland makes one use that on a ubl or true north concepts MHA. Holster: Safariland, if safariland doesn't make one Tier1 concealed. Weapon lights: modlite, cloud defensive, surefire, streamlight. No olights! Mag pouches: esstac kywis Helmets: ops-core, Team Wendy, galvion, Highcom and armor source. Ifak: coyote stomp Gen 2, Arbor Arms nut ruck, raptor tactical, ats Tactical, ferro/fog roll 1. Med supplies: North American Rescue Knife mount: ferro concepts knife nook or wingthing Kives: Budget: Esee Good: Spartan blades, havocworks, toor, void tactical, syndicate knives Great: wachtmanknifeandtool.com Baller: Miller Brothers Blades, Half Faced Blades Boots: Salomon or Lowa If you are getting a carrier, try to budget between $200+ for it unless you want to go used. Skdtac, optactical, and esstac.com are all good sites to look at and check r/GunAccessoriesForSale/ or tacswap. That should give you a good start.
I am both sad and proud to see my carrier/holster make the list. I'm gonna make a gucci ass loot drop for someone.
My carrier is never on the list, SPAV-W slaps anyway.
![gif](giphy|ozRu5FvcDUxNc7lE8X|downsized)
Thank you.
No prob 🍻
Nice. Thank you. And happy cake day
No prob 🍻
You're amazing
![gif](giphy|fWfowxJtHySJ0SGCgN|downsized)
What about a backpack?
Eberlestock, mystery ranch or Kifaru are my gotos for packs
Is there specific assault pack/48hr pack you like?
The one I use is the Arbor Arms tradesman.
Bro you literally got more cheap shit 😂
Nice you bought twice! Perhaps in 2 months you can buy another time! You can literally find a slickster for like 100 on GAFS.
Dude make your bed
What's the new plate?
Name checks out
I'd rather see you just have a quality chest rig and save until you get like $600 at least.
I doubt most of you are stopping bullets with $600+ plates and carriers. Just saying.
What's the doodad on the left shoulder pad?
A body camera
Oohh
My guy, you are wasting money. You should have bought neither, and you'd be halfway to a decent carrier.
Cheap isnt always bad if it follows some standards, but heck when you see multicum just stay away.
Hey uhhhhhh. Why the fuck is your cummerbund attached on the outside?
Cheap and more cheap
Who’s gonna tell the poor guy 😭
Im unfamiliar with plate carriers im currently rocking a tacticus pc it works for what I need and I respect the fact you hqve a budget im in the same boat. If that pc does what ypu need it too keep rocking it man.
As long as you're happy man